Finally! someone shows the complete process in setting it up. my friend gave me his because he was getting a new one (it still works perfectly) and i had no idea how to set it up since it didn't have instructions. thanks
I echo everyone’s comments here about the setup. I used it yesterday to set mine up and I appreciate you walking me through this, step by step. I’m normally terrible with this stuff and get someone else to do it for me but I was able to do it myself. I found screwing the monitors to the stand the hardest part but used my little step ladder to hold it while I screwed if in. Thanks again!
Thank you for your video! I just bought this monitor mount and when I opened the box and perused the instructions I thought, "This looks way too complicated. I should return it." And then I found your video. It filled in the gaps where the instructions weren't clear. I'm all set up and it's working great!
Perfect unboxing, but you don't need to hold the monitor up to the bracket to mount the screws. You can set the monitor on the table and put the screws into the top two holes. Then you lift the monitor and set it down into the cut outs. Then you place the bottom screws. But very in depth review, thank you
Thank you. I found this video AFTER I put mine together. And now I have to exchange it because the left arm will not adjust properly..won’t stay down even after turning the screw. It may be damaged according to their tech support rep. 😂 at your comment about people being careful not to get hit in the neck with the arm…I had that same thought of why the company had to put that in the book… it must’ve happened to someone(s) before. It made me super careful when I took the straps off…and I cut them off 🤦🏾♀️ not realizing I could just slide them off until I saw your video and I didn’t have a second person helping as recommended in the instructions.
I like how simple, thorough, and on point your video is. It's quite long though, but I appreciate how the angles, audio and video qualities are clear. Great video
Thank you for the comment Kael. Sometimes it's a struggle to figure out exactly how much to show or what information to represent. At the end I always say "hopefully this video can help and inform a few people, and I go with it. It's what I love to do. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. There are also lot of exciting things to come. Thank you so much for watching and the comment, I appreciate the support.
Man… you were thorough! Thank you for showing it all, telling me rather it’s Phillips/flat. Awesome video. Side note I found an adjustment on the knuckle holding the monitor!! It was extremely tight for me adjusting the orientation of the monitor.
If you put the top screws, part way in, on the back of the monitors first, then you can slide the plate under the screws to hold it until you can tighten them and add the bottom screws.
Thank you for this video! I just bought the arm yesterday, just waiting for it to arrive. The video was especially helpful because my tabletop is the glass tresanti desk.
It's great that people are creating videos like these, because those videos the companies create themselves are completely useless when you want to see how the monitor arm actually functions.
Thank you so much for this video, I've had this dual-mount for quite a while now but was never completly happy with it because I just couldn't get 2 different monitors aligned the way I wanted to. After watching your video I finally found my mistake. I thought of the adjustment of the arms was like a bolt/screw (put the arm in the position you want and then tighten the screw so it stays there), it never occured to me to think of them like increasing/decreasing hydraulic pressure.
Thanks for the great video! I appreciate your calm voice and demeanor, which has put me in a calm state of mind as I embark on installing my dual mount...LOL! If I can offer any advice to other viewers, make sure you don't mount your cable management tray too close to the edge of the desk, so there is room for the two clamps. I had to move one of my cable trays before installing my mount.
This video was very helpful! I didn't know monitors already came with the holes to screw the attachments in. I was panicking and thought I would have to do that?
Thank so much for the kind words, watching and leaving a comment. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. Thanks again for the kind words, watching and the comment. Good luck with the mount!!!
So glad I could help. Would love to hear all about it once you get it all st up. Good luck with everything. Thank you for watching and leaving a comment. I've been out for a bit dealing with a little medical issue but I'm back on the grind. Please subscribe to the channel like and share the video you find interesting. Thanks again for watching and the comment.
Why isnt the arm that holds the monitor staying where i want it? I turn counter clockwise to add tension and it pops straigh back up to default position
Was confused why it was velcro’d down. Decided to cut it. I sweat to you it missed my eye by less than a half inch. I got so lucky. Happened like 5 mins ago. Watching a guide before I make more mistakes lmao.
