I cannot believe how simple and detailed are your videos, 10 years later and still valid, what everyone on the web fails to mention is, when changing out your rear tire, this should be a mandatory check since you loosened the belt and all the bolts, I felt something was missing and I came here looking for your videos, thank you and keep it up. You might not reply but for anyone reading this, subscribe and listen to his teachings, you’ll be more knowledgeable at the end.
Exactly what I needed to hear my friend!! I didn't quite understand the inner workings of the adjuster and how it actually pulls the axle or pushes the axle!! Now I've got it!! My problem actually was I took my bike to a local shop for a new belt, my pop picked the bike up for me and got two blocks away and the wheel fell off!! The shop got me some new parts and fixed it, but the past week the belt has been squeaking. I check the tension and it is tighter than all get out!! I couldn't move the
Hi mate, I will be doing some maintenance on Penny's new Harley shortly! ... It's great that you do your own work, they are a simple bike and not too complex to get to grips with ... I appreciate you watching and taking the time to comment, it's great to have such kind support... take care, Cheers Del & Penny
I don't know if you're a licensed mechanic or not but your breakdown is genius. No special tools, no unnecessary fuss & to the point. Love the nail varnish trick! Thanks for making the video!
great vid as always mate.....totally agree with helping new owners with their rides with vital maintenance like this. no doubt there are quite a few peeps out there who know their belts / chains are well overdue for adjusting and just aint got the monetary means to take it to a dealer etc or the know-how and just `trust to luck` the bloody thing stays on !!! highly dangerous, if not lethal of course. vids like this play a big part i reckon in keeping many, many peeps safe and happy. cheers Ade
Thanks. This as very helpful. I just had to loosen my rear wheel for wiring under the fender. Now my Sportster "tracks" to he right.......So thanks to you, I can go back and get my belt tension and rear wheel alignment correct. Thank you.
Just caught your video here. You're spot on with the way mechanics or owner manuals explain things. Like they're a genius using sophisticated words. Really like the way you explain things, like you said, explaining it like you're talking to someone who has never done the job before. You've helped me out more than once with the videos. Appreciate all you and your miss's are doing. Have a great day and keep the shiny side up.
Thank you John, that's very encouraging to hear that, naturally, any audience is varied from absolute beginners to qualified professionals and it's always a worry that you could, maybe, patronise people by over explaining the obvious... but, of course, to the absolute beginner, nothing is obvious! And we've always pitched our videos at those who can use them the most to their benefit, so we appreciate the appreciation, if that makes sense!
Excellent! Every video you do is complete, concise and very easy to follow. You never 'assume' anything which is what sets you apart from everyone else. Thank you and hope you are recovering well.
Thank you for your kind feedback Gerald, it's a pleasure to help and good to know that what we do finds an audience. Making progress with the recovery, a day at a time.
Just bought my first bike - a 2008 sportster roadster, and have been searching how-to articles. Your videos always end up being the ones that are the most informative and complete. Thanks for the help!
Hi buddy, glad it helps you, that is why we post them, not only is it good to save money, but it enriches the pride of ownership in your bike to have taken care of it's needs and looked after it mechanically yourself...good luck and ride safe, my friend, Del
Thanks mate, it was a response to a direct request, it shows that riders need to know these things, they can save you money, and possible problems with neglect... thanks for watching.. Del.
thank you Delboy,I'm a Boozefighter and ride alot and my belt was really loose(like over an inch) you made this a really easy process bro.. Thanx again
Hey Dan, great to hear from you brother... am glad the information could help, it ain't hard is it , a simple enough proecdure, and it's good to wrench on your own ride right?... and also, thanks for making contact, it's cool to hear from someone from the oldest MC in the world... respect my friend, take care, Del
Moonfleet41 I love working on my own bike.. I'm highly mechanical,already did a Barnett clutch,I was just curious about keeping the wheel true and your way was fool proof.. my wheel was actually 18 3/8" on one side and 18 1/4" on the other before I fixed my belt,now it's truly true.. wish you were here in the States.. I'm a Boozefighter with the BoozeFighter MC.. would be kool to ride together
I have seen about a dozen videos on how to adjust the belt and every time, I have a question about one thing or another. Finally, I found yours! Very well done!!! You explained it exactly the way a novice such as myself needed. Thank you so much!
Phew... very comprehensive. For those in a hurry just to see how much deflection is correct without correct tool, jump to 3 minutes to 3 minutes 20 seconds. Thanks for that.
I love your videos. As a novice in harley mechanics, (Thats giving me ALOT of credit), i love that you explain the “Why” behind everything. Youre an amazing teacher. Thank you for taking the time to put these out. God bless!
Thank you Cameron, thats very kind of you, im glad you enjoy the videos and can learn a thing or two now and again... ride safe buddy, and keep in touch.. Del.
Hi Gurn, i cant believe the shop left the bike in an unsafe condition... unbeleiveably dangerous and im glad your pop was not hurt, it is important not to make it too tight, and they can squeek a bit when they are new, if you keep an eye on it to make sure the tension remains in scope then you should be fine... im glad it helped you mate, and thanks for posing the question.. these things often help many other people at the same time.... ride safe buddy... Del.
No atall, its a valid question, the swing arm moves in an arc, and that arc is often at its tightest point when down on its wheels...but as long as you check the belt deflection on the jiffy stand then again on the lift, and it is the same...then you have proved there is no difference so it doesnt matter... the reason i suggest to make the alighnment setting with the bike upright is that the weight is central, the main issue is to check it once it all done back up to be sure, thanks again, Del.
thanks for the knowledge most dealers here in the States won't give you any information you either have to pay them or figure it out yourself your videos are most helpful thanks
Hey Curtis, i guess its not in their interest to hand you the knowledge they prefer to charge you for.... but ive always thought this to be reverse thinking...if any dealer or garage would support you as a customer, help you out and make life as easy as they can for you... then you are way more likely to go back for your next bike aye..!!!!??
