Arduino Touchscreen Display - Using a Resistive Touchscreen

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 มี.ค. 2024
  • Today we’ll learn how touchscreen displays work, both Resistive and Capacitive. We will also create a simple touchscreen interface using an inexpensive Arduino shield.
    Detailed Article with code - dronebotworkshop.com/touchscr...
    More articles and tutorials at dronebotworkshop.com
    Connect on the DroneBot Workshop Forums! - dronebotworkshop.com/touchscr...
    Today we are back in the workshop, working with an inexpensive Arduino LCD Touchscreen Display Shield.
    We’ll begin by looking at how touchscreens work, both the Resistive and Capacitive variety. Then we’ll check out a great resource to download all of the spec sheets, libraries, and sample code for dozens of popular LCD displays.
    After we get some sample code for pour resistive touchscreen display we will run through it and put our display to the test.
    Finally, we’ll design a simple touchscreen interface to control three LEDs. You can use it as the basis for a more complex design.
    Here is a breakdown of today's video:
    00:00 - Introduction
    03:13 - How touchscreens work
    06:57 - Look at touchscreen shield
    11:09- Obtaining touchscreen software
    14:14 - Installing libraries and demos
    16:24 - Touchscreen demos
    23:13 - Arduino hookup
    24:18 - Arduino sketch
    34:48 - Our Interface in action
    This isn’t the last time we’ll be looking at touchscreens, I have a capacitive touchscreen that I'll be showing you very soon.
    So let's keep in touch!
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 196

  • @rudolfherwig7279
    @rudolfherwig7279 3 ปีที่แล้ว +7

    Hi DroneBot, i like your clear pronunciation! It's very often hard to understand some english speaking bloggers because my native language is german. But following you is very easy.
    Even your recitation is very interesting and I can participate a lot.

  • @xno_elysiumx3744
    @xno_elysiumx3744 2 ปีที่แล้ว +14

    Anyone noticed that he uses multiple cameras and often change his perspective from one to another camera like in professional TV shows. This Channel is 100% quality!

    • @n_kliesow
      @n_kliesow 8 หลายเดือนก่อน

      They were very random to me 😂 I rewind a bit to hear he uses it for different topics but I couldn't notice a schema

  • @Mystic0Dreamer
    @Mystic0Dreamer 4 ปีที่แล้ว +74

    Yet another excellent video. Your attention to detail makes you the King of How To. It's comforting to see you back with your mind-blowing videos. Thank you so much for what you do.

  • @acestudioscouk-Ace-G0ACE
    @acestudioscouk-Ace-G0ACE 2 ปีที่แล้ว +1

    Excellent, a great learning resource! I learn loads every time I come to the Workshop!

  • @insoft_uk
    @insoft_uk ปีที่แล้ว +1

    Demos I find are great to test the product that it works, the first one cycles through the R G B which I think is the most useful checking for dead stuck or lazy pixels

  • @MiCoopRS
    @MiCoopRS 3 ปีที่แล้ว +1

    WOW, all your videos including the very OLD ones, 2019...even...I just or have already subscribed and continue to spend hours watching and then applying the things I have followed along on....sometimes, my project does not work at first, however, seems I am a good trouble shooter. I have purchased 5 tiny Nano brds, to make the projects smaller and I'd rather install the working Nano, v2 a Arduino UNO R3, but the first project I tried, well, the computer could not detect the usb...Oh it could be a BAD cable, yet there was power....OH WELL, this is the FUN or learning...Starting from NANO to UNO... I'll keep researching... I wanted to REACH OUT and say, YOUR stuff is amazing... keep up the Great work... I had a few days off work and have just begun my journey back into Electronics.... not yet retired but you got to keep the BRAIN exercised..... Merry Christmas and Looking forward to a better, we all hope..... 2021

  • @peterhuesmann3956
    @peterhuesmann3956 2 ปีที่แล้ว +1

    Fantastic, just what I was looking for!

  • @YFtouchscreen
    @YFtouchscreen 10 หลายเดือนก่อน

    So detailed explanation.Great tutorial!Thanks for your sharing.

