G37x AWD to RWD conversion, switch install.

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 42

  • @Rushfan102
    @Rushfan102 4 ปีที่แล้ว +17

    Just want to say, if you do this and AWD wont engage again, YOU BLEW A FUSE, so check your fuse box and replace it. When switching between AWD and RWD, turn the vehicle off first, it will prevent you from blowing a fuse (some people still did after but its rare). A lot of people cut the orange wire and it works for them, but for some it will blow a fuse, I read on myg37 that the dark GREEN wire (ground) is a better one to tap into, as it doesn't blow fuses as often. Not quite sure if G35 and G37 are the same in that manner. Other than that, great video!

    • @ryang3751
      @ryang3751  4 ปีที่แล้ว

      Rush Designs thanks for the comment. I haven’t heard that and I’ve never blown the fuse.

    • @griddyyyyyy
      @griddyyyyyy ปีที่แล้ว

      which fuse would it blow i think i blew one

    • @androgamer7233
      @androgamer7233 9 หลายเดือนก่อน

      I just exploded one and I have no idea what it is.

    • @cameronvannelli
      @cameronvannelli 7 วันที่ผ่านมา

      Ets 10 amp in your battery box

  • @huptywhips6705
    @huptywhips6705 3 หลายเดือนก่อน

    Disable the gyro sensor under the cup holder you can do standing burnouts

  • @Christianswogger
    @Christianswogger 2 ปีที่แล้ว

    Definitely doing this after I do LSD swap

  • @Tinnguyentk
    @Tinnguyentk 6 ปีที่แล้ว +3

    I did just like you did on my 2015 q60. It turned to rwd but cant switch back to awd. Anything thats you know to help me to get back to awd?

    • @ryang3751
      @ryang3751  6 ปีที่แล้ว +2

      Eli Nguyen you only switch it while the car is off. If that still doesn’t work maybe the switch is bad. I don’t know besides that.

    • @angelbluerider9588
      @angelbluerider9588 6 ปีที่แล้ว

      did you ever get your q60 back to AWD?

    • @Rushfan102
      @Rushfan102 5 ปีที่แล้ว +5

      You blew a fuse most likely

  • @kevinabriola9290
    @kevinabriola9290 4 ปีที่แล้ว +1

    Hey I was wondering what the third prong is for so like what two prongs are you using?

  • @newphone3594
    @newphone3594 5 ปีที่แล้ว +1

    Has this any damage to your car?

  • @antp1421
    @antp1421 4 ปีที่แล้ว

    So just tap.omto that orange wire? That part wasn't really clear to see