I untwist and stretch out a metal coat hanger. After I’ve reached the proper belt tension I bend the ends of the wire coat hanger into ninety degree bends with tips to touch center of front swing arm pin and center of axle. Then I use my coat hanger alignment guide to adjust axle distance from swing arm pin on the opposite side. I keep my alignment tool in the garage and check the center to center distances often to make sure nothing has changed.
That is exactly why we post them, my friend, I'm glad you enjoy them and hope we can keep saving you a few beans as time goes on ... thanks for taking the time to comment, Cheers Del
Glad the video helped you... there's plenty on our Channel to keep you going! There's 350+ on the channel, so I'm sure you'll find more when you need it! Thanks for watching and taking the time to comment, Cheers Del
I use a different method for rear wheel alignment. With my XL1200C on its side stand, I get my eye about 8" from the floor in front of the bike and turn the front wheel perfectly straight by sighting down the front tire sidewall edge on each side with the sides of the rear tire. Then I walk to the rear and with my eye 8" from the floor, sight down the rear tire sidewall edges to line up with the front tire. It is ultra precise, easily repeatable, takes into account frame or swing arm imperfections, and doesn't require a ruler or measuring tape. It works especially well on my XL1200C because the front tire is nearly as wide as the rear. But it also works great on my sport bike with fat rear tire if I put the bike on a rear stand to make the bike vertical and use 2x4 blocks along the narrower front tire. Sighting from the rear, I line up the rear tire edges with the front blocks. What do you think?
Thanks, just started doing all my own maintenance in my Sporty. I have a friend who has a chain driven Road king told me that I needed to adjust my belt. Your video was quite informative. Just check my belt tension and it only move a half inch or less. So it's good. Thanks for the vid. Added it to my fav.'s
Learned so much from you about servicing and taking care of bikes, love your style of teaching and putting things a cross. Love your passion while you doing it too. Oh, and hi Penny, behind any great man there is a great woman.
Really nice work, enjoying these instructional videos! One other check I like to make is to sit behind the rear wheel, and rotate the tire/wheel assembly while watching the rear pulley. The belt should track in the middle of the pulley and not drift to either side making contact with the edge of the pulley. It's just a check to make sure you have true parallel alignment.
Oh man always there for us, genius. I was looking to buy a belt adjuster, or atleast that is what Harley calls it. But wondered if I really required it and thats when I thought of you ( as always), and decided to see if you had video on this. I have 2007 Iron 883, love it death. I am actually taking this project a step beyond. I need to change the rear tire. Will be using the the zip tie method to get the tire off and a new one on. If I fail on my try, its off to a local garage to get tire off the rim and the new one on ( The professional way), but hoping it does not come to that. So here is where I have many questions, I have the manual and it has confused me slightly. 1. getting the wheel off no problem 2. Getting the tire off and new one on ( Zip tie method, do google it), hopefully it works 3. Getting the wheel back on. Now thats where I am a little nervous - 1. As soon I take wheel off, I have taken the alignment out completely, 2. The tention on the belt is definitely gone as well. So now I am at the point where I have been able to put the wheel on the axel ( nothing is tightened yet) and back on the bike, that axel has room to move ( this is where the lug nut goes), it can move half an inch back and forth, does it not? so to tighten the belt to the acceptable tightness, where do I start with the wheel? Should I keep it in the center , tighten it slightly and check the belt and get it to the point where it is more or less right ( in terms of belt tightness), and then use the tiny screw to adjust the alignment and fine tune it? or should be doing something different. 3. how much can the tiny screw be moved, its not indefinite obviously. 4. Can you also confirm tightening the tiny screw ( aka turning it clockwise, so moving the screw in), moves the wheel back or forward? I am assuming based on mechanics that it makes the wheel roll a bit from left to right ( out of alignment) and the same screw on the other side (exhaust side) , clockwise bring it back in. In essence would this not loosen the belt again as i am pushing the wheel forward. I really hope this is making sense, as it all makes sense in my head. Either way I am reaching out to a man best suited for this advice . On behalf of everyone thank you for all that you do.
I love your opening on this. I don't have a mechanical background, so things that seem very simple to people educated in such matters are complicated and scary for me. Thanks for the videos.
+ExarPalantas Thanks mate, you're very kind, most things on bikes are pretty simple, its just a case of learning how its put together... ride safe and enjoy your bike buddy.. Del.
Hey buddy...yeah if the ground wire is touching and being rubbed, then i would move it...but Penny's one is close too, and it doesn't touch...if you look close for any rubbing marks and its untouched...then you can leave it alone.. only more it if its being rubbed... thanks for your kind support mate, and enjoy the Iron... cheers, Del.
Man! Excellent video! I have adjusted my belt twice in the past year and never checked to make sure it was parallel. I will be checking it today as I adjust me belt today. :)
Del the size spanner i use on rear spindle is 1-1/4 or 32mm not as u said 1 1/2 not haveing a go m8 ur vids are very good ive been working on bikes a long time i cant explain as clearly as yourself allso no need to drop the swinging are out when changeing a belt or endless chain remove bottom bolt on drive side shock G
I usually never comment on the videos.. But I couldn't hold myself back from commenting on these amazing tutorial videos you putup.. Great job done explaining it so well.. Thank you again Mate!!.. Please work upon few more basic tutorials that we could do at home and save few bucks giving mah harley for service.. I own a fat bob just fyi..
