Anodize Like A Pro At Home!

[@justelisISkauno]

Finally I found real video how to do it 💪💪💪 good job 👍👍👍

[@PlatingPulse23]

Can u do it with nickle?

[@Snapster911]

can it be polished afterwards?

[@filthfreaker_og]

what are your ratios for deionized water to acid?

[@blacknoir2404]

I'm guessing probably 15% sulfuric acid, the rest water.

[@dpitstopphtamiyamini4wdrac147]

Di water plus dye, does it need to be hot or warm when soaking?

[@CheckingYourRealityForYou]

cool. how many parts can u do with 4oz of dye or that gallon u just made?

[@soulrobotics]

Can be done with other chemicals than car battery electrolytes?... some that i can buy in a supermarket, like cleaning liquids or so. ...??

[@jestrada9052]

You can make a video anodizing a ring of aluminum in yellow color

[@kastebrothers7961]

Funciona con el titanio ?

[@jas20per]

I stopped this video the moment I saw Titanium rods. Nothing like spending money for a home project, I use Aluminium wire for confections and Aluminium for the other plate in the bath.

[@bujjyboddu6218]

Hii I am from India, thank you for the Great video. Can you please tell me what is the price of the dye .And also name of the dye in India and where it is available in India.thank you sir. I am an aluminum anodizer.

[@maniacaloffroad5338]

Which class of anodization is this considered?

[@cowboycandyvending1574]

Is it gold ?? Or orange?? Yellow

[@arielcercado2864]

Hey John, can I anodize lead blocks (weight blocks worn in belt by divers)? This could be better than painting over them.

[@johnscustomparts8195]

Try Wrapping www.wrapstock.com/ Some crazy ideas, J:)

[@mislam313]

Is it possible to anodise Lead metal?
No, it is not possible to anodise lead metal. Anodising is the process of electrochemically treating a metal surface to create a thin protective oxide layer. Lead is a very soft and malleable metal, and it does not form an oxide layer when exposed to an electrolyte.

[@ninasherylgaudiano4116]

HI SIR GOODDAY!
HOPE I CAN GET A REPLY EVEN THIS VIDEO IS OLD , IM JUST CURIOUS WHAT WAS "DI water mean?

[@erickjohnjoloyohoy778]

distilled water

[@kevinwoodard680]

Does that last a long time ?

[@1docg]

Please advise, what is Di water? What is the point of the drain cleaner? What is the exact ratio of acid to water? What is the cathode material?

[@johnscustomparts8195]

Hi Dave, "Deionized Water" Same water you would put in a car battery, you can get this cheap in Motor Garage Outlets.

[@phool289]

Is it possible on artificial ( brass) jewelry?

[@limitlessengineeringsoluti8067]

When I start anodizing attach black to cathode and red to part then my power supply trips and show 0 volt.

[@johnscustomparts8195]

Hi LES, Thank you for your comment, please try to keep the the two electrodes separate, to stop them connecting,
I Guess you tried that! You may have equipment failure?🤔, I searched for you on a power supply, and attached the link: ebay.to/3we7Z2R Hope this helps, thank you

[@swamppeful]

Hey! Great video! Is it possible to use this same technique to dye sterling silver or possibly 14k gold? If possible what needs to be considered? Best regards, S.

[@shaunm2208]

Thanks bud

[@lintaubuo2019]

You mean tap h2 is hydrogen water

[@dereklaverty13]

Might have been a good idea to place the part where we can see the process

[@stephenadams8584]

John’s custom parts . What is the dye you used ? Brand , what is it typically used for ? Just something so I can try to find it . Thank you for any information.

[@johncody4721]

www.ebay.com/usr/marawe-international (From Germany Anodising dye yellow - Anodizing DIY at home - Anodizing color for aluminium) Thank you

[@tflatter8912]

@@johncody4721 where do you get the sulfuric acid can’t find it anywhere

[@johnscustomparts8195]

You can use Battery Acid, Or use sodium bisulfate instead of sulfuric acid. Thank you

[@audiophileuser]

Hi. I have a question. I'm about to anodize a fishing reel spool however there is an engineering plastic acetal inside is it okay to proceed? Thanks!

[@BizyBen]

Without seeing the reel, I cannot say for sure if you can anodize it for sure.....
If you can, take out the Acetal (Self Lubricating Plastic, used mainly for bearings) before anodize is best.
Aways best to remove an assembly before treating it as the part needs to be super clean
Also, make sure the aluminium is not cast.

[@audiophileuser]

@@BizyBen thanks for the pro tip! i did mine but i wasn't satisfied and still learning how :) redoing it on a test dummy before going actual.
Doing these things require the right preparation and tools

[@vickysekar7232]

Fantastic kindly upload gold colour plz

[@johncody4721]

www.ebay.com/usr/marawe-international (From Germany Anodising dye yellow - Anodizing DIY at home - Anodizing color for aluminium) Thank you

[@petterblack6459]

What is the brand of the paint and how long was it immersed in the paint with water ..?

[@johncody4721]

www.ebay.com/usr/marawe-international (From Germany Anodising dye yellow - Anodizing DIY at home - Anodizing color for aluminium) Thank you

[@ays2013boss]

Can somebody please put a video on TH-cam from start to finish everything you need you need to start anodizing. I want to start analyzing gun parts but nobody on the Internet gives a good video of everything you need and how to do it from start to finish. It looks like I'm going to have to figure it out and then be the one to put a video on TH-cam

[@johnscustomparts8195]

Hi AHPS, i understand can be frustrating. I had the same problem with different types of Grades of Aluminums. Also there are many factors that contribute to a set up, if you need any help, let me know and i will try to support. By the way try Caswell Plating: caswellplating.com/

[@fireworks1727]

Your Fing background music makes this video unwatchable..

[@brianizes4605]

Try sticking some peanut butter in your f'ing ears,
a$$hat

[@alack1153]

Same

[@OEFarredondo]

Opposite

[@dmuhl84]

All I hear is music With NO explanations of what you are doing

[@kevinray2453]

this is the first (of MANY) videos that suggests the use of tap water instead of distilled or de-ionized water

[@phool289]

What is tap water?

[@MrPdforeman]

Some audio other than this annoying music would be great/ helpful

[@jppalm3944]

Music annoying and sucks

[@MOTOTRUST]

Your video is long, very long, too much long!!!!
It s very anoying, you could shut off unusefull parts

[@johnscustomparts8195]

Thank you for the valuable comment "MT", appreciate real feed back with constructive support. Have a Great New Year! J:)

[@MOTOTRUST]

@@johnscustomparts8195 you're welcome.
Hope it will be helpful

[@soulrobotics]

@@johnscustomparts8195 hahaha lol.... lazy People! You can speed up the video or go forward if you want, that is the concept of the video!. btw the video is great.

[@burtpanzer]

It took 3 and a half minutes just to say "soak the parts and rinse them well" and another 3 and a half minutes to begin the electrolysis which is just an unnecessary waste of time... thanks.