  • @thomasmcann9474
    @thomasmcann9474 3 ปีที่แล้ว +2

    Your work on TH-cam should be shared more, every kid needs to see your work, I think it should be compulsory, the tech is there to enslave machines and get them to work for us

  • @geoffthomas8528
    @geoffthomas8528 4 ปีที่แล้ว +5

    Hello, well impressed with your presentations videos in the DroneBot workshop, Your teaching style is without waffle, to the point, informative and well structured. I am now revisiting after many years the Arduino and Raspberry prototyping tools. However, what I also found interesting from your videos, was the design layout of your workshop. As I am now retired I want to revisit a lot of the projects that I have shelved over the years.
    First things first I want to build a compact but well facilitated workshop that will meet all my requirements from electronics, metal work and woodworking. Would it be possible for you to make a short video outlining how you designed and facilitated your workshop. I thing this could be of great interest to others like me. thank you once again for your commitment to helping others.

  • @lorinfortuna1547
    @lorinfortuna1547 3 ปีที่แล้ว +2

    A+ content. covers most of the "Why is that?" questions :)

  • @forrestberg591
    @forrestberg591 4 ปีที่แล้ว +1

    Just discovered your channel. Wow! What great content for people interested in this sort of stuff. Disappointed I hadn't stumbled upon it sooner. Subscribing and planning to watch all your old Arduino vids!

  • @EL34XYZ
    @EL34XYZ ปีที่แล้ว

    I messed up and bought a 3.5 LCD without touch from Ali Express. I ordered the correct one with touch. Looking forward to using a touch screen

  • @raysanders332
    @raysanders332 3 ปีที่แล้ว +1

    I should have watch your video three days ago, thanks. Excellent video. Best ever.

  • @redst292
    @redst292 2 ปีที่แล้ว

    Your video is inspiring. I've never thought a touchscreen can be used with an Arduino.

  • @jimmymark8232
    @jimmymark8232 4 ปีที่แล้ว +10

    Great work, a very good technical teacher, keep up the good work of sharing 👍

  • @hubertmargreiter3508
    @hubertmargreiter3508 3 ปีที่แล้ว +2

    Excellent presentation, thanks for uploading.

  • @fatonisodiq9341
    @fatonisodiq9341 5 หลายเดือนก่อน

    this is the best teaching channel

  • @anonymous.youtuber
    @anonymous.youtuber 3 ปีที่แล้ว +2

    Brilliantly explained, as usual ! 👍

    • @moroart4566
      @moroart4566 2 ปีที่แล้ว

      please can i know ..what's the launguage he used it ?

  • @justinw.2376
    @justinw.2376 2 ปีที่แล้ว +1

    Best explanation of the touch screen I’ve found. This helped me fix the issue I was having with my screen. Thank you!!!!

  • @donaldwright2426
    @donaldwright2426 4 ปีที่แล้ว +1

    Thanks for this video tutorial and learning. Because of you, I purchased the same touchscreen and tested it today! Wow, this is fun! Can you imagine that in the early 90, I prototyped a wire-wrapped MC68HC11 to create something like an Arduino and I wanted to interface to an LCD? At that time, LCD screens were extremely pricy!
    Here I'm, some 25-30-year latter, getting back in the µcontroller world and with the internet, information and tutorials are so easy to find. Luckily, I found your channel on youtube. I found your videos so informative that I've joined your newsletter as of today (2020-01-09).
    Again, thanks for the quality of your video.

  • @steveweiser2792
    @steveweiser2792 3 ปีที่แล้ว

    Very Nicely explained, I am an electronic enthusiast and a new subscriber to your channel.

  • @MrDe0
    @MrDe0 3 ปีที่แล้ว +1

    man your channel is underrated !!

  • @incorporeal3793
    @incorporeal3793 3 ปีที่แล้ว +1

    Looking to build a DIY star tracker and this is just the thing I was looking for, to add a touchscreen for real-time speed adjustment.

  • @grandtitan7967
    @grandtitan7967 4 ปีที่แล้ว +3

    This helped me so much i am a begginer in arduino and programing and all that stuff and you really helped me a lot... I appreciate your work very much!

  • @osamarabee3927
    @osamarabee3927 4 ปีที่แล้ว +3

    sir you are a great teacher i really love the way you explain stuff i hope you still in a good shap and health and happy for ever i love you man

  • @sarkybugger5009
    @sarkybugger5009 4 ปีที่แล้ว +18

    Congratulations on the 100k subscribers!

    • @sarkybugger5009
      @sarkybugger5009 3 ปีที่แล้ว

      @Harsha Addanki Check the date of my post!