Right on, it's nice to find someone on here who can explain stuff about my sportster, only cause I want to learn about it and save some bucks by doing it myself
Nicely done Moonfleet, As someone with a bit of machanical know how, Your explaination of this process should be easily understood by someone without said knowledge. I can work on cars, bikes are a new thing to me. Thanks for taking the time to do these vids. Give a shout out to your camera man/woman. Nice job.
Ade, you are so right, i take a look around at the biker meet places i go to, and time and again ill see a bike with consumables that are way out of thier use limit, and the owners story is the same every time.."i have to wait till i get paid so i can book it in with the dealer. the dealer isnt the bad guy, just to them, he is 'the ONLY guy'.. if all of those of us who DO know 'how-to' spread the knowledge and helped other bikers, the feeling of family would return to biking.. thanks buddy, Del.
Thanks so much for all the input. When I looked into how to check belt tension according to Harley I would have needed a tool just to check it. Well thanks to you know I know.. Thanks again!! :)
Yeah, everything is easy if you know how.... it's important to pass on the things we know to anyone who can use it...thats what the brotherhood of biking is all about, and has been a bit forgotten in the modern 'plug and play' bike market.... thanks for your comments... take care.. Del.
Love all the helpful tips. I have used your advice to put 13" ape hangers on my 03 sportster couldn't have managed to do it with out your helpful videos thanks and keep it up.
Hi Richard, thank you for your kind words, what you've experienced is exactly what I saw when me & Penny decided to make videos, so many explanations of things leave out vital steps and also worst of all, they tend to presume the viewer has a lot more knowledge than they might, so use in-speak and brevity, when the absolute novice needs it properly explained in lay man's terms and also a little insight into 'why' things are done in order to help with proper understanding of the task..good luck
Well dpne Otto and thanks for your very kind comments... i just like to help other riders realise that most jobs on a bike are truly not that hard...and 13" apes on a Sporty...very kewl.. lets have a short walk round video then....?.. take care. Del.
Nice video. Motion Pro makes a really neat and inexpensive tool for checking rear wheel alignment. If you do your own maintenance on your Sportster, I highly recommend it. Also, Harley makes a nice tool to show how much force you are putting on the belt when measuring the deflection. I highly recommend that as well.
Hi Gerald, you are dead right, there are a few tools on the market for checking wheel alignment, but one of the simplest methods, that i didn't mention in this video was to just check the belt tacking in the back pulley, if there is an even gap each side of the belt and the pulley walls, then you're bang on... and thats tool?, Harley call it a "Deflecometer"...lol
yes....has to be the BEST mechanic in the UK hands down!!!would pay him a mil to come to the US and give my Harley Fatboy a overhaul!!!!!!!!!!!!!!!!!!The knowledge and know how is insane. Its amazing how a human being can be so damn smart/ on the mark!!! I only envy his skills!!
A Shovel...im proper jealous mate, i would love a nice straight, unmolested early 70's 1200 to make my own....good luck with it, and enjoy every moment...life is for the fun bits aye... thanks and take care, Del.
Hi mate, if you have the proper HD service manual form the dealer it covers it in great detail.....but others may not.. the caliper can stay put, but it makes it easier if you unbolt it and slide it forward...its hard to explain every step here and i dont have a video made of it so far. sorry not to be more help mate... good luck with it.
The only stupid question mate, is the one you don't ask...!!! yes you can adjust belt tension with the bike on the stand...in fact, its irrelevant to do it with the wheel off the deck..(i left it up there while i made the video for ease of demonstration)...the bike will ride with the weight on the wheels, so all adjustments are best made with the weight on the wheels...take care and ride safe.. good luck Del.
Awesome video, I am contemplating changing my neutral switch on my own which requires removing the belt so was checking out your video! Awesome thanks! I don't think I have commented before but your other video have helped me as well!
OK, there must be a reason why its hitting the belt, it isn't designed to do that, see if you can remove the lead from its mounting, clean it up and re-route it a little so its out of the way, its hard to be exact without seeing your bike, but its just a game or trial and error, and doing what you need to do to make a small gap between them..
Really good vid (though I ain't got a Harley and don't want one), and found the wheel alignment idea great. I'll use it. Was rather disturbed to see what appeared to be a Guzzi 1100 Sport behind you, one of the most beautiful bikes ever made (got one of those), and somebody has plainly vandalized it. If you can find out who it was, I'll get them for you. Thanks for the tips. Steve.
Hi mate,I am planning a video on this subject quite soon,but the basic message is to go to a decent tool company like Machine Mart etc.,and buy a good quality basic 'general' kit,it will give you the essentials like screwdrivers, grips, pliers, couple of hammers, basic socket set, etc., then you could add to that some A/F spanners & allen keys, a set of torx bits, which would work on your imperial fasteners & always a spacious toolbox to add future tools...pay for quality & you won't regret it!
Hi mate...as with all the requests we get, we would need a Sportster with a belt that needed changing...we just load up what we have course to do here in the garage..maybe some day if Discovery step up our involvement and actually pay us for the contributions we make to them...we could make videos on wider subjects...but for now mate, the best thing i could suggest is get the proper genuine HD service manual, its a simple enough task and the manual covers every step...sorry cant be more help Del
Depending on the bike it should last at least 30k miles, but with meticulous care and retaining the belt guards properly it could last as long as 40-50k miles! All belts over high mileage will pick up nicks & cuts in the teeth & if they are bad, then yes, replace the belt, but generally you won't get that! Good luck with it, Del
Thanks Scott, glad we can help you buddy.. thanks for watching... not sure where in Canada you are, but for some i guess its time to park the bikes up and baton down about now?..
