I'm on this section of the process now.. thanks a lot! now my question is I don't have any options for "manual serial device selection". can i just leave that blank and hit "BUILD"? Thanks!!!
@@DarrenAllatt okay I figured it out I had to clear platformio dep. then try again, I hit build & it said success this time. So I guess that part is done of my controller setup? Now I have the EP2 elrs happymodel being shipped out , am I on the right path ?
@@DarrenAllatt thanks so much man! You helped a lot I appreciate it a lot. Now I need some links to what I should do when I get the EP2 & possibly wire it or use the sbus port that my xm+ is connected to for easy disconnect of the XM+..
Thanks for your great instruction videos always. I have the elrs module on my T-lite and activated the lq and rssi dbm in betaflight but it does not show on my dji goggles v2. I can just manage to see the rssi only out of these 3 but for erls this is not helpful. Maybe it is not possible to see those 2 values in the dji goggles? Other values like battery voltage per cell show up...
Hi, I've done everything you've explained here and from previous video and get no stick inputs in Betaflight? Using the TLite with the happymodel tx & binding to flywoo nano 1s with elrs rx. It looks like it's bound with solid blue led on the rx. Also in the lua script on the radio i see an option for other devices which lists the flywoo rx in there. Nothing happens when i click it though. Internal module is off, external is on and set to crsf & same in Betaflight. Any help or suggestions guys? Im 3 days at this now and it's not fun lol
I’m going to assume you have a brand new radio? Have you setup the Inputs & Mixer? Watch this video from 14th minute to see how to do that. How to setup your Radio for ExpressLRS | th-cam.com/video/M45lx3yKK_4/w-d-xo.html If you’ve done that and it doesn’t work let me know
Here we go I'm a total noob so I have a really newb question. I don't know much about this transmitter receiver crap. Because with my RCS I ran cars you have the remote control and you had your car's receiving unit and then the central processing unit which activated whatever servos you needed to be actuated. Now with this fpv drone stuff I'm very much ignorant. I own too however and I thought I knew a little something about what I was buying but I guess not. Problem is I have two eye flights one is the not school version 2 bind and fly with the crossfire nano RX. With exception of it's like a TBS crossfire RX. Then I have a I flight Titan XL BNF also with the TBS crossfire nano. No thinking that crossfire was cross-compatible technology as it's described I bought the same two controllers you're reviewing sort of. I bought a jumper tea light and I got the beta fpv external crossfire module 900 mhz. After all these attempts at flashing and binding and nothing seems to be happening I've come to the conclusion that none of these are really cross technology compatible. You need a beta fpv receiver and a beta fpv transmitter right? Like a TBS crossfire receiver is only going to work with a TBS crossfire transmitter? I thought all of this was open code to be shared and used by other companies. This is really getting on my nerves cuz it's like I got to dump more money into more receivers, or a different module for my jumper tea light which is probably the route I'm going to get it's cheapest. Because I don't feel like soldering and breaking any of my connections. I just want to get my damn birds up in the sky I've had him for like 3 months now
Ah, you didn’t get a BetaFPV external Crossfire module. You got a 900mhz ExpressLRS BetaFPV module. Only TBS make Crossfire Tx and RX modules you’ll need to get a TBS Crossfire Nano TX for your Jumper T Lite. Basically, think of it like this. When you buy an RX or TX they are “network/carrier locked” - kind of like how you buy a mobile phone that only works on one network. You need to make sure you are buying the same “network/carrier” but also the same frequency. If you are just buying crossfire gear you’ll be fine.
Great stuff Darren. I really enjoyed this video.
I'm on this section of the process now.. thanks a lot! now my question is I don't have any options for "manual serial device selection". can i just leave that blank and hit "BUILD"? Thanks!!!
Just hit build & it said build error … any ideas ?
@@adrianau4246 you need to select the target from the list
@@DarrenAllatt okay I figured it out I had to clear platformio dep. then try again, I hit build & it said success this time. So I guess that part is done of my controller setup? Now I have the EP2 elrs happymodel being shipped out , am I on the right path ?