  • @daveharkin4731
    @daveharkin4731 4 ปีที่แล้ว +1

    Just like to say thank you for your videos, I really appreciate the time and effort you put into them, please keep them coming

  • @abdalrhmanalaa9982
    @abdalrhmanalaa9982 10 หลายเดือนก่อน

    realy iam a big fan of usrs i have learned many thing from you sir you are realy super i love our videos realy thank you for every thin you done and been doing

  • @wendygrant2735
    @wendygrant2735 ปีที่แล้ว +1

    Well explained as always.👍👍👍

  • @tonyano9191
    @tonyano9191 10 หลายเดือนก่อน

    Great advice saved my job!

  • @tinkmarshino
    @tinkmarshino 4 ปีที่แล้ว +1

    good to have you back... hope you got some good vacation time in... I got some nice fishing in while you were gone... Thanks for the touch screen video.. I have been wanting to use one but have not found a reliable video to follow.. Now though I am going to order mine and do my little project.... thanks again for the share and carry on Bill..

    • @manwenqin5920
      @manwenqin5920 3 ปีที่แล้ว

      What products do you need to order for your project?

    • @tinkmarshino
      @tinkmarshino 3 ปีที่แล้ว

      @@manwenqin5920 the same kind that Bill has there why? Do you have some?

    • @manwenqin5920
      @manwenqin5920 3 ปีที่แล้ว

      @@tinkmarshino I have, Can you tell me about the product model? I can help you find it.

    • @tinkmarshino
      @tinkmarshino 3 ปีที่แล้ว

      @@manwenqin5920 Well I am not exactly sure which one I want.. Send me the site for your outfit and I will go and look to see. Thanks

  • @robbyprust
    @robbyprust 4 ปีที่แล้ว +2

    Nice video , you always explain things in detail . I have that same display and the touch screen part stopped working . Good display except for that ,but your explanation of how the touch screen works has me exploring what might be wrong with it. They are so expensive though

  • @dualxsurvival155
    @dualxsurvival155 2 ปีที่แล้ว

    Got my sub love how u lay out the information

  • @Ivor_Nastyboil
    @Ivor_Nastyboil 4 ปีที่แล้ว

    Good to see you back. Excellent video as usual. The only thing I don't like about your videos is the massive tool envy I get when watching them :).

  • @bobengelhardt856
    @bobengelhardt856 7 หลายเดือนก่อน

    Very professional video - thank you for presenting it. At the end you mention that there will be another video on capacitive TS & other examples. I can't find that video - do you have a link?

  • @raagamparmar179
    @raagamparmar179 4 ปีที่แล้ว +6

    Hmmm...... Interesting. The display can be used to make an interface for home automation system, as in the project made in the video.

  • @khukuma
    @khukuma 4 ปีที่แล้ว

    Love to see you back. I was worried as you were not uploading videos for the last several weeks.
    Salutes from Pakistan.

  • @jnkmal9519
    @jnkmal9519 3 ปีที่แล้ว +3

    "...we're back in *TOUCH* today." I see what ya did there. Nice!

  • @Corbald
    @Corbald 4 ปีที่แล้ว +2

    The biggest drawback of resistive screens is that it's relatively easy to wear a groove into the surface, especially along UI elements like scroll bars.

  • @cheerstolove5078
    @cheerstolove5078 ปีที่แล้ว +1

    Hie... I have a request. May you kindly do a series on QR or BarCode modules such as the RT830C or 870. I could not find any solid tutorials on those

  • @kenkondasilva2488
    @kenkondasilva2488 4 ปีที่แล้ว +2

    Thank you!!! This is excellent.

  • @ALGH2101
    @ALGH2101 2 ปีที่แล้ว

    Now that's a nice set of tools! Whats your favorite brand, type ,and size cutters for cutting the ends off things like R, C , L's leads that are not needed and sticking out from soldered circuits?

  • @michaeldickerson2873
    @michaeldickerson2873 3 ปีที่แล้ว

    You and your videos are awsome

  • @TheElectronicDilettante
    @TheElectronicDilettante ปีที่แล้ว

    This is the only person in front of the camera ,on TH-cam, that's more concerned with content accuracy and production quality. He should be on PBS or some other educationally driven outlet. In a perfect world, Bob Ross would still be painting Happy Trees followed by The Drone Bot W.S. to give us a well rounded Sunday morning lineup.

  • @abuwaleed1191
    @abuwaleed1191 3 ปีที่แล้ว

    hi, very good video again, I question, is there capacitive display available like this Resistive ?