I have a 2008 sportster custom 1200 , my belt is riding on the rear pulley to the right side , witch side should I adjust it , in or out . To make it ride in the center ?
Absolutely. I am about to change the belt of my Sportster and I am really concerned about having everything aligned as it should be, after the replacement !
Unless the bike has particularly high rear suspension then NO, imagine the swing arm moves through an arc, its tightest when the front pulley and back pulley are level with each other and the ground, as the bike then moves either up or down it loosens off a tiny bit, the presumption is that it is above parallel when unladen, and moves down to parallel when you sit on it..this is not the case if the bike has low shocks, the belt can take a bit of extra tension, its being loose that does damage.
Del allso if the wheel on ground the risk is breaking the adjuster i think its best to have rear wheel of ground wile adjusting but on ground for mes play in belt ive seen a bust ajuster when one of my customers tryed to adjust. With wheel on ground G
Thanks for sharing your expertise on the sporty vids, they have been very helpful in doing my own maintenance service. I just bought a license plate bracket that attaches to the axle and my question after seeing this video is when I take off the axle nut in order to place in the license plate bracket, will I have to set the belt tension when I am done? By taking off the axle nut, will that automatically unset my belt tension even if I put the bike on a bike stand? How would I know if I have unset the belt tension when I remove the axle nut? I saw this one vid (Axle Mount License Plate Relocator Bracket) that shows an example of how easy it is to install a bracket on the axle and she does not set the belt tension. I didn't get my bracket from them I just thought I'd share what I saw on how to install a bracket. But, I trust your info and recommendations way more than all other vids on bikes that you have covered.
Hi buddy, don't sweat it on the belt tension as loosening the axle nut, and even removing it, will NOT release the tension... the two nuts on the very back ends of the swing arm which wind the threads in and out are what adjust the tension... as long as you don't move those then both the tension and wheel alignment will remain static! But it pays to check the tension whilst you have the nut loose just in case the belt has worn a little... hope that helps, good luck with it my friend, Del
Might seem like a dumb question - but I noticed you have the bike on a bike hoist. Can you do this adjustment on the side stand? If memory serves me right, the Harley factory service manual mentions that for inspecting belt tension, the bike needs to be on the 'jiffy stand'. It makes no mention under the 'adjustment' section, however. Harleys are a new thing to me...been tinkering on German and Japanese bikes for quite some time. I just want to make sure I don't muck anything up. Thanks!
I cannot believe how simple and detailed are your videos, 10 years later and still valid, what everyone on the web fails to mention is, when changing out your rear tire, this should be a mandatory check since you loosened the belt and all the bolts, I felt something was missing and I came here looking for your videos, thank you and keep it up. You might not reply but for anyone reading this, subscribe and listen to his teachings, you’ll be more knowledgeable at the end.
Exactly what I needed to hear my friend!! I didn't quite understand the inner workings of the adjuster and how it actually pulls the axle or pushes the axle!! Now I've got it!! My problem actually was I took my bike to a local shop for a new belt, my pop picked the bike up for me and got two blocks away and the wheel fell off!! The shop got me some new parts and fixed it, but the past week the belt has been squeaking. I check the tension and it is tighter than all get out!! I couldn't move the
Thanks for your very kind comments, its great to have such loyal support... ride safe, Del.
I've had my 883 custom for just over a year now and your videos are always my go to if I need information. Bless you both. Ride safe.
Thank you Stuart, glad we can help, stay in touch, and drop us a line whenever you need to ! All the best, D&Px
Hi mate, I will be doing some maintenance on Penny's new Harley shortly! ... It's great that you do your own work, they are a simple bike and not too complex to get to grips with ... I appreciate you watching and taking the time to comment, it's great to have such kind support... take care, Cheers Del & Penny
I don't know if you're a licensed mechanic or not but your breakdown is genius. No special tools, no unnecessary fuss & to the point. Love the nail varnish trick! Thanks for making the video!
great vid as always mate.....totally agree with helping new owners with their rides with vital maintenance like this. no doubt there are quite a few peeps out there who know their belts / chains are well overdue for adjusting and just aint got the monetary means to take it to a dealer etc or the know-how and just `trust to luck` the bloody thing stays on !!! highly dangerous, if not lethal of course. vids like this play a big part i reckon in keeping many, many peeps safe and happy. cheers Ade
I just found your videos and I really like your common sense approach to repair. very well done.thanks
+David Rosell Thanks mate, much appreciated !
instaBlaster
Thanks. This as very helpful. I just had to loosen my rear wheel for wiring under the fender. Now my Sportster "tracks" to he right.......So thanks to you, I can go back and get my belt tension and rear wheel alignment correct. Thank you.
Just caught your video here. You're spot on with the way mechanics or owner manuals explain things. Like they're a genius using sophisticated words. Really like the way you explain things, like you said, explaining it like you're talking to someone who has never done the job before. You've helped me out more than once with the videos. Appreciate all you and your miss's are doing. Have a great day and keep the shiny side up.
Thank you John, that's very encouraging to hear that, naturally, any audience is varied from absolute beginners to qualified professionals and it's always a worry that you could, maybe, patronise people by over explaining the obvious... but, of course, to the absolute beginner, nothing is obvious! And we've always pitched our videos at those who can use them the most to their benefit, so we appreciate the appreciation, if that makes sense!
