| TUTORIAL ON FABRICATION OF ANIMAL FEED MIXER ( FULL AUTOMATIC ) - PART 3 | Herel Channel

This video is a follow-up video of the Tutorial Part 1 and Part 2 Animal Feed Mixer Fabrication which explains in more detail about the Fabrication of Animal Feed Mixer Machine which includes explanations:
1. Working Principle, Rotation and Mixer Fabrication.
2. Tubular Screw Conveyor Fabrication.
3. Installation of Electric Mixer Machine.
4. Calculation Sheet.
Before watching Tutorial on Fabrication of Animal Feed Mixer (Full Automatic) Part-3, it is advisable to watch Part-1 or Part-2 videos as follows:
1. Video Part-1
• Innovative & Creative ...
2. Video Part-2
• Innovative & Creative ...
For You who want softcopy of calculation sheets, fabrication of conveyor leaves (cutting blades) for Tubular Screw Conveyor fabrication as described in the video above, You can "subscribe" to this channel, then do a screen shoot and send the screenshoot results via email or WhatsApp below:
Email : [e-mail]
WhatsApp : [phone]
I will reply to Your email or WhatsApp by attaching a softcopy of the calculation sheet.
Hopefully this video can help all of you who are planning to make Animal Feed Mixer for Animal Husbandry or other purposes.
Regards
Innovative & Creative
Herel Channel

[@elnaddis]

InsyaAllah bermanfaat, sukses terus

[@herelchannel550]

Amiin YRA, terimakasih Pak

[@sulaimanibrahim4348]

Top banget...👍👍👍

[@abdanalbad601]

kalo di vidio itu pake mcb pak sedangkan kalo untuk otomatis apa menggunakan Operational Amplifier ( OP-AMP ), Load cell dan Modul ESP8266 atau Esp8266 untuk IoT ny ? apa bagaimana pak.
disini saya tertarik meneliti rancangan punya bapak, mohon sedikit informasi/gambaran ny. tak lupa saya jg cantum kan sumber dari video herelchannel ini🙏🙏

[@herelchannel550]

Ya

[@abdanalbad601]

kalo untuk yg sitem kendali otomatis apa komponen ny sama dengan yg manual? misal masih pake motor 1 fasa atau pake motor stepper pak.

[@herelchannel550]

Motornya tetap sama 1 phase, hanya utk kendali otomatisnya menggunakan mikrokontroller.

[@abdanalbad601]

@@herelchannel550 untuk sensor ny pake sensor infrared dan sensor temperatur suhu ya Pak 🙏

[@herelchannel550]

@@abdanalbad601 menggunakan load cell utk mengatur komposisi bahan baku pakan

[@abdanalbad601]

@@herelchannel550 baik Pak terimakasih banyak berkah ilmunya Pak 🙏

[@abdanalbad601]

Satu lagi Pak kalo untuk otomatis ny wireless terintegrasi iOt ya Pak?

[@damirimalisie3116]

Sangat bermanfaat.. 👍

[@herelchannel550]

Terimakasih Pak

[@abdanalbad601]

yg otomatis itu nanti input nya apa saja pak?

[@herelchannel550]

Loadcell dan sensor2 lainnya sesuai kebutuhan supaya mesin dapat bekerja otomatis.

[@andrefajarsetiawan9073]

Canel mas hery ya

[@herelchannel550]

Maaf ini dengan Mas Andre siapa ya ?

[@adname4066]

om mau nanya dong buat baling2 mixernya abis brpa

[@herelchannel550]

@AD NAME, Shaft Padu , Besi Hollow dan Besi Siku berkisar 500 ribuan.

[@hnmusic2853]

Itu pake mesin apa min

[@herelchannel550]

Maksudnya ? elektromotornya kah ?

[@013_ngurahteguh_tm7]

bisa minta no wa gan mau sharing” sedikit saya lagi merancang alat ini juga🙏

[@ayamkampung4570]

Harganya brpa mas,,?

[@herelchannel550]

Maaf Pak, baru utk keperluan sendiri, belum dikomersilkan

[@firnansaberlian8427]

Bahan bahan nya apa saja?

[@herelchannel550]

Bahan - bahan bisa dilihat di video ini th-cam.com/video/UlHxS_qMSRQ/w-d-xo.html