Very good video. I am not long after watching Paul at Haxby Shed do a review on the self same table from Vevor. It seems they don't always manage for the money because his had appreciable rock when sat on the mill table. He cured this by setting the table dead square, mounting it inverted and taking a pass over the base. That said, I still think these tools represent astonishing value.
I got one of those a while back, pretty sure mine’s the smaller version. For the money it’s a damn good table. I’ve only used it once or twice, but both times it’s been really useful. I bought one of their anvils too, I think it was either 20kg or 25kg, it was on special offer for £55 delivered. I had to finish it off with some filing (the horn was coated & flat on top) but still that meant I could get it to the shape I wanted. It’s got the 1” square hole for tools & has been an invaluable addition to my workshop.
I have one of these, different vendor but made in the same sweatshop. Dragging the indicator across the top when it's set for zero angle doesn't mean shit because that's obviously the setup used when they ground the top flat. You'll never use it at zero degrees (flat) anyway! Set the table angle for something different, say 30 degrees, and THEN indicate the top. What you will find, if it's like mine, is about .010-015" out of flat from one side to the other. If you tilt it the other way, the high end goes to the other side. The bearing surfaces between the top and base are not made with much precision. I keep several pieces of shim stock handy to place between the base and top to make the table somewhat usable, aka within a few thou. The crank feature of the table is poorly thought out and almost completely unusable! It's some kind of strange joke! As seen in the video, if you tilt the table towards you it's quickly becomes impossible to turn the crank at all. It's even worse if you clamp anything to the table like John's milling vise. Even when you tilt away from you, the crank mechanism prevents the table from fully reaching it's angle limits. I removed all that crank junk from mine and just snug the bolts when tilting the table. With the Indian sweatshop version of this table, they deleted the crank and cast rack and just have another bearing surface. I don't know if that one is more accurate or not. Another thing they forgot was to finish the top of the clamp-down area! It's not close to being flat and has a rough, cast surface that will mar your hardware. I was able to fix this by reaching in with a fly cutter and milling it flat like it should have been. The only thing going for it is price, but be prepared to do a lot of shimming and indicating when you need to use it.
Just another point to note.Vevor are currently the subject of UK Government action in terms of product safety of electrical appliances. This relates to a wide range of goods from welders to compressors to kitchen equipment.
Forget using protractors, get a magnetic base digital inclinometer, they read to 0.1 degree, make sure to zero it on the table of your machine first in case it is slightly off level.
That was well worth the money and I bet it sells well too. Very handy accessory. Just for something to do, I would try to get the backlash out of it just a little even though it doesn't matter that much.
It is wonderful to hear a canny lad utilising the King's english in such a colourful tone 😅..... Vevor do seem to be worthy of a high confidence rating.....keep up the great reviews,John.
John, I am contemplating to get the same angle-plate, but my 6x26 mill doesn't have a raiser-block (yet) - how much did you lift the head with that spacer? Thanks a lot for all the good clips!
Another nail in the coffin of UK based importers with reasonable overheads. How they make it so cheap? Because it’s probably made with melted down machine tools from the previous generation.
They have a minimun wage of a Chinese Factory Worker is 15Yuan per hour, and they do get breaks etc, but yes they work hard, the Government mainly only subsidizes Energy and Agriculture Companies..
Just ordered one from Vevor. It was showing in stock but an hour later they refunded me. No reason or explanation what's happening. Shit company to deal with!
Very good video. I am not long after watching Paul at Haxby Shed do a review on the self same table from Vevor. It seems they don't always manage for the money because his had appreciable rock when sat on the mill table. He cured this by setting the table dead square, mounting it inverted and taking a pass over the base. That said, I still think these tools represent astonishing value.
I got one of those a while back, pretty sure mine’s the smaller version.
For the money it’s a damn good table. I’ve only used it once or twice, but both times it’s been really useful.
I bought one of their anvils too, I think it was either 20kg or 25kg, it was on special offer for £55 delivered.
I had to finish it off with some filing (the horn was coated & flat on top) but still that meant I could get it to the shape I wanted.
It’s got the 1” square hole for tools & has been an invaluable addition to my workshop.