@@adrianau4246 yes you are. Well done
@@DarrenAllatt thanks so much man! You helped a lot I appreciate it a lot. Now I need some links to what I should do when I get the EP2 & possibly wire it or use the sbus port that my xm+ is connected to for easy disconnect of the XM+..
Thanks I actually followed this one, I am no longer terrified lol (Subbed)
Hey , Darren . I has Afro Naze23 flight controller .Can I use ELRS receiver . will it work? Thanks...
I have no idea what that is, can you post a link?
Thanks for your great instruction videos always. I have the elrs module on my T-lite and activated the lq and rssi dbm in betaflight but it does not show on my dji goggles v2. I can just manage to see the rssi only out of these 3 but for erls this is not helpful. Maybe it is not possible to see those 2 values in the dji goggles? Other values like battery voltage per cell show up...
DJI doesn’t support LQ only RSSI. You can go ti the receiver tab and set the RSSI element to show Aux 11 which is LQ… LQ is more important than RSSI
@@DarrenAllatt thanks but how do you know that AUX 11 is LQ ?
It’s in the ELRS wiki
@@DarrenAllatt i see, again thanks for your help 🙂
Hi, I've done everything you've explained here and from previous video and get no stick inputs in Betaflight? Using the TLite with the happymodel tx & binding to flywoo nano 1s with elrs rx. It looks like it's bound with solid blue led on the rx. Also in the lua script on the radio i see an option for other devices which lists the flywoo rx in there. Nothing happens when i click it though. Internal module is off, external is on and set to crsf & same in Betaflight.
Any help or suggestions guys? Im 3 days at this now and it's not fun lol
Ps: I'm on the latest Opentx, Betaflight, & Elrs configurator*
I’m going to assume you have a brand new radio? Have you setup the Inputs & Mixer?
Watch this video from 14th minute to see how to do that. How to setup your Radio for ExpressLRS |
th-cam.com/video/M45lx3yKK_4/w-d-xo.html
If you’ve done that and it doesn’t work let me know
Here we go I'm a total noob so I have a really newb question. I don't know much about this transmitter receiver crap. Because with my RCS I ran cars you have the remote control and you had your car's receiving unit and then the central processing unit which activated whatever servos you needed to be actuated. Now with this fpv drone stuff I'm very much ignorant. I own too however and I thought I knew a little something about what I was buying but I guess not. Problem is I have two eye flights one is the not school version 2 bind and fly with the crossfire nano RX. With exception of it's like a TBS crossfire RX. Then I have a I flight Titan XL BNF also with the TBS crossfire nano. No thinking that crossfire was cross-compatible technology as it's described I bought the same two controllers you're reviewing sort of. I bought a jumper tea light and I got the beta fpv external crossfire module 900 mhz. After all these attempts at flashing and binding and nothing seems to be happening I've come to the conclusion that none of these are really cross technology compatible. You need a beta fpv receiver and a beta fpv transmitter right? Like a TBS crossfire receiver is only going to work with a TBS crossfire transmitter? I thought all of this was open code to be shared and used by other companies. This is really getting on my nerves cuz it's like I got to dump more money into more receivers, or a different module for my jumper tea light which is probably the route I'm going to get it's cheapest. Because I don't feel like soldering and breaking any of my connections. I just want to get my damn birds up in the sky I've had him for like 3 months now
Ah, you didn’t get a BetaFPV external Crossfire module. You got a 900mhz ExpressLRS BetaFPV module.
Only TBS make Crossfire Tx and RX modules you’ll need to get a TBS Crossfire Nano TX for your Jumper T Lite.
Basically, think of it like this. When you buy an RX or TX they are “network/carrier locked” - kind of like how you buy a mobile phone that only works on one network. You need to make sure you are buying the same “network/carrier” but also the same frequency. If you are just buying crossfire gear you’ll be fine.