Which Is The Best Type Of Standing Seam Metal Roof? Snaplock Vs Mechanically Seamed Vs Nail Strip
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- There are three different types of standing seam metal roofing panels. All of these different panel types have there own sets of pros and cons. By the end of the video you will know which types of metal roofing is best for you.
00:00 Types of metal roofing
00:40 Types of standing seam metal roofs
01:05 What is snap lock metal roofing?
01:56 What is mechanically seamed metal roofing?
03:04 What is nail strip metal roofing?
04:27 Which style of metal roofing is best?
If you already have not purchased your metal roofing give us a chance to bid your job. Save 15% to 50% with our manufacturer direct pricing and great customer service. Inexpensive delivery anywhere within the United States.
Visit Our WEBSITE
bit.ly/wsmr-website
Visit our LEARNING CENTER
bit.ly/learning-center-wsmr
Snap Lock Standing Seam Metal Roofing Panels
www.westernstatesmetalroofing...
Mechanically Seamed Roofing Panels
www.westernstatesmetalroofing...
Nail Strip Standing Seam Roofing
www.westernstatesmetalroofing...
Standing Seam Metal Roofing Installation Series
• Standing Seam Metal Ro...
Types Of Standing Seam Metal Roofing: Pros And Cons
When you are searching for the best standing seam roof panel? While the decision to use standing seam might be an easy one, which type of standing seam metal roofing to use may require a bit more consideration.
There are three different types of standing seam metal panels to choose from, along with different types of stiffening ribs or striations that can be included within them.
What Is A Standing Seam Metal Roof?
Standing seam metal roofing is sheet metal that has a flat appearance that has a flat appearance in the center and vertical ribs at the panel edges. It’s the most weather-tight metal roofing system because it’s attached with concealed fasteners.
What Are The Types Of Standing Seam Metal Roof Panels?
These are three types of standing seam roof systems:
Snap Lock
Mechanically Seamed
Nail Strip/ Nail Flange
Snap Lock Roofing With Clips
The snap lock standing seam roof system consists of panels with a male and female leg that snap together. These panels are fastened to the roof with clips, and the fasteners are concealed.
Snap lock standing seam is the most common type of standing seam roofing. Its popularity comes from being regarded as the best all-around standing seam solution when you consider the performance of the panel, cost, and easier installation than some of the other standing seam panels.
Mechanically Seamed Metal Roofing
Mechanically seamed panels are designed with clips that line up with one another to be locked together by a mechanical or hand seamer.
Mechanically Fastened Metal Roofing: Single Lock Vs. Double Lock
Mechanically seamed panels can either use a single lock system or a double lock system when they are seamed together.
A single lock refers to the seams of the panel being folded once (90 degrees) and a double lock is when the seams of the panel are folded twice (180 degrees).
Double lock systems are more commonly used. They are more secure and have an overall better performance over a single lock system.
Nail Strip Standing Seam Roofing
Nail strip, also known as nail flange or fastener flange, is the snap lock standing seam roof system with the simplest installation process. The male flange has one-inch slots that are spaced 6 inches apart and fastened directly to the roof deck, eliminating the need for clips. Once the panel is fastened, the female leg of the panel snaps over, hiding the fasteners.
Nail strip panels are used most often for residential standing seam roofing jobs because they’re the least expensive standing seam system. However, this panel has the worst performance of the three types of standing seam panels.
FOLLOW US ON SOCIAL MEDIA:
FACEBOOK: bit.ly/facebook-wsmr
INSTAGRAM: bit.ly/instagram-wsmr
TWITTER: bit.ly/twitter-wsmr
LINKEDIN: bit.ly/linkinin-wsmr
HOUZZ: bit.ly/houzz-wsmr
PINTEREST: bit.ly/pinterest-wsmr
TH-cam: bit.ly/youtube-wsmr
Visit Our WEBSITE
bit.ly/wsmr-website
Visit our LEARNING CENTER
bit.ly/learning-center-wsmr
![[MIRRORED] LISA - ROCKSTAR 🎸 MV version #LISA #BLACKPINK #ROCKSTAR](http://i.ytimg.com/vi/-U58DuCCtZk/mqdefault.jpg)
This video is incredible. 5.5 mins long, honest, frank, and gets right to the point. Doesn't cover oil-canning avoidance but that's a whole other bag of worms.
A video that gets right to the info, done quickly, and very informative! Thank you for not making this way too long as most do!
Thank you for the support and the best of luck with your project.
Thanks for the video
A HUGE HELP,, Thank You very much.
Glad we could help you. If I could ask for a favor, please click the "like" button as it helps a lot. Good luck with your project.
FEMA has found that snap lock metal roof panels are the worst performing panels in wind storms, this comes from their inspecting roofs after hurricanes. The problem with all standing seam roofs is when the first panel starts to peel away it takes out a row of panels with it, this is especially true of mechanical standing seam panels. Exposed fastener panels perform very well in wind storms, if a panel does come off it will be just one panel, it won't take out an entire row of panels like standing seam panels do.
nice idea
My wife and I put an exposed-fastener metal roofing on our house fifteen years ago. It was all we could afford. Big mistake. I'm now planning to tear it all off and install a nail-strip standing seam roofing product instead. Exposed fasteners loosen over the years and leak, which only gets worse and worse. Fine for outbuildings but not a home.
Good info
Awesome video I am just starting my roofing company I will be doing tin roofing thx u again
Roy, good luck with your new company. If you need any materials, we ship all over the country and have excellent pricing.
sales@westernstatesmetalroofing.com, 602-495-0048
Good luck
handy video
Fantastic
Illuminating!!!!!!!!
visited the website to found out western states metal roofing is available in south africa durban where am located and PBR is perfect and cheaper than i thought. thank you western state metal roofing
I guess Im quite off topic but does anyone know a good site to stream newly released tv shows online?