  • @abdillahmursyid7616
    @abdillahmursyid7616 3 ปีที่แล้ว +1

    great video.. i want to ask, can i make pen tablet with arduino? something like wacom ctl, no lcd but just like trackpad

  • @michaelschmidt1700
    @michaelschmidt1700 3 ปีที่แล้ว +1

    Thank you for this video, it helps me a lot. But could you please explain how to add a MicroSD Card Adapter to the display, because I use a Arduino Mega 2560 and I need the pictures from the SD Card for my project.

  • @mecatx
    @mecatx 3 หลายเดือนก่อน

    Great video. I am trying this setup with a DHT22. How do i get power tot he DTH22 form the mega arduino Thank you for great videos.

  • @josephanthony9294
    @josephanthony9294 4 ปีที่แล้ว +1

    Excellent video as ever. I have an identical board where all the demos work but will not accept any touch input. can anytone tell me which pins I can use to measure the touch resistance. I am beginning to wonder whether screen is faulty. Thanks

    • @fireteamomega2343
      @fireteamomega2343 3 ปีที่แล้ว

      There's so many different screen shields usually if it doesn't work it's because you have the wrong library drivers ILI9486...81...84 ?. Does the touchscreen calibration example work ? If not find you must one that does. Be sure you have Ts touchpoint lines included TS_MIN MAX as well (set from your calibration) it sets up p object value and screen size parameters. Bool also needs to be set false true false usually it's assigned to ifpressed. Throw read resistive code everything serial monitor down into loop. Run it pull up serial monitor and write down the x y values where you are touching. Then finally check your if (t.x < && line numbers I often put in the opposite values then realize when it doesn't work that my numbers are backwards.

  • @TheElectronicDilettante
    @TheElectronicDilettante ปีที่แล้ว

    Is it possible to add a diode, or some other device to isolate the pins) to pins 1 & 0 of the display pin out and still use 1&0 for serial communication??

  • @faridrifai2166
    @faridrifai2166 ปีที่แล้ว

    God bless you sir

  • @saydiy1528
    @saydiy1528 8 หลายเดือนก่อน

    good job. can you show a round image in a round area instead of a rectangle area? thanks.

  • @Vetle1
    @Vetle1 2 ปีที่แล้ว

    Great channel!

  • @nadenglish3811
    @nadenglish3811 11 วันที่ผ่านมา

    Thank you so much, I am using it with Arduino mega and everything is mirrored, touch, words and everything
    what do I do?

  • @user-zy1dl1rt6t
    @user-zy1dl1rt6t 5 หลายเดือนก่อน +1

    good ,keep going

  • @thanassissarakatsianou2290
    @thanassissarakatsianou2290 4 ปีที่แล้ว +2

    First of all, I thank you for your excellent and detailed videos you offer to the public! I was wondering (because I'm in the middle of a project) if it's possible to have an ethernet shield and a touch LCD screen (like the one you 're presenting in this video) connected together on an Arduino Mega?

  • @essamaframhanna
    @essamaframhanna 3 ปีที่แล้ว +1

    Thanks for this Excellent video, I wonder to know how can I use the same 3.5" LCD and OV7670 Camera connect to Arduino UNO, to get Live picture.. Of course I'll use Breadboard instead connecting the LCD directly to Arduino, Neglecting touchscreen pins..

  • @arduino5267
    @arduino5267 3 ปีที่แล้ว +1

    Thank you sir

  • @petercolls3385
    @petercolls3385 3 ปีที่แล้ว

    Very good video - Excellent presentation - Question where can you buy the screens shown on the LDC Wiki site - Thanks

    • @cicizhao2118
      @cicizhao2118 3 ปีที่แล้ว

      hello Peter, do u have the needs for the LCD Screens?

  • @Sparky5
    @Sparky5 2 ปีที่แล้ว

    I use the 4D systems touch screens with free Workshop 4 IDE software. Great for a non-programmer like myself.

  • @THE16THPHANTOM
    @THE16THPHANTOM 3 ปีที่แล้ว

    can you use shift registers to increase the nano pins? would that make the libraries completely useless and require some rewriting to compensate? i have no time to go hardcore mode and write the software myself.

  • @michaelhawthorne8696
    @michaelhawthorne8696 4 ปีที่แล้ว +1

    Brilliant video !.....I have one of these displays but only have an UNO... I might invest in a Mega.
    I have a 7" touch screen from Kuman, I might dig that out too.
    That LCDwiki is a fantastic site.
    Thanks for uploading.