Excellent! Every video you do is complete, concise and very easy to follow. You never 'assume' anything which is what sets you apart from everyone else. Thank you and hope you are recovering well.
Thank you for your kind feedback Gerald, it's a pleasure to help and good to know that what we do finds an audience. Making progress with the recovery, a day at a time.
Just bought my first bike - a 2008 sportster roadster, and have been searching how-to articles. Your videos always end up being the ones that are the most informative and complete. Thanks for the help!
You're most welcome buddy....drop us a line any time if you need a hand... happy to advise..... where are you in the world mate..?
I'm in Kansas City, Kansas, USA. I appreciate the offer and might just take you up on it sometime!
Starting on a belt adjustment now, thanks to your video.
bigzzzt
You're most welcome sir....im glad we can help... always here.. any time. Del.
Hi buddy, glad it helps you, that is why we post them, not only is it good to save money, but it enriches the pride of ownership in your bike to have taken care of it's needs and looked after it mechanically yourself...good luck and ride safe, my friend, Del
I have to echo what Bobab said two years ago: Excellent tutorial! I'm doing that very job today and now it'll be a piece of cake! Thanks, Delboy!
Thanks Bob, am glad it could help you, it's wonderful he videos still have use after all these years! Good luck with yours...
Thanks mate, it was a response to a direct request, it shows that riders need to know these things, they can save you money, and possible problems with neglect... thanks for watching.. Del.
thank you Delboy,I'm a Boozefighter and ride alot and my belt was really loose(like over an inch) you made this a really easy process bro.. Thanx again
Hey Dan, great to hear from you brother... am glad the information could help, it ain't hard is it , a simple enough proecdure, and it's good to wrench on your own ride right?... and also, thanks for making contact, it's cool to hear from someone from the oldest MC in the world... respect my friend, take care, Del
Moonfleet41 I love working on my own bike.. I'm highly mechanical,already did a Barnett clutch,I was just curious about keeping the wheel true and your way was fool proof.. my wheel was actually 18 3/8" on one side and 18 1/4" on the other before I fixed my belt,now it's truly true.. wish you were here in the States.. I'm a Boozefighter with the BoozeFighter MC.. would be kool to ride together
Sure would buddy... never say never, we're long overdue a vacation!
I have seen about a dozen videos on how to adjust the belt and every time, I have a question about one thing or another. Finally, I found yours! Very well done!!! You explained it exactly the way a novice such as myself needed. Thank you so much!
Phew... very comprehensive.
For those in a hurry just to see how much deflection is correct without correct tool, jump to 3 minutes to 3 minutes 20 seconds.
Thanks for that.
The best maintenance instrucional video I have ever seen here. No questions left in my mind after watching. Many thanks!!
Thanks Adam, im glad it could help you out buddy..
I love your videos. As a novice in harley mechanics, (Thats giving me ALOT of credit), i love that you explain the “Why” behind everything. Youre an amazing teacher. Thank you for taking the time to put these out. God bless!
Thank you Cameron, thats very kind of you, im glad you enjoy the videos and can learn a thing or two now and again... ride safe buddy, and keep in touch.. Del.
Hi Gurn, i cant believe the shop left the bike in an unsafe condition... unbeleiveably dangerous and im glad your pop was not hurt, it is important not to make it too tight, and they can squeek a bit when they are new, if you keep an eye on it to make sure the tension remains in scope then you should be fine... im glad it helped you mate, and thanks for posing the question.. these things often help many other people at the same time.... ride safe buddy... Del.
Del, u are the best u are on point, its not the first time i have asked u a question, u answer in a fast manner. A plus to u brother take care.
I love how you have such great attention for detail. If you’re ever in Iowa City, I’ll show you around.
Deal!
No atall, its a valid question, the swing arm moves in an arc, and that arc is often at its tightest point when down on its wheels...but as long as you check the belt deflection on the jiffy stand then again on the lift, and it is the same...then you have proved there is no difference so it doesnt matter... the reason i suggest to make the alighnment setting with the bike upright is that the weight is central, the main issue is to check it once it all done back up to be sure, thanks again, Del.
thanks for the knowledge most dealers here in the States won't give you any information you either have to pay them or figure it out yourself your videos are most helpful
thanks
Hey Curtis, i guess its not in their interest to hand you the knowledge they prefer to charge you for.... but ive always thought this to be reverse thinking...if any dealer or garage would support you as a customer, help you out and make life as easy as they can for you... then you are way more likely to go back for your next bike aye..!!!!??
I untwist and stretch out a metal coat hanger. After I’ve reached the proper belt tension I bend the ends of the wire coat hanger into ninety degree bends with tips to touch center of front swing arm pin and center of axle. Then I use my coat hanger alignment guide to adjust axle distance from swing arm pin on the opposite side. I keep my alignment tool in the garage and check the center to center distances often to make sure nothing has changed.
That is exactly why we post them, my friend, I'm glad you enjoy them and hope we can keep saving you a few beans as time goes on ... thanks for taking the time to comment, Cheers Del
Moonfleet41 does it need to be jacked up first
Glad the video helped you... there's plenty on our Channel to keep you going! There's 350+ on the channel, so I'm sure you'll find more when you need it! Thanks for watching and taking the time to comment, Cheers Del
Hi Justin...Camera Girl is my Penny Pitstop...and she makes the channel what it is....cheers mate. Del.