When I saw it there was no way I wasn't talking about that. Thank you so much for watching and the comment. Maybe I can provide some more laughs and information, please subscribe to the channel. I have more reviews, DIY, how to's, cool motivation and laughs. Thanks again for watching and the comment.
I truly appreciate you watching and taking the time to leave a comment. Thank you so much. Perhaps you could do a little a little something to help me out. Please subscribe to the channel, like this video and others you find useful and interesting. Thank again for watching and the kind words.
perfect apart from you install the two top screws with washers before offering the monitor up, then hang it it while you install the bottom screws. makes the single person install much easier
Thank you very much! I just got my dual arms and noticed some differences from your video. Firstly, the arms, lower & upper were not attached so no tension... trying to figure that out. Also, my monitors have a protrusion when the base is removed. When I attempt to hang the monitor, the plate cannot connect at the bottom. These are sceptre monitors. Any guidance will be greatly appreciated.. thank you
Thank you so much. Though it came with instructions, your video walked me through the whole process. Holding the monitor while screwing it into the mount was a little challenging, but I did it! I don't need a "honeydo" man/woman after all. Thanks again!
So happy I could help you make it happen. That was tough holding the displays, as I look back it may be possible to put the top screws and hang the display. Thanks for watching and the comment.
Came here to see where the the black spacers go..any help..seen he said between the display and the metal but I'm not seeing it upon further observation 🤦🏾♂️..I'm getting old..thanks in advance for assistance.. 🙏
So happy I was able to help and you got things up and running. Would love to hear about your set up and how things are going. Thank you for watching and leaving a comment. I've been out for a bit dealing with a little medical issue but I'm back on the grind. Please subscribe to the channel like and share the videos you find interesting. Thanks again for watching and the comment. Good luck with everything.
Happy I could help and everything worked out. I appreciate you watching and taking the time to leave a comment. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. I'm always hard at work producing new content, there are plenty of reviews, DIY, how to's and cool motivation to explore. Thanks again for watching and the comment. Happy computing.
Really, really great video. Thanks. I'm frustrated with the arms though because at the height I need, my choices are having the monitors either really far apart or right in my face. My desk is a bit narrow for this product. Not your fault. Still an excellent video.
Thanks for this....i came to see about vertical adjustment and you helped me out greatly. I have the wall mount version but this was just what i needed and i was happy to see I was already subbed. Have a good one brother!
This is so well done! Sadly my screws at the bottom are stuck entirely and nothing can get them out… was really looking forward to a super clean look but I’ll make due 🥹Thank you for the awesome video!
Hi, thanks for the video.... On time in 14:19, can you please tell me what is the height of the Mount/Clamp from the top of base part to the bottom Clamp part?
I hate when I'm just trying to find a tutorial/review and find someone incredibly wholesome instead. Thank you kind sir
Finally! someone shows the complete process in setting it up. my friend gave me his because he was getting a new one (it still works perfectly) and i had no idea how to set it up since it didn't have instructions. thanks
How did the monitor arm work out. Also can I ask what monitor your friend replaced this one with
@@bigdaddywaffles_6748 bro i ordered it and my fuckingb monitor doesn’t fit it idk how to take it off either pissed
@@emmittvalencia7645 update)
@@Cj-tg3ms update (got the wrong monitor arm/mount for my monitor, i guess theirs specific ones you need to get for even the adapter to work
what a nice friend
Just finished setting it up. Thanks for showing the full process. Was nice to just put it together at your pace. Works good so far.
THANK YOUUU for the full process. The instructions make so confusing and harder than it actually is!
I echo everyone’s comments here about the setup. I used it yesterday to set mine up and I appreciate you walking me through this, step by step. I’m normally terrible with this stuff and get someone else to do it for me but I was able to do it myself. I found screwing the monitors to the stand the hardest part but used my little step ladder to hold it while I screwed if in. Thanks again!