  • @samiboulaid
    @samiboulaid 3 ปีที่แล้ว

    you are the top of the tops

  • @ygt602
    @ygt602 3 ปีที่แล้ว

    Do you do tft with the distance sensor?

  • @LaxmanSingh-wh9vy
    @LaxmanSingh-wh9vy 2 ปีที่แล้ว

    21 july.2021- very good sir -Laxman Singh

  • @allouette401
    @allouette401 4 ปีที่แล้ว

    Very happy that you are back .

  • @Abc-sl1nf
    @Abc-sl1nf 10 หลายเดือนก่อน

    Can you get current time from the Internet to display on that?

  • @belleluze
    @belleluze 4 ปีที่แล้ว

    Wonderfully executed sir.
    As an idea you should make a tutorial/video on making a Geiger meter, like making the high voltage and taking reading of an lcd.
    Thank you for your time.

  • @BikingWithSlothy
    @BikingWithSlothy 3 ปีที่แล้ว

    really nice vid

  • @qzorn4440
    @qzorn4440 3 ปีที่แล้ว

    very, very nice video I am repairing a CNC 3-axis milling machine, Siemens Windows_NT Acramatic 2100 LCD display with a 5-wire 14" touchscreen. The touchscreen went bad, do you have any suggestions? I would like to just replace the stick-on touchscreen with the ribbon cable and connector with may be the glass window. thanks. :)

  • @PerchEagle
    @PerchEagle 4 ปีที่แล้ว +2

    Could you do a tutorial about the model that uses 2.8 tft SPI mode?

  • @danielbernhard1250
    @danielbernhard1250 4 ปีที่แล้ว

    Nice Video. How much overhead does it add to an existing sketch? I`m about to build a little project. I`ve got an interrupt pin used for calculating RPM out of a time (used 1 impuls per round on an gear-Motor between about 1 and 40 RPM). Then i use 4 digital pins for some buttons(wich i would exchange with the touchscreen). An other Pin is driving an PWN signal to the Gearmotor. 2 pins are used for relais for a heater and an cooling fan. An other pin drives a MOSFET to a little pump via AnalogWrite. An Steppermotor is driven (NEMA17) by using the millis() funktion to calculate the timing.
    I really like the idiea of having an touchscreen user interface. But if the stepper is running with about 20 RPM the cycles left for everything else, are decreasing a lot in order to have an accurate timing of the pulses.
    Next point is. I only have an Uno, Nano or an arduino Due.
    The due should be much more powerfull. But cause of the Cortex core, im worried about compatiblity issues with some libraries and the logical level of 3.3V.

  • @projyuaharoni
    @projyuaharoni 4 ปีที่แล้ว

    thank you for the video
    !
    I cant find the touch s pins. no mark for it.
    is it go with another pins?

  • @aberateklehaimanot9804
    @aberateklehaimanot9804 4 ปีที่แล้ว

    Great teacher,thanks again for sharing Sir.

  • @BlueClefto
    @BlueClefto 3 ปีที่แล้ว

    Gramps is the best!

  • @hassanwaqas3249
    @hassanwaqas3249 2 ปีที่แล้ว

    Is it possible to use a screen from an old tablet PC for this purpose?

  • @selfawareness369
    @selfawareness369 5 หลายเดือนก่อน

    Is the amazon bootleg versions of the Arduino Mega just as reliable as the arduino mega?

  • @nelsongomez8547
    @nelsongomez8547 6 หลายเดือนก่อน

    Hello friend congrats
    Friend, what kind of model Is his display touch screen? Do you have the link where Did you buy that one?

  • @yahyagtari766
    @yahyagtari766 4 ปีที่แล้ว +1

    Thanks for all this information, please I need information about mkr 1300

  • @joymakerRC
    @joymakerRC ปีที่แล้ว

    Thanks bro. love your face.

