You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
My Model WET4027HW0 is not like this one. Was able to remove the lid....but there are no clips. Then removed those beige colored things. That's it! :( There are a bunch of screws on cover but also on some brackets that appear to hold the dryer up there. Help me!
Thank you so much! I’m on a limited income and needed to fix this part on my washer. Your video helped give me the confidence to fix it myself. And I just finished fixing it! Thank you so much!
Hi Karen, I just read your comment and I was wondering what the problem was with your washer combo. Mine washes but the machine stops right before the drain and spin. I like you, want to problem solve and fix this myself, then we will both be proud of ourselves!...no man around to help out.
@@t.b.1596 hello! I’d suggest start by googling ‘washer stops before rinse’. Read and watch videos to try and get sense of what part it is. From just briefly looking, mentioned was possibly the problem being a faulty ‘water inlet valve’. Also see if there is a video for your machine brand that shows you what’s involved to replace it. Good luck!
@@karenwright1869 Thanks for getting back to me. I have watched video's and read your comment. I was just wondering what the problem was with your machine. Could you please comment back and let me know what happened to yours? thank you!
@@t.b.1596 Intermitantly the washer would stop mid cycle, didn't matter if it was to drain, or spin, or oscillate. Sometimes I would 'fix' it, pushed lid down harder, jiggling the plastic bit that receives the plastic stick thing on the lid that makes it work when the lid is down. Then it smoked and stopped working all together.
Literally JUST did this. Relatively straight forward. A couple issues we had: We did NOT have a nut driver, so had to use a wrench to undo bolts. Grounding wire for our original switch at the switch part was superglued to grounding metal=a little annoying. And third, to get new switch lined up, we lifted part too high, which caused the lid springs to unseat, so when we tried to close it, we broke them. No biggie, since it still works, it's just our lid now will not stay open or have the little extra force to stay closed. Other than these minor issues(you live and learn), it seems to be working. We are a little concerned about the water fill in wash, not sure if new switch affects this, but we started with "extra small" and the amount of water seemed too much. Never really looked before though, so we will just keep an eye on it.
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
Nice video but I have de Whirpool Model LTE5243DQ6 and there are no clips. How could I remove the top of the washer to replace the lid switch in my model?
Great video!! One question: Can the washer be used (reinstalling all the parts first of course) while waiting for the lid lock switch to arrive? Will the machine operate without the lid lock switch? Thank you for video!!
@@repairclinic I have a question... How do I diagnose if this is the problem? My twin thin had working fine and all of a sudden not. Nothing, complete silence when I turn it on. Dryer works. Thank you
This video just saved me probably hundreds of dollars. All hail the youtube revolution!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
I’m the least handy person ever, but this video really helped me tap into Dad-mode and get the job done! Thank you!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
I ordered my parts, and Repair Clinic delivered them within days. Exactly as ordered. Listen folks this firm makes it easy, because it is. Thanks RC!
My Model WET4027HW0 is not like this one. Was able to remove the lid....but there are no clips. Then removed those beige colored things. That's it! :( There are a bunch of screws on cover but also on some brackets that appear to hold the dryer up there. Help me!
Thank you so much! I’m on a limited income and needed to fix this part on my washer. Your video helped give me the confidence to fix it myself. And I just finished fixing it! Thank you so much!
Hi Karen,
I just read your comment and I was wondering what the problem was with your washer combo. Mine washes but the machine stops right before the drain and spin. I like you, want to problem solve and fix this myself, then we will both be proud of ourselves!...no man around to help out.
@@t.b.1596 hello! I’d suggest start by googling ‘washer stops before rinse’. Read and watch videos to try and get sense of what part it is. From just briefly looking, mentioned was possibly the problem being a faulty ‘water inlet valve’. Also see if there is a video for your machine brand that shows you what’s involved to replace it. Good luck!
@@karenwright1869 Thanks for getting back to me. I have watched video's and read your comment. I was just wondering what the problem was with your machine. Could you please comment back and let me know what happened to yours? thank you!
@@t.b.1596 Intermitantly the washer would stop mid cycle, didn't matter if it was to drain, or spin, or oscillate. Sometimes I would 'fix' it, pushed lid down harder, jiggling the plastic bit that receives the plastic stick thing on the lid that makes it work when the lid is down. Then it smoked and stopped working all together.
Literally JUST did this. Relatively straight forward. A couple issues we had:
We did NOT have a nut driver, so had to use a wrench to undo bolts.
Grounding wire for our original switch at the switch part was superglued to grounding metal=a little annoying.
And third, to get new switch lined up, we lifted part too high, which caused the lid springs to unseat, so when we tried to close it, we broke them. No biggie, since it still works, it's just our lid now will not stay open or have the little extra force to stay closed. Other than these minor issues(you live and learn), it seems to be working. We are a little concerned about the water fill in wash, not sure if new switch affects this, but we started with "extra small" and the amount of water seemed too much. Never really looked before though, so we will just keep an eye on it.
The w/d I am working on doesn't have those clips to release the top panel.
I do not have the clips either-is there any answer to how to remove the lid somewhere??
Mine doesn't have the spring clips, i can't remove the panel. 😐
Your video is very helpful! We watched it for fixing our washer!!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thank you. We fixed our washer lid switch thanks to this video!
Thanks so much!!! Turned a horrible Memorial Day disaster into about a 1 hour fix!
Nice video but I have de Whirpool Model LTE5243DQ6 and there are no clips. How could I remove the top of the washer to replace the lid switch in my model?
Hi did you manage to figure out how to remove the top?
Outstanding walkthrough
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
I do not have the clips behind the center panel either-is there any answer to how to remove the lid somewhere??
Thank you so much you saved me a hundred dollars!!
Thank you it was easy to do because of you !
Great video!! One question: Can the washer be used (reinstalling all the parts first of course) while waiting for the lid lock switch to arrive? Will the machine operate without the lid lock switch? Thank you for video!!
Very Nice
I would like to thankyou on the video very helpful ,now where can this be ordered from and how much is it
This video was so great even I was able to do to.. Many thanks!
@@repairclinic I have a question... How do I diagnose if this is the problem?
My twin thin had working fine and all of a sudden not. Nothing, complete silence when I turn it on. Dryer works.
Thank you
Help! The grounding wire clip is stuck to the wire. How do I get it off or what to I look for to purchase a new one?
does the metal part that the switch goes into to activate the machine come with this piece?
so a bad lidswitch is why drain motor won't engage? I think that might be my problem
I can't find the right lid switch anywhere
Thank you!!!! Perfect instruction!!
No test procedure to prove the switch is the faulty component?