Thank you for your video! I just bought this monitor mount and when I opened the box and perused the instructions I thought, "This looks way too complicated. I should return it." And then I found your video. It filled in the gaps where the instructions weren't clear. I'm all set up and it's working great!
Perfect unboxing, but you don't need to hold the monitor up to the bracket to mount the screws. You can set the monitor on the table and put the screws into the top two holes. Then you lift the monitor and set it down into the cut outs. Then you place the bottom screws. But very in depth review, thank you
Thank you. I found this video AFTER I put mine together. And now I have to exchange it because the left arm will not adjust properly..won’t stay down even after turning the screw. It may be damaged according to their tech support rep.
😂 at your comment about people being careful not to get hit in the neck with the arm…I had that same thought of why the company had to put that in the book… it must’ve happened to someone(s) before. It made me super careful when I took the straps off…and I cut them off 🤦🏾♀️ not realizing I could just slide them off until I saw your video and I didn’t have a second person helping as recommended in the instructions.
Just bought these and was able to set this up by myself after watching the video. All of my questions were answered. Working great so far!
I have a similar table. An personally I just scooted the stand back a bit an lined the clamps up on the middle of the bar. Works fine for me
I like how simple, thorough, and on point your video is. It's quite long though, but I appreciate how the angles, audio and video qualities are clear. Great video
Thank you for the comment Kael. Sometimes it's a struggle to figure out exactly how much to show or what information to represent. At the end I always say "hopefully this video can help and inform a few people, and I go with it. It's what I love to do. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. There are also lot of exciting things to come. Thank you so much for watching and the comment, I appreciate the support.
Indeed about the warnings. If you see an obvious warning, it wasn't obvious to someone before you.
Thank you. Thank you. Thank you. I have been working my new job for 6 months uncomfortably.. finally 🙌🏽
Man… you were thorough! Thank you for showing it all, telling me rather it’s Phillips/flat. Awesome video.
Side note I found an adjustment on the knuckle holding the monitor!! It was extremely tight for me adjusting the orientation of the monitor.
Just bought this, thank you for the extremely helpful tutorial. 10/10 work.
Still finding this video to be the best one if anyone is wondering! Thank you for this!! ❤
If you put the top screws, part way in, on the back of the monitors first, then you can slide the plate under the screws to hold it until you can tighten them and add the bottom screws.
THANK YOU!!!! The instructions that came with this were worthless. Your video saved the day!
This is the best how to video I have ever seen. It solved problems that I didn’t even think of. Thanks!
Great tut. Saved me time to go through the manual. Can't be more grateful.
One of the most useful and informative videos. Thank you Daneal!
DUDE. I’m finishing up installing this today and tell me why. YOU AND I HAVE THE SAME MONITORS TOO. Omg Im in shock
It appears great minds think a like. Let me know how you're enjoying the mounts.
Thank you for this video! I just bought the arm yesterday, just waiting for it to arrive. The video was especially helpful because my tabletop is the glass tresanti desk.
It's great that people are creating videos like these, because those videos the companies create themselves are completely useless when you want to see how the monitor arm actually functions.
Thank you so much for this video, I've had this dual-mount for quite a while now but was never completly happy with it because I just couldn't get 2 different monitors aligned the way I wanted to. After watching your video I finally found my mistake. I thought of the adjustment of the arms was like a bolt/screw (put the arm in the position you want and then tighten the screw so it stays there), it never occured to me to think of them like increasing/decreasing hydraulic pressure.
Thank you so much, Daniel!! I was able to successfully set mine up with your help. 🎉🎉
I found the arm tension adjustments you showed in the video very helpful. Thanks!
Hey buddy!
Happy New Year!
You just made my day and my year.
I’m grateful to you!
Thanks for the great video! I appreciate your calm voice and demeanor, which has put me in a calm state of mind as I embark on installing my dual mount...LOL! If I can offer any advice to other viewers, make sure you don't mount your cable management tray too close to the edge of the desk, so there is room for the two clamps. I had to move one of my cable trays before installing my mount.
Soooo Helpful!!! Thank you so much. I opened this box and got an instant headache LOL you're awesome my friend!