  • @andrew58344
    @andrew58344 3 ปีที่แล้ว +1

    Hi I was wondering if someone could give me some advice. I have a system that uses a manual mixer value to supply water at a constant temperature to my gas boiler. I want to add an arduino that is controlled by a water thermostat and in turn controls a electronic valve of some kind. Also I would like to have a touchscreen connected to be able to set the temperature

  • @user-by2bs4kp7b
    @user-by2bs4kp7b ปีที่แล้ว

    that intro music reminds me of the theme music of "The office"

  • @604smit
    @604smit 4 ปีที่แล้ว

    nice and interesting subject, thanks

  • @gazzacroy
    @gazzacroy 4 ปีที่แล้ว

    cool stuff nice video

  • @bigsteve6729
    @bigsteve6729 2 ปีที่แล้ว

    Any of these work with the wemos or any esp8266 boards

  • @oemanagement1936
    @oemanagement1936 2 ปีที่แล้ว

    hello can you please show us how we make 3.5 tft lcd shield arduino controller timer by creations button

  • @floridian080
    @floridian080 3 ปีที่แล้ว

    A problem I've encountered is using a 2.8" TFT shield and separate SPI SD board with Arduino Due. The Due header is not accessible when shield is attached. Do you have a solution to this problem. Can MOSI, MISO and SCK be reassigned? Thanks for any help you can offer.

  • @jaanbrosmusicofficial
    @jaanbrosmusicofficial 3 ปีที่แล้ว

    I'm trying to interact with an APP on my phone by indirectly touching the the screen. Modern touchscreens, as I'm sure everyone here knows are capacitive rather than resistive, so that means that I should be able to interact with it as long as I can bring a small current to the screen where I want to touch.
    I'm experimenting with using some speaker cable and a couple other wires I have laying around the house to see how far away I can be and still pass enough current through the wire to register a touch on the screen, based on my distance and the size and quality of the wire.
    What I'm finding though is that touching wire to the screen seems to register a touch even without me touching the wire. So is there already a current inside wire? Is it the type of wire I am using? I was under the impression that a wire on its own had no current and only passes electricity when there is an outside source.
    Is there anything I can do to decharge the wire, or block it somehow?

  • @thomasvideoa
    @thomasvideoa 4 ปีที่แล้ว +1

    Nice video! Could you make some tutorial videos about How to use Nextion LCD touch screen which is popular among diyers but has little references?

  • @walidel-sharoud8339
    @walidel-sharoud8339 4 ปีที่แล้ว +2

    Great video as usual!! 4D systems produce programmable touchscreens that are much easier to use. It will be great if you manage to cover them as well.

  • @williammiller7543
    @williammiller7543 4 ปีที่แล้ว +1

    I'v tried these screens in the past and really didn't understand them and have shied away from their use. I'm and Arduino IDE user and have moved to the ESP32 MCU for cost and capability reasons. Do these screens work on that MCU or is that out of scope for your tutorials? Great video and good to have you back.

  • @tjmb71844
    @tjmb71844 2 ปีที่แล้ว

    I want to control 16 servos using a MEGA, and a PCA9865. I want to select the servo to be controlled using on-off switches and I want two LEDS per servo to show position. I also want to use a TFT 2.8 Display (not sure for what yet). Can you help me with a hook-up diagram? Also do I need a TFT sheild with the MEGA to get the 3V?

  • @MrPeloseco
    @MrPeloseco ปีที่แล้ว

    there are some confusing declarations here...
    An array buttons length 3 is declared but later 9 buttons are initialized in the nested for loop.
    A multidimensional (3x5) array is declared for 3 labels, and then again, we inspect the ninth element of the first dimension of the array.
    And finally an array length 6 is declared for the colors of the buttons and inspected in the nested loop to the ninth element...
    it just hurts my eyes 😵
    But still, thank you for the introduction to tft's... always great videos 👌

  • @AHaensel
    @AHaensel 3 ปีที่แล้ว

    Is the surface glass or plastic?

  • @heroesandzeros7802
    @heroesandzeros7802 3 ปีที่แล้ว

    Can you use an ELO touchscreen with the arduino?

  • @alenninan5524
    @alenninan5524 3 ปีที่แล้ว

    Hi , i need to design a screen which could be used by stylus pen using arduino . Is it possible ?

  • @santiagotinta6737
    @santiagotinta6737 3 ปีที่แล้ว +4

    Can you do a menu interface tutorial with the 2.8" TFT Touch Shield for Arduino with Resistive Touch Screen, please

  • @Krejstrup
    @Krejstrup 3 ปีที่แล้ว

    Q: How do you make a panel with a screen like that? If I'd like to put that on a electronics box or a plane panel in the car or int my boat (no water!). Just a square hole would be quite ugly.
    Good vid, as usual.

  • @startobytes
    @startobytes 4 ปีที่แล้ว +1

    Hi could you make it with you about the nrf24l01 Module and how to Connect it with the Arduino Uno?!