as a former bodyshop painter if you're going to paint your own car don't do long strokes you will get too much dry paint which will cause it to look terrible.. for example if you're going to paint a fender only paint the fender then move on to one door at time hoods can be a little tricky so you start on side then over lap as you paint the other half same way top roof and trunk.. as well as bumpers.. spay 6 inches away using side to side sweeping..
Claybar isn’t going to remove orange peel wet sanding and buffing would remove the orange peel and restore the shine clay baring is equivalent to taking rubber to some thing shiny and going at it until it fades
Can you use a clay bar to pull out embedded trash in the paint, a clay bar is not used to make paint fade. I don’t know who told you this, but they’re wrong. You are correct on wet sanding and buffing to remove orange peel.
To add a tip about using any type of spray painting, but specifically to aid in painting your car, practice with a cheap can first and really take it how distance effect how it stick. If it pools up, if it’s spread thin, or if your maximizing your usage of paint per swipe. Get an idea how wind if any is present affects the spray, and make SURE to let it dry it an effect the costs a lot if it pools, which If you care about the overall look, and are doing this for the first time, be careful of.
I just order a case of six on Amazon for $89 I also ordered a case of Rust-Oleum Turbo primer same price. I'm keeping my fingers crossed that my little brother will let me paint his G6.
Video is okey but what you should have done was do a light coat over the whole car first wait 15mins depending on temperature of where your spraying than spray another coat but heavier and wait 20mins than spray a thick coat from now on but always wait in between coats than once you done about 5 coats leave it for the day come back next day lightly sand car with 400 grit to fix stuff ups clean it than do 1 more coat of what you just sprayed than wait again and than start with 2k clear coat but spray just as heavy as you have through the whole job wait and repeat for 6 coats let that dry for a week than wet sand the whole car to get orange peel off and other reason for so many coats of colour and clear is so when you wet sand and buff you don’t burn through the paint and still have plenty of clear coat to last you years
Car has orange peels , you need to wet sand it with 2000 and 3000 grid sandpaper , then polish it , after that wax it , it will look great and shiny , ✌️ peace
I messed up painting my 95 Lexus Ls400 glossy black.I used Rustoleum Ultra Glossy Black and I spray painted the whole left side and it came out horrible.Tiger stripes, not shiny, heavy and light spots.I was dissapointed but I didn't give up.I bought a can of Turbo glossy black at Home Depot.I sanded the side of the car I was going to paint.Cleaned it.Painters taped it off.I sprayed it with turbo and this stuff is idiot proof.The paint looks even and shiny.I did learn what orange peel is, got that but I don't care, it looks better than it did.In 3 days I'm going to wax and buff it.
When you clay bar a vehicle you need a spray wax or water as a barrier to reduce the amount of scratches from the clay. After clay bar you need to buff the vehicle.
Your too far from the surface it’s not even sticking the over spray. Also, did you know German cars have a special paint mixture? That’s a secret that’s why so expensive you took BMW with class quality paint and took a spray into it. This is a good house, not to video.
Was about to watch this video but not into starting a video with a guy whining that his viewers don't sub. I'm out. Lol. Not into ppl begging for me to sub.
as a former bodyshop painter
if you're going to paint your own car don't do long strokes you will get too much dry paint which will cause it to look terrible.. for example if you're going to paint a fender only paint the fender then move on to one door at time hoods can be a little tricky so you start on side then over lap as you paint the other half same way top roof and trunk.. as well as bumpers.. spay 6 inches away using side to side sweeping..
Great comment
This is a novice paint job man nothing special, shit lays out nice either way, its rattle can doesn’t dry as quick as hvlp
You'd have to get 2K clear to get the glossly look.
You can remove the wide nozzle and put iT on the smaller cans for a better spray surface
my OCD just went into over drive watching this video. omg man u are KILLING me the way you paint.
That’s the point it worked either way.
Claybar isn’t going to remove orange peel wet sanding and buffing would remove the orange peel and restore the shine clay baring is equivalent to taking rubber to some thing shiny and going at it until it fades
Can you use a clay bar to pull out embedded trash in the paint, a clay bar is not used to make paint fade. I don’t know who told you this, but they’re wrong. You are correct on wet sanding and buffing to remove orange peel.
That's not even orange peel, that's the paint lifting, which means he didn't clean it properly, or something wasn't compatible.
I would recommend wet sanding and buffing the paint instead of a claybar. It wont take away the gloss finish either
You always use a clay bar on a car, a clay bar is designed to remove trash in the paint it’s not meant to buff or make something shiny.
To add a tip about using any type of spray painting, but specifically to aid in painting your car, practice with a cheap can first and really take it how distance effect how it stick. If it pools up, if it’s spread thin, or if your maximizing your usage of paint per swipe. Get an idea how wind if any is present affects the spray, and make SURE to let it dry it an effect the costs a lot if it pools, which If you care about the overall look, and are doing this for the first time, be careful of.
Clear coat isn’t just for looks it’s to protect the paint
You wet sand it, then put a clear on it, and buff it. Mirror shine.
