I got my new part for the CR-200B. At 1:12 the video skips. The screws that come with the part is too short. They do not reach! Original in old part is also too short. What now?
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
Hello, I'm having a problem. A device with the feature of restarting when the electricity goes out, my tray goes down and when we start it from the same place again, the tray stays down, the device works in vain, how can we solve this?
Help guys! I have a cr200b and bought a spider hotend for it ... But my new hot end is fatter so the filament hole doesn't line up ! Anyone know how I could fix this?
This replacement hotend is a disaster. Just inside the top of the radiator is a metal ring to stop the filament feeding tube going down to the heating tip. It creates a cavity between the top of the radiator and the tip, but the cavity is wide inside. After printing for about 2 mins the filament stops flowing and the inside of the radiator fills up with melted filament. Did the engineers forget that the filament can retract to prevent stringing? It pulls the melting filament tip into the cavity, almost instantly cooling it down due to the effect of the radiator, and create a blob preventing the filament from feeding back down.
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
@@crealityafter-sale5706 Already go through your website. Hotend Kit not available for CR200B Please suggest where to go or share proper link for online order
I got my new part for the CR-200B. At 1:12 the video skips. The screws that come with the part is too short. They do not reach! Original in old part is also too short. What now?
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
Same happened to me. I ordered M3 x 25mm screws. Hopefully that will resolve the issue.
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
Got some M3x25mm bolts and they work perfectly to attach this hotend. The M3x20mm that come with the part is incorrect.
Hello, I'm having a problem. A device with the feature of restarting when the electricity goes out, my tray goes down and when we start it from the same place again, the tray stays down, the device works in vain, how can we solve this?
Help guys! I have a cr200b and bought a spider hotend for it ... But my new hot end is fatter so the filament hole doesn't line up ! Anyone know how I could fix this?
How do we order a new hot end kit?
This replacement hotend is a disaster. Just inside the top of the radiator is a metal ring to stop the filament feeding tube going down to the heating tip. It creates a cavity between the top of the radiator and the tip, but the cavity is wide inside. After printing for about 2 mins the filament stops flowing and the inside of the radiator fills up with melted filament.
Did the engineers forget that the filament can retract to prevent stringing? It pulls the melting filament tip into the cavity, almost instantly cooling it down due to the effect of the radiator, and create a blob preventing the filament from feeding back down.
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Thank you Jako, I noticed the same and thought that cant be. They are not so stupid. But now.... Is there a way to fix it?
@@JurgenIntemannjust ditch this Pos contraption and get a good printer
I had the same problem just open the nuzzle and put a a pice of teflon tube from the bottom
Where to find this hotend for Cr200b???
Hello, you can buy the corresponding accessories through this website（www.creality3dofficial.com/）
@@crealityafter-sale5706 Already go through your website. Hotend Kit not available for CR200B
Please suggest where to go or share proper link for online order
Hello, about your problem, please contact our official after-sales service staff, they will help you better.（Official service email：cs@creality.com）
www.creality3dparts.com/product/creality-cr-200b-hotend-kit/
Is there anywhere to buy parts for this? I.e. a new hotend or thermistor cartridge?
Hello, you can buy the accessories you need through this website（Official website: www.creality3dofficial.com/）
The link you have provided does not exist
It's not easy to change and I broke the part trying.