Great work! This is how tutorials should be done
This video was very helpful! I didn't know monitors already came with the holes to screw the attachments in. I was panicking and thought I would have to do that?
THANK YOU for showing me how to properly adjust the height!!!!
Thank U just bought 1 didn’t kno how 2 adjust the arm pistons.
Great video, thanks. That warning image that you highlighted is hilarious! :D
Excellent video, I have the Tresanti as well and you explained everything so well. You've saved me a lot of stress and headache! Thank you!
How is the glass holding up?
Super underrated review and set-up! Bravo!
so very helpful.
Forget the instruction manual this is 100x better. THANKS!
Thank so much for the kind words, watching and leaving a comment. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. Thanks again for the kind words, watching and the comment. Good luck with the mount!!!
thank you so much. I have the same desk and had the same problem
Awesome review. Pretty thorough. Keep that quality sir.
Awesome video Daneal great instructions on how to set it up. I have the same style desk so this help me prepare the extra peace of wood 🪵✅
Thank you so much for showing the full process!!
Wow! What a great tutorial can’t thank you enough! You jus earned a new subscriber. Thanks for the help, lots of love 💕
Thanks a lot brutha brutha because I did not understand the gas tension thing.
Bought one off of your review! Thanks Amazon same day. Can't believe it. Same day or tomorrow
So glad I could help. Would love to hear all about it once you get it all st up. Good luck with everything. Thank you for watching and leaving a comment. I've been out for a bit dealing with a little medical issue but I'm back on the grind. Please subscribe to the channel like and share the video you find interesting. Thanks again for watching and the comment.
Thank you for making this vid. You made installing this stand super easy
Thank you so much! I looked at the manual and it was daunting. You made so easy! Really appreciate the video step insecurity. You’re awesome!
bro you've just save me hours of frustration, glad I came here even before unpacking :)
Elite instructions, thank you for the time and effort put into this video!
Why isnt the arm that holds the monitor staying where i want it? I turn counter clockwise to add tension and it pops straigh back up to default position
you are amazing - bless you!!! thanks for your explanation and patience. Love from France
Thank you for mentioning the neck warning. I saw it and nearly fell over. 🤣But you have a point, some poor soul has scars and a story to tell. 😳
Was confused why it was velcro’d down. Decided to cut it. I sweat to you it missed my eye by less than a half inch. I got so lucky. Happened like 5 mins ago. Watching a guide before I make more mistakes lmao.
I'm so glad you're ok, please be safe. I hope the video helped in other areas.
When I saw it there was no way I wasn't talking about that. Thank you so much for watching and the comment. Maybe I can provide some more laughs and information, please subscribe to the channel. I have more reviews, DIY, how to's, cool motivation and laughs. Thanks again for watching and the comment.
Ur vids are so professionell…. Ur audio quality is awesome.. Keep it up
I truly appreciate you watching and taking the time to leave a comment. Thank you so much. Perhaps you could do a little a little something to help me out. Please subscribe to the channel, like this video and others you find useful and interesting. Thank again for watching and the kind words.
Love the video! Any plans for the follow up video?
Huge thanks for this. It really is a nice arm, but the instructions for the cable runs are really terrible and this was super helpful.
This help me out a lot setting up! Thank you! Great job explaining!
This was delightful. Informative, for sure. But mostly delightful. Thanks!
This is a great explanation. THANK YOU!
perfect apart from you install the two top screws with washers before offering the monitor up, then hang it it while you install the bottom screws. makes the single person install much easier
Thank you for this! As always, one has questions when ready the instruction manual, you converted them all!! Appreciate ya!
Thank you so much my friend … it was extremely helpful. Thank you.
Very detailed and clear instructed video. Thanks for sharing.👍
This was great! Showed the whole setup and process! Love it!