New sub here! Look forward to more painting with Rustoleum turbo cans!
It looks good man I'm going to try this out on my truck
Love seeing the dodge intrepid.. my family had like 20 years ago..
U R hilarious 😂
Paint looks great !
Good Job young man ‼️ 👋👋👋👋👋
I love this turbo painting
Remove orange peel with wet sanding. Then apply clear coat and check how it shows.
is that turbo can solvent or water based?
Does not look bad but really need to apply 2k clear it would look awesome
Hi does it scratch off the car easy
Why would you clay bar it instead of wet sanding it
Awesome! I’m thinking about doing the same thing with my 1990 car. In black too.
Great video man. New sub here. Car looks good. Just landed a few cans to do my Trans Am. Fingers crossed it comes out as good as yours.
I just order a case of six on Amazon for $89 I also ordered a case of Rust-Oleum Turbo primer same price. I'm keeping my fingers crossed that my little brother will let me paint his G6.
Frigging love your commentary!!! 🤣🤣😂😂
With Rust-Oleum you cant dust on the paint. Loke you did. That why got type cracking ,you thought that is orange peel.
Video is okey but what you should have done was do a light coat over the whole car first wait 15mins depending on temperature of where your spraying than spray another coat but heavier and wait 20mins than spray a thick coat from now on but always wait in between coats than once you done about 5 coats leave it for the day come back next day lightly sand car with 400 grit to fix stuff ups clean it than do 1 more coat of what you just sprayed than wait again and than start with 2k clear coat but spray just as heavy as you have through the whole job wait and repeat for 6 coats let that dry for a week than wet sand the whole car to get orange peel off and other reason for so many coats of colour and clear is so when you wet sand and buff you don’t burn through the paint and still have plenty of clear coat to last you years
Brutal
Well done oil based paint needs to dry alot between coats otherwise it will crinkle up 10/10 though 👍
How many cans?
For at least 3 full coverage coats you’ll need at least 10 cans.
Wetsand and Clearwater would help you out a whole lot
I cannot find black turbo paint anywhere!!
Car has orange peels , you need to wet sand it with 2000 and 3000 grid sandpaper , then polish it , after that wax it , it will look great and shiny , ✌️ peace
What polish and wax should I use for a job like this?
I messed up painting my 95 Lexus Ls400 glossy black.I used Rustoleum Ultra Glossy Black and I spray painted the whole left side and it came out horrible.Tiger stripes, not shiny, heavy and light spots.I was dissapointed but I didn't give up.I bought a can of Turbo glossy black at Home Depot.I sanded the side of the car I was going to paint.Cleaned it.Painters taped it off.I sprayed it with turbo and this stuff is idiot proof.The paint looks even and shiny.I did learn what orange peel is, got that but I don't care, it looks better than it did.In 3 days I'm going to wax and buff it.
Omg I almost cry listening to his voice 😭😂😂😂😂😂😂
When you spray paint a car next time you need too move for more fluently and not a sporadic and small spots will make it come out so much better
Thats not orange peel thats wrinkling and paint lifting. Normally bc it was cleaned properly before painting. But could be other reasons.
I wish I could get some in the uk. I need 4 tins in gloss white.
Claying a car will dull paint. It needs a polish afterwards to bring the shine back
You get tiger strips on the bmw cause you literally had horrible stroke patterns 😂
If the shiny , not there anymore, buy some 2k clear coat spray
I used those turbo cans and they not the best regular size cans work better lighter spray color match paint youll get a better look.
I wish all reviews were like this lol
Black is the worst color to paint with these cans , I found it’s the color that fades the worst, red and white where the best ones I’ve ever used
After seeing the results, I’m looking to spend hundreds of dollars on professional equipment.
Earned a sub. Shit just one funny ass review
When you clay bar a vehicle you need a spray wax or water as a barrier to reduce the amount of scratches from the clay. After clay bar you need to buff the vehicle.
Also wet sand it then compound and then wax is what I should of said lol looks ok tho not bad of a job
About get fated in Les than a year
Compound it .. and it’ll come back the shine that is ..
Jesus no wonder it cost you 12 cans you spraying it wrong as hell
He said he wasn’t a professional sprayer but it came out nice , show him love 💕 before you attempt to demolish his DIY PROJECT !
Good job papa 💯🫡
Chemical reaction
Gotta sand it wash it and Prep it then after wet sand it and then wax it and it will look bad ass
Clear coat it with 2k clear
And it will last years
Sheesh
Your too far from the surface it’s not even sticking the over spray. Also, did you know German cars have a special paint mixture? That’s a secret that’s why so expensive you took BMW with class quality paint and took a spray into it. This is a good house, not to video.
Was about to watch this video but not into starting a video with a guy whining that his viewers don't sub. I'm out. Lol. Not into ppl begging for me to sub.
You can’t paint. This is operator error
Your cool bro I like the way you talk about shit
Sand the car
Jesus painted really bad and that car looks over painted
Youre spraying techniques are terrible