Thanks for the video! I was living with this little annoying window problem for 7 years. In Nissan they didn't know how to fix it. Now thanks to you I got rid of the problem.
Just replaced the driver window mechanism, as the old ones cable had unwound, fitted a new mechanism and was then able to reset the full up position following your video, thanks saved a lot of head scratching and a few pounds doing it myself.
Just had to do this for my grandmother. 😂 She was told it would need a new switch and or motor but I knew there should be some sort of reset function/height adjustment for the pinch protection so googled it and 2 minutes later its working again.
Great video! Just a few of points if the author scruffymid doesn’t mind my input. The circuit is very sensitive and can bump the window back if the glass sticks to the rubber channel which could trigger the ant-pinch function. Liberally lubricate the rubber channel with silicon spray or similar. Carry out the reset procedure if this fails. This is taken from an Australian site: 1. Close the door window completely. 2. Press the reset switch and open the door window completely. 3. Release the reset switch. Ensure the reset switch has returned to the original position, and then close the door window completely. 4. The limit switch is now reset. *Be sure to manually open or close the door window (Do not use the automatic open-close procedure). When all is done, test the anti-pinch function by holding a piece of wood in the way of the closing window. Before closing up it would be a good idea to lightly lubricate the metal clips with petroleum jelly.
Thanks, just done my window, was like this when i got mine. Holding the reset button was temperamental, which I had end up doing it around 3 times to get correct.
Not sure exactly what I did but after watching your vid and removing the panel as you did, a wiggle of the screwdriver managed to sort. Untold stress avoided. Cheers
Drivers seat belt warning light dash won't go out when plugging seat belt into stalk...but will go out if I plug in passenger seatbelt into passenger seat belt stalk...any tho ghts on rectifying problem appreciate...
scruffymid ....cheers I think it's happened before andcagian resolved itself after car was parked up after period time or next day?...strange?... Like your vids thanks...gremlins hehe!
I got this suv model, my driver's side door window goes so slow going up and when it rains it's even slower or stops 20% up, i ended up having to pull it up while using the botton.
I think they are linked directly together so is likely the switch itself. The only way to check is to take the switch out and test it, but if you can get a cheap switch on eBay you could swap it and hope it works. I have the wiring diagram somewhere, will try and find it tomorrow.
All our passenger windows go down with their own switch, but not up. Have to get driver to put up. Any help would be great. Not convinced all switchers are worn, happened about 12 months after getting car.
Hello, my back passenger window doesnt work itself, i tried to fix it myself but now it doesnt work either from driver switch...i checked there is no blown fuse, there is electricity at the switch, but it still wont work, all other windows are okay...any suggestions would be helpful
They changed the model in 2007 / 2008 but I don't know if it was a facelift only. Unfortunately the only way to know is to take the handle or door panel off and look for the same motor system.
Thanks for the video! I was living with this little annoying window problem for 7 years. In Nissan they didn't know how to fix it. Now thanks to you I got rid of the problem.
Just replaced the driver window mechanism, as the old ones cable had unwound, fitted a new mechanism and was then able to reset the full up position following your video, thanks saved a lot of head scratching and a few pounds doing it myself.
Just had to do this for my grandmother. 😂
She was told it would need a new switch and or motor but I knew there should be some sort of reset function/height adjustment for the pinch protection so googled it and 2 minutes later its working again.
Great video! Just a few of points if the author scruffymid doesn’t mind my input. The circuit is very sensitive and can bump the window back if the glass sticks to the rubber channel which could trigger the ant-pinch function. Liberally lubricate the rubber channel with silicon spray or similar. Carry out the reset procedure if this fails.
This is taken from an Australian site:
1. Close the door window completely.
2. Press the reset switch and open the door window completely.
3. Release the reset switch. Ensure the reset switch has returned to the original position, and then close the door window completely.
4. The limit switch is now reset.
*Be sure to manually open or close the door window (Do not use the automatic open-close procedure).
When all is done, test the anti-pinch function by holding a piece of wood in the way of the closing window. Before closing up it would be a good idea to lightly lubricate the metal clips with petroleum jelly.
Brilliant fix. Didn't know that the reset button is hidden down there until you showed it. Crisis averted.
Brilliant! 30 seconds and it's now working perfectly 👍👍😁😁
Wow. I did not know there was a pinch guard. The T30 is more advanced than I expected lol
Thank you for the easy fix for my Xtrail 2005 LE
Found also another post holding auto button up after window closed 10 seconds works also just tried it thanks your post anyway..
I'll be going out tomorrow and doing this. thanks. just bought 1 and its doing this
Didn't wait till tomorrow hahaha. went out and sorted it. took all of 2 mins
Thanks, just done my window, was like this when i got mine. Holding the reset button was temperamental, which I had end up doing it around 3 times to get correct.
Not sure exactly what I did but after watching your vid and removing the panel as you did, a wiggle of the screwdriver managed to sort. Untold stress avoided. Cheers
Thank you!!! Worked perfectly!!!
Thanks a lot. It worked for me.
Thanks for this video 👍🏼
Hi - does this fix work for a rear window?
👍🏻 work with 2004 x-trail
Drivers seat belt warning light dash won't go out when plugging seat belt into stalk...but will go out if I plug in passenger seatbelt into passenger seat belt stalk...any tho ghts on rectifying problem appreciate...
Jon Lennon never heard of that !. I will look at the wiring diagram the weekend.
scruffymid ....cheers I think it's happened before andcagian resolved itself after car was parked up after period time or next day?...strange?... Like your vids thanks...gremlins hehe!
I got this suv model, my driver's side door window goes so slow going up and when it rains it's even slower or stops 20% up, i ended up having to pull it up while using the botton.
Exact same thing for me yesterday and it was -19c, very cold. Had to get out of car and pull window, while using button.
Apply some silicon spray to the guides
would I do the same for the back windows?
good question
My passenger power window doesn't work when I press the switch. But works from the driver side any suggestions ?
I think they are linked directly together so is likely the switch itself. The only way to check is to take the switch out and test it, but if you can get a cheap switch on eBay you could swap it and hope it works. I have the wiring diagram somewhere, will try and find it tomorrow.
All our passenger windows go down with their own switch, but not up. Have to get driver to put up. Any help would be great. Not convinced all switchers are worn, happened about 12 months after getting car.
@@grumblesaw4415 i had the same problem now, did you solve it?
Cheers tip will try..
Update light gone out after car sitting outside 2 hours weird?..
Bos cara pasang ke socet power window y kaya gini gimana lepas
Hello, my back passenger window doesnt work itself, i tried to fix it myself but now it doesnt work either from driver switch...i checked there is no blown fuse, there is electricity at the switch, but it still wont work, all other windows are okay...any suggestions would be helpful
Have the same problem.
Excellente merci beaucoup
Mala traducción
❤terimakasih
Will this work on 2011 model?
They changed the model in 2007 / 2008 but I don't know if it was a facelift only. Unfortunately the only way to know is to take the handle or door panel off and look for the same motor system.
Tex frend !
The pet store
En español
Activa los subtítulos en español
Perfect mate and great job.
That worked perfectly!! Thank you