Important LAN hub settings for Soundswitch if you are using: Fader/ch 2 as left deck layer A. Layer B on ch 1. Right deck layer A on ch 3 and layer B on ch 4. Set in in this mode (taken from the original manual). Left deck media player to port 2. Right Deck media player to port 3.
Hey guys, I've used SoundSwitch with my SC5000M X1800 setup, and I came to the realisation that Deck 1 Layer A had to be to mapped to channel 1. Is it possible that Deck 1 Layer A is mapped to Channel 2 and SoundSwitch will still work?
You guys really need to provide better support. Just sending an email and waiting for an answer to something that will likely require a little back and forth makes no sense for a product like this. You should charge for the support but it should be readily available over the phone or chat or this whole product is useless
Give Matt a raise. These videos are tremendously helpful.
Where is the video you mentioned for external mixer setup? @Soundswitch
I need those too
Important LAN hub settings for Soundswitch if you are using: Fader/ch 2 as left deck layer A. Layer B on ch 1. Right deck layer A on ch 3 and layer B on ch 4. Set in in this mode (taken from the original manual). Left deck media player to port 2. Right Deck media player to port 3.
I wonder if there's a way to use a control one in lieu of a laptop running soundswitch, as I use with my Prime 4?
i have the same DJ set. Burt, i dont have the blue point in SoundSwitch software near LINK zone. why?
Would you mind setting up a video consultation with me?
Hi , the sc6000 prime is compatible with another mixer ( for exemple pioneer or Rane ) for used SoundSwitch ?
Yes I have the usb connector Soundswitch
Does soundswitch work with DJM-900nxs2 and what do i need in between the laptop and lights?
Sure does. You can use the MIDI clock function in the DJM-900nxs2.
This video shows your how:
th-cam.com/video/gRsTsb2zIRI/w-d-xo.html
We need a video how to connect 3 and 4 players running engine lighting on one of the players.
Hi, I have two SC5000s and a XONE 96 mixer. Will Soundswitch work with this setup? Thanks.
Do you know if the XONE 96 has MIDI output for the faders?
Hey guys, I've used SoundSwitch with my SC5000M X1800 setup, and I came to the realisation that Deck 1 Layer A had to be to mapped to channel 1. Is it possible that Deck 1 Layer A is mapped to Channel 2 and SoundSwitch will still work?
Hey Franky,
Get in touch on support@soundswitch.com and we will help work through the issue.
@@soundswitch4427 Thanks will do.
You guys really need to provide better support. Just sending an email and waiting for an answer to something that will likely require a little back and forth makes no sense for a product like this. You should charge for the support but it should be readily available over the phone or chat or this whole product is useless