I have one of these, different vendor but made in the same sweatshop. Dragging the indicator across the top when it's set for zero angle doesn't mean shit because that's obviously the setup used when they ground the top flat. You'll never use it at zero degrees (flat) anyway! Set the table angle for something different, say 30 degrees, and THEN indicate the top. What you will find, if it's like mine, is about .010-015" out of flat from one side to the other. If you tilt it the other way, the high end goes to the other side. The bearing surfaces between the top and base are not made with much precision. I keep several pieces of shim stock handy to place between the base and top to make the table somewhat usable, aka within a few thou.
The crank feature of the table is poorly thought out and almost completely unusable! It's some kind of strange joke! As seen in the video, if you tilt the table towards you it's quickly becomes impossible to turn the crank at all. It's even worse if you clamp anything to the table like John's milling vise. Even when you tilt away from you, the crank mechanism prevents the table from fully reaching it's angle limits. I removed all that crank junk from mine and just snug the bolts when tilting the table. With the Indian sweatshop version of this table, they deleted the crank and cast rack and just have another bearing surface. I don't know if that one is more accurate or not.
Another thing they forgot was to finish the top of the clamp-down area! It's not close to being flat and has a rough, cast surface that will mar your hardware. I was able to fix this by reaching in with a fly cutter and milling it flat like it should have been.
The only thing going for it is price, but be prepared to do a lot of shimming and indicating when you need to use it.
Just another point to note.Vevor are currently the subject of UK Government action in terms of product safety of electrical appliances. This relates to a wide range of goods from welders to compressors to kitchen equipment.
Hi Carl, yes they currently don't sell electrical equipment in the UK; I wanted to test an ultrasonic cleaner. Cheers
I always enjoy your videos John…have a great evening
I have the same one, i mounted my 12 x 10 welding fixture table on it, love it.
Great review John, keep'um coming.
Forget using protractors, get a magnetic base digital inclinometer, they read to 0.1 degree, make sure to zero it on the table of your machine first in case it is slightly off level.
That was well worth the money and I bet it sells well too. Very handy accessory. Just for something to do, I would try to get the backlash out of it just a little even though it doesn't matter that much.
Great review john thanks nice bit of kit .
Aye, why aye man. Great video. I'll be looking at one soon. Still need to send you one of my cast iron welding squares one of these days.
Can't go wrong for that price very accurate 👍
Amazing quality and value for that price.
Thanks John
Hi John Think you made an impact on sales - when I tried to buy they were sold out!
It is wonderful to hear a canny lad utilising the King's english in such a colourful tone 😅..... Vevor do seem to be worthy of a high confidence rating.....keep up the great reviews,John.
I reviewed it on my channel too John and I agree it is very good for the money. I did have a bit of rock on the base so I skimmed it. Cheers Paul
That is what John's inspection dept would describe as 'piss wobbly' 🤣......Good value tools all the same,Paul.
Looks like it will do the job.
Great adj angle plate. I'd buy one in a heartbeat if I needed one.a lot of the vevor items seem to be good to Better then ya think.
Good to hear some proper Anglo Saxon language! 🙂
John, I am contemplating to get the same angle-plate, but my 6x26 mill doesn't have a raiser-block (yet) - how much did you lift the head with that spacer? Thanks a lot for all the good clips!
I lifted mine 5 inches
This is the best mod you can do on a 626
@@doubleboost Awesome, I have a 6 inch off-cut kicking about in the shed guess that just found its purpose now.
brill
Spanner went at 5:15 lad. 🙂
I have the 7" one great for the money $AU
Another nail in the coffin of UK based importers with reasonable overheads. How they make it so cheap? Because it’s probably made with melted down machine tools from the previous generation.
Nowt wrong with a bit of recycled cast iron.
The chinese govt subsidizes their companies. This is how they can afford this. That and labor is 9cents an hour and no bathroom breaks.
They have a minimun wage of a Chinese Factory Worker is 15Yuan per hour, and they do get breaks etc, but yes they work hard, the Government mainly only subsidizes Energy and Agriculture Companies..
@@65cj55 Their shipping is subsidized.
Just ordered one from Vevor. It was showing in stock but an hour later they refunded me. No reason or explanation what's happening.
Shit company to deal with!