Thank you very much! I just got my dual arms and noticed some differences from your video. Firstly, the arms, lower & upper were not attached so no tension... trying to figure that out. Also, my monitors have a protrusion when the base is removed. When I attempt to hang the monitor, the plate cannot connect at the bottom. These are sceptre monitors. Any guidance will be greatly appreciated.. thank you
Thank you so much. Though it came with instructions, your video walked me through the whole process. Holding the monitor while screwing it into the mount was a little challenging, but I did it! I don't need a "honeydo" man/woman after all. Thanks again!
So happy I could help you make it happen. That was tough holding the displays, as I look back it may be possible to put the top screws and hang the display. Thanks for watching and the comment.
SAME!! It was so confusing!!
super helpful to watch this while i setting up my own! good angles and great explanations. thank you!
Thank you very much sir... we did it!!!
Thanks for this. I just ordered these mounts and this a helpful video to watch as I’m waiting for the Amazon delivery.
Great video! Was looking to buy this
Thank you for taking the time to make a solid video with good tips my man!
Came here to see where the the black spacers go..any help..seen he said between the display and the metal but I'm not seeing it upon further observation 🤦🏾♂️..I'm getting old..thanks in advance for assistance.. 🙏
Thank you! Love this monitor arms! Got it on sale for $30
Perfect unboxing, setup, and review. Answered ALL the questions I had about them and seeing them in action. Definitely subbing to you.
This video definitely helped me out setting up mine.
So happy I was able to help and you got things up and running. Would love to hear about your set up and how things are going. Thank you for watching and leaving a comment. I've been out for a bit dealing with a little medical issue but I'm back on the grind. Please subscribe to the channel like and share the videos you find interesting. Thanks again for watching and the comment. Good luck with everything.
Amazing video with great instruction, I cannot thank you enough for this video. Perfect!
Thanks! I was having issues and this video really helped
Happy I could help and everything worked out. I appreciate you watching and taking the time to leave a comment. Perhaps you could do a little favor for me. Please subscribe to the channel, like this video and others you find useful and interesting. I'm always hard at work producing new content, there are plenty of reviews, DIY, how to's and cool motivation to explore. Thanks again for watching and the comment. Happy computing.
thank you for hitting cable management
An easier way to do this is by putting the top screw in partially and then latching the screws (almost like hooks) on to the top of the mount
Thank you soo much. Everything described nice and clean ❤🎉
Can you push your desk close against the wall with these?
This is a very helpful tutorial.
Thanks my friend i appreciate this big time
Thanks for the video. Nice job. Very helpful.
Thanks for sharing this vid guy! Super well explained and tackles all angles of setup on different table types. Good stuff 🤜🤛
Really, really great video. Thanks. I'm frustrated with the arms though because at the height I need, my choices are having the monitors either really far apart or right in my face. My desk is a bit narrow for this product. Not your fault. Still an excellent video.
Nevermind. It was me. Figured it out. Now it's perfect.
Please tell me how you figured it out. Im having the same issue
@@annkustoff1323hey man pls let me know what u did to fix this issue
Great tutorial which made my setup much easier. Excellent mount as well. Does all I want it to do.
Thanks for this....i came to see about vertical adjustment and you helped me out greatly. I have the wall mount version but this was just what i needed and i was happy to see I was already subbed. Have a good one brother!
thank you! this video is easy to follow and incredibly helpful!!!
This is so well done! Sadly my screws at the bottom are stuck entirely and nothing can get them out… was really looking forward to a super clean look but I’ll make due 🥹Thank you for the awesome video!
thanks for the in depth video. appreciate that.
Great video! Really helped me a lot, thanks 💯
Great job and thanks for a great instructional video touching key points. This video has helped me though my setup process; thanks mate 🙏👍
Very nice tutorial. Thank you very much sir.
Hi, thanks for the video.... On time in 14:19, can you please tell me what is the height of the Mount/Clamp from the top of base part to the bottom Clamp part?
Hey, great job on the video.
Thank you for making it so easy!
The montior you used is 100x100 vesa mounted supported right?
Amazing instructional video! Thank you Sir!
that's a nice desk, do you have a link on where I can get one like yours?
Thank you for the video.