I use a different method for rear wheel alignment. With my XL1200C on its side stand, I get my eye about 8" from the floor in front of the bike and turn the front wheel perfectly straight by sighting down the front tire sidewall edge on each side with the sides of the rear tire. Then I walk to the rear and with my eye 8" from the floor, sight down the rear tire sidewall edges to line up with the front tire. It is ultra precise, easily repeatable, takes into account frame or swing arm imperfections, and doesn't require a ruler or measuring tape. It works especially well on my XL1200C because the front tire is nearly as wide as the rear. But it also works great on my sport bike with fat rear tire if I put the bike on a rear stand to make the bike vertical and use 2x4 blocks along the narrower front tire. Sighting from the rear, I line up the rear tire edges with the front blocks. What do you think?
Thanks, just started doing all my own maintenance in my Sporty. I have a friend who has a chain driven Road king told me that I needed to adjust my belt. Your video was quite informative. Just check my belt tension and it only move a half inch or less. So it's good. Thanks for the vid. Added it to my fav.'s
Thanks Rick, just spreadin' the love..lol... thanks for watching buddy...
Learned so much from you about servicing and taking care of bikes, love your style of teaching and putting things a cross. Love your passion while you doing it too. Oh, and hi Penny, behind any great man there is a great woman.
Thanks mate, you said that right... Penny is the driving force behind the videos, and I wouldn't do it without her! Thanks
Really nice work, enjoying these instructional videos! One other check I like to make is to sit behind the rear wheel, and rotate the tire/wheel assembly while watching the rear pulley. The belt should track in the middle of the pulley and not drift to either side making contact with the edge of the pulley. It's just a check to make sure you have true parallel alignment.
Great advice indeed there buddy, thanks for sharing..!
Oh man always there for us, genius. I was looking to buy a belt adjuster, or atleast that is what Harley calls it. But wondered if I really required it and thats when I thought of you ( as always), and decided to see if you had video on this. I have 2007 Iron 883, love it death.
I am actually taking this project a step beyond. I need to change the rear tire. Will be using the the zip tie method to get the tire off and a new one on. If I fail on my try, its off to a local garage to get tire off the rim and the new one on ( The professional way), but hoping it does not come to that.
So here is where I have many questions, I have the manual and it has confused me slightly.
1. getting the wheel off no problem
2. Getting the tire off and new one on ( Zip tie method, do google it), hopefully it works
3. Getting the wheel back on. Now thats where I am a little nervous -
1. As soon I take wheel off, I have taken the alignment out completely,
2. The tention on the belt is definitely gone as well. So now I am at the point where I have been able to put the wheel on the axel ( nothing is tightened yet) and back on the bike, that axel has room to move ( this is where the lug nut goes), it can move half an inch back and forth, does it not? so to tighten the belt to the acceptable tightness, where do I start with the wheel? Should I keep it in the center , tighten it slightly and check the belt and get it to the point where it is more or less right ( in terms of belt tightness), and then use the tiny screw to adjust the alignment and fine tune it? or should be doing something different.
3. how much can the tiny screw be moved, its not indefinite obviously.
4. Can you also confirm tightening the tiny screw ( aka turning it clockwise, so moving the screw in), moves the wheel back or forward? I am assuming based on mechanics that it makes the wheel roll a bit from left to right ( out of alignment) and the same screw on the other side (exhaust side) , clockwise bring it back in. In essence would this not loosen the belt again as i am pushing the wheel forward.
I really hope this is making sense, as it all makes sense in my head. Either way I am reaching out to a man best suited for this advice . On behalf of everyone thank you for all that you do.
Thanks Milo, just truckin along buddy... oh yeah.. thakns for watching. Del.
I love your opening on this. I don't have a mechanical background, so things that seem very simple to people educated in such matters are complicated and scary for me. Thanks for the videos.
+ExarPalantas Thanks mate, you're very kind, most things on bikes are pretty simple, its just a case of learning how its put together... ride safe and enjoy your bike buddy.. Del.
Hey buddy...yeah if the ground wire is touching and being rubbed, then i would move it...but Penny's one is close too, and it doesn't touch...if you look close for any rubbing marks and its untouched...then you can leave it alone.. only more it if its being rubbed... thanks for your kind support mate, and enjoy the Iron... cheers, Del.
Man! Excellent video! I have adjusted my belt twice in the past year and never checked to make sure it was parallel. I will be checking it today as I adjust me belt today. :)
Del the size spanner i use on rear spindle is 1-1/4 or 32mm not as u said 1 1/2 not haveing a go m8 ur vids are very good ive been working on bikes a long time i cant explain as clearly as yourself allso no need to drop the swinging are out when changeing a belt or endless chain remove bottom bolt on drive side shock G
By far the best videos out there, thank you
I usually never comment on the videos.. But I couldn't hold myself back from commenting on these amazing tutorial videos you putup.. Great job done explaining it so well.. Thank you again Mate!!.. Please work upon few more basic tutorials that we could do at home and save few bucks giving mah harley for service.. I own a fat bob just fyi..
Right on, it's nice to find someone on here who can explain stuff about my sportster, only cause I want to learn about it and save some bucks by doing it myself
Nicely done Moonfleet, As someone with a bit of machanical know how, Your explaination of this process should be easily understood by someone without said knowledge. I can work on cars, bikes are a new thing to me. Thanks for taking the time to do these vids. Give a shout out to your camera man/woman. Nice job.
Well done! Great video. Concise and to the point and clearly instructs how to do the job at hand. Perfect.
Ade, you are so right, i take a look around at the biker meet places i go to, and time and again ill see a bike with consumables that are way out of thier use limit, and the owners story is the same every time.."i have to wait till i get paid so i can book it in with the dealer. the dealer isnt the bad guy, just to them, he is 'the ONLY guy'.. if all of those of us who DO know 'how-to' spread the knowledge and helped other bikers, the feeling of family would return to biking.. thanks buddy, Del.