@Adrien Connor lately I have been using FlixZone. You can find it on google =)
@Beckham Emerson Yup, been using FlixZone for months myself :D
@Beckham Emerson Thank you, I signed up and it seems to work :) I appreciate it !
@Adrien Connor happy to help :)
Great video. Spelling error on last slide. .... Sinlge with Mastic Tape
How long does it take for the head of the fastener to wear a hole in the panel or for the nail strip panels to rip themselves apart due to over tightening the fasteners.
The screws don't typically wear a hole in the panel but can leave a visible dent in it.
Overtightening does not really happen, because as long as the screw is not going through the nailstrip, it will still allow the panel to expand unlike they told in this video.
La misma máquina hace los tres tipos de paneles ?
2 questions
During the rainy times, does it make the ticking sounds (like on a tin roof)?
What about eventual corrosion and how soon does it happen?
When it rains you will hear a bit of a ticking sound, but it's not that noticeable. I have a metal roof personally and it's never been loud enough that it annoys me. The underlayment that is beneath the roof softens the sound a bit. All things will eventually corrode and if you live near the ocean than you should not use metal (use aluminum or copper in that instance). In a normal environment the roof is designed to last 40+ years. It is steel that's been coated with a galvalume coating. In addition, it has a high quality PVDF paint finish. The warranty on the paint finish is 30-40 years depending on the paint supplier and the color that's chosen.
The standing seam metal roof on our 1866 built house needs to be replaced but the metal roof fits right into the wooden gutters. I assume because of when it was built they used the mechanical seam roof so do we need to use that type or can the other types of metal roofing fit in the same way so we can keep our wooden gutters?
Karen, It's impossible to answer that question. You will need to ask the roofing contractor when they come out and do a bid on your roof.
You can use different types of roofing to fit with the wooden cutters, but you shouldn't ruin an old classy house with anything else. Just use mechanically seamed roof, that is the only way to go.
Just found your video. Well done! What software did you use to animate the steel roofing?
Thank you. We used a combination of After Effects with Blender.
Strangely, the animators think screws turn counter-clockwise when fastening! You sure can tell when someone's never lifted anything heavier than a keyboard and mouse -
@@WesternStatesMetalRoofing A note to your After Effects artists - "lengths" is not possessive [at 04:15]. You may want to remove the apostrophe. Also, "single" is not spelled "sinlge" [at 04:30]. Please don't think I'm trying to be a jerk, as this is meant to be constructive criticism; precision is as important in language as it is in technical specs. Finally, for some inexplicable reason, your Blender artist has the screws turning counter-clockwise when they fasten.
Beyond this, you have created an excellent video. I have learned much, have bookmarked the video, and will be referring to it again when the time comes to start selecting and ordering materials. Thank you -
@@atlanteum Really appreciate the feedback. I'm a one-man band. Producer, videographer, editor, 3D (basic knowledge). Will take note and have videos reviewed prior to posting. Thank you for your support of the channel.
@@WesternStatesMetalRoofing Thank you for your support of us DIY-ers! You made a wonderful video, and I truly meant the comments to be constructive. Also, I'd be happy to share any 3D/ AE tips, help or suggestions with you any time, friend. Cheers -
Seems like I don't want the nail in type (due to the metal being ripped by the nails), nor the mechanically seamed (due to installation time & skill required) but the Snap lock with clips goes on easier and lasts longer than the nail in type. Got it! But the orange and black dots confused me. What do they mean?
I can see how those dots can be confusing. 1 dot is the least and three dots is the most. Basically nail strip is least expensive & mechanical seam is most expensive + snap lock is in the middle.
FEMA has found that snap lock panels are the worst performing panels in a wind storm, this comes after FEMA has inspected metal roofs after hurricanes. The wind pressures will cause the snap lock panels to disengage with each other.
are these panels recomended for concrete roofs? how should they be fastened to a concrete roof?
Luis, In a residential application these panels are normally attached to a solid wood substrate with synthetic roofing underlayment between the standing seam panel and the solid wood substrate. There are instances in which these panels can span from metal purlin to metal purlin, but you normally would not see that on a residential house and it would require an engineer to determine the panel chosen and the distance between purlins.
It's not appropriate to install standing seam on concrete and I would have no idea how to fasten it correctly.
@@WesternStatesMetalRoofing I would not suggest installing any type of metal roofing straight on top of concrete, atleast install a thick underlayment or plywood underneath
I really like it.
how can l order them?
Sovanora, We can supply standing seam panels for you as long as you are located within the USA or Canada. Please call my office and ask for the sales department at (877) 787-5467 or visit website and request a quote at www.westernstatesmetalroofing.com/request-a-quote-metal-roofing-metal-wall-panels-in-standard-colors
I live in a high wind area, will this work for me?
High wind areas should stay away from snap lock panels, the wind pressure can cause the panels to disengage and blow off. Either go with mechanical standing seam or exposed fastener. Todays exposed fasteners are superior to exposed fasteners from 10 and more years ago. You can now get fasteners with a cap head that shields the EPDM washer, EPDM is a long lasting material.
Why fake it…..do the traditional double turned standing seam in a metal that can be soldered.
She Said 3 One
Minute 3:56 Is The WORSE
To Install But No,
The Worse In This Video Is
The Best, Why ???
Because 99% Of People Install
The 3 One Only 1 From 100 People
Install The Other Ones.
Remember This Video Is A LIE.
Amén.