Thank you for the video. I will be using it to adjust and tighten my drive belt on my 15' street 750
You're welcome Robbie, thanks for watching mate... Del.
Thanks for all your tips on the Bonneville se and the Harley Sportster All the Best ALAN BROOKS
No problem, most welcome mate 👍
Thanks so much for all the input. When I looked into how to check belt tension according to Harley I would have needed a tool just to check it. Well thanks to you know I know.. Thanks again!! :)
Most welcome mate, glad it could help you.. Del.
Yeah, everything is easy if you know how.... it's important to pass on the things we know to anyone who can use it...thats what the brotherhood of biking is all about, and has been a bit forgotten in the modern 'plug and play' bike market.... thanks for your comments... take care.. Del.
I just bought my first shovelhead and am bound and determined to work on it myself!!! Will be using your channel a lot I bet!!
Love all the helpful tips. I have used your advice to put 13" ape hangers on my 03 sportster couldn't have managed to do it with out your helpful videos thanks and keep it up.
Thank's men!! I did a lot of changes to my bike and you made me save quite a lot of money not going to the stealership! Thank's again you rock!
Cheers bob, glad it helped you out buddy..
Hi Richard, thank you for your kind words, what you've experienced is exactly what I saw when me & Penny decided to make videos, so many explanations of things leave out vital steps and also worst of all, they tend to presume the viewer has a lot more knowledge than they might, so use in-speak and brevity, when the absolute novice needs it properly explained in lay man's terms and also a little insight into 'why' things are done in order to help with proper understanding of the task..good luck
What about top tension bud? Mines got play both ends
Well dpne Otto and thanks for your very kind comments... i just like to help other riders realise that most jobs on a bike are truly not that hard...and 13" apes on a Sporty...very kewl.. lets have a short walk round video then....?.. take care. Del.
You found me out mate, i normally tent to prefer brighter colours....but the orange reminds me of my mates American Mk3 Cortina....lol..
Thanks for all ur videos I use them for reference on my Harley knighster
Nice video. Motion Pro makes a really neat and inexpensive tool for checking rear wheel alignment. If you do your own maintenance on your Sportster, I highly recommend it. Also, Harley makes a nice tool to show how much force you are putting on the belt when measuring the deflection. I highly recommend that as well.
Hi Gerald, you are dead right, there are a few tools on the market for checking wheel alignment, but one of the simplest methods, that i didn't mention in this video was to just check the belt tacking in the back pulley, if there is an even gap each side of the belt and the pulley walls, then you're bang on... and thats tool?, Harley call it a "Deflecometer"...lol
Encore merci monsieur pour ces explications
You're very welcome, glad to know the videos can help you out!
This fucking guy is great! So much help over the last two years!
Glad it could help you mate !
yes....has to be the BEST mechanic in the UK hands down!!!would pay him a mil to come to the US and give my Harley Fatboy a overhaul!!!!!!!!!!!!!!!!!!The knowledge and know how is insane. Its amazing how a human being can be so damn smart/ on the mark!!! I only envy his skills!!
A Shovel...im proper jealous mate, i would love a nice straight, unmolested early 70's 1200 to make my own....good luck with it, and enjoy every moment...life is for the fun bits aye... thanks and take care, Del.
Hi mate, if you have the proper HD service manual form the dealer it covers it in great detail.....but others may not.. the caliper can stay put, but it makes it easier if you unbolt it and slide it forward...its hard to explain every step here and i dont have a video made of it so far. sorry not to be more help mate... good luck with it.
The only stupid question mate, is the one you don't ask...!!! yes you can adjust belt tension with the bike on the stand...in fact, its irrelevant to do it with the wheel off the deck..(i left it up there while i made the video for ease of demonstration)...the bike will ride with the weight on the wheels, so all adjustments are best made with the weight on the wheels...take care and ride safe.. good luck Del.
Awesome instruction, very thorough.
Thanks Terry, glad you enjoyed it..
Awesome video, I am contemplating changing my neutral switch on my own which requires removing the belt so was checking out your video! Awesome thanks! I don't think I have commented before but your other video have helped me as well!
OK, there must be a reason why its hitting the belt, it isn't designed to do that, see if you can remove the lead from its mounting, clean it up and re-route it a little so its out of the way, its hard to be exact without seeing your bike, but its just a game or trial and error, and doing what you need to do to make a small gap between them..
excellent video,very clear to understand,have a good one del
Really good vid (though I ain't got a Harley and don't want one), and found the wheel alignment idea great. I'll use it. Was rather disturbed to see what appeared to be a Guzzi 1100 Sport behind you, one of the most beautiful bikes ever made (got one of those), and somebody has plainly vandalized it. If you can find out who it was, I'll get them for you. Thanks for the tips. Steve.
awesome video brother, great at explaining things..
Thanks Chad, you're very kind, glad you enjoyed the video.
Had a watch of your video Otto, great bars, and look real class on the 03 model... take care.. Del.
Thanks mate, i appreciate the support.
Hi mate,I am planning a video on this subject quite soon,but the basic message is to go to a decent tool company like Machine Mart etc.,and buy a good quality basic 'general' kit,it will give you the essentials like screwdrivers, grips, pliers, couple of hammers, basic socket set, etc., then you could add to that some A/F spanners & allen keys, a set of torx bits, which would work on your imperial fasteners & always a spacious toolbox to add future tools...pay for quality & you won't regret it!
Great video, as you say it is obvious how to do it once you physicaly have, keep up the good videos mr & mrs del boy
good Vidi...could mention (for those that didn't observe) that the weight of the bike is off the wheel when the adjustment is made. Thanks..!
It's ok on a 'lowered' Harley, as the swing arm is level when lifted, therefore at it's tightest point!
thank you so much for your specific assistance on all your videos. well done. you have helped me tremendously mate!
Thanks Troy, very kind of you to say, so glad we've helped you out, all the best, D&Px
I love you man!!! You save me so much and you are so eloquent in your explanations! God bless!
Thanks buddy, glad to hear we could help, we're just launching a new series on Harley servicing, first video up tomorrow, maybe that can help you too!
All 5 diy video's on your 05 fatboy are Awesome, helpful to the fullest!! thanks again, Del and Penny!!!!!!
Hi mate...as with all the requests we get, we would need a Sportster with a belt that needed changing...we just load up what we have course to do here in the garage..maybe some day if Discovery step up our involvement and actually pay us for the contributions we make to them...we could make videos on wider subjects...but for now mate, the best thing i could suggest is get the proper genuine HD service manual, its a simple enough task and the manual covers every step...sorry cant be more help Del
Depending on the bike it should last at least 30k miles, but with meticulous care and retaining the belt guards properly it could last as long as 40-50k miles! All belts over high mileage will pick up nicks & cuts in the teeth & if they are bad, then yes, replace the belt, but generally you won't get that! Good luck with it, Del
Well done so easy to understand
Thanks Jeff, you are too kind... any dicision on the new bike direction mate..?
You are awesome, subscribed, super details explained,
I just got a new tire on and was crazy to know if i did put it back rigth
Nail polish... "The colour that you don't use very often-" LOL! Good one, mate! :D
have used you knowledge a few times thanks ...shout out from Canada... cheers mate!
Thanks Scott, glad we can help you buddy.. thanks for watching... not sure where in Canada you are, but for some i guess its time to park the bikes up and baton down about now?..
Thanks - glad the videos help! Cheers Del
I have a 2008 sportster custom 1200 , my belt is riding on the rear pulley to the right side , witch side should I adjust it , in or out . To make it ride in the center ?
Nice machine. Good instructions
awesome vids!!! I have a 2003 silver/black sportster and try to do my own maint.etc. your vids really help and save me a ton of money!! GREAT JOB
Good phylosophy mate.. ! works for me...
This is an extremely instructive and well made video! Thank you sir !
+Bobab13 Thank you Bobab, glad it helped you my friend, simple stuff, but not always common knowledge!
Absolutely. I am about to change the belt of my Sportster and I am really concerned about having everything aligned as it should be, after the replacement !
+Bobab13 NO problem, its not as hard as you may thing, but please feel free to drop me a line if you get stuck or have any concerns. Del .
+Moonfleet41 thanks !
Unless the bike has particularly high rear suspension then NO, imagine the swing arm moves through an arc, its tightest when the front pulley and back pulley are level with each other and the ground, as the bike then moves either up or down it loosens off a tiny bit, the presumption is that it is above parallel when unladen, and moves down to parallel when you sit on it..this is not the case if the bike has low shocks, the belt can take a bit of extra tension, its being loose that does damage.
Del allso if the wheel on ground the risk is breaking the adjuster i think its best to have rear wheel of ground wile adjusting but on ground for mes play in belt ive seen a bust ajuster when one of my customers tryed to adjust. With wheel on ground G
Is there a tolerance for the adjustment of both sides, I have a 0.3-0-5 millimeters difference on the adjustment bolts?
Very good video Del!
as always very usefull video! thanks a bunch
Thanks for sharing your expertise on the sporty vids, they have been very helpful in doing my own maintenance service. I just bought a license plate bracket that attaches to the axle and my question after seeing this video is when I take off the axle nut in order to place in the license plate bracket, will I have to set the belt tension when I am done? By taking off the axle nut, will that automatically unset my belt tension even if I put the bike on a bike stand? How would I know if I have unset the belt tension when I remove the axle nut?
I saw this one vid (Axle Mount License Plate Relocator Bracket) that shows an example of how easy it is to install a bracket on the axle and she does not set the belt tension. I didn't get my bracket from them I just thought I'd share what I saw on how to install a bracket. But, I trust your info and recommendations way more than all other vids on bikes that you have covered.
Hi buddy, don't sweat it on the belt tension as loosening the axle nut, and even removing it, will NOT release the tension... the two nuts on the very back ends of the swing arm which wind the threads in and out are what adjust the tension... as long as you don't move those then both the tension and wheel alignment will remain static! But it pays to check the tension whilst you have the nut loose just in case the belt has worn a little... hope that helps, good luck with it my friend, Del
Thanks again Del and for the excellent info you share on your vids!
You should use a belt tension tool so you put the right amount of tension on the belt when checking.
Might seem like a dumb question - but I noticed you have the bike on a bike hoist. Can you do this adjustment on the side stand? If memory serves me right, the Harley factory service manual mentions that for inspecting belt tension, the bike needs to be on the 'jiffy stand'. It makes no mention under the 'adjustment' section, however.
Harleys are a new thing to me...been tinkering on German and Japanese bikes for quite some time. I just want to make sure I don't muck anything up.
Thanks!
Well made , very easy , even for a beginer !!! thank you , now im doing in my home !
+Frederico Werly Thanks Frederico, im glad the video can help you my friend.. take care.. and good luck with your projects.. Del.
always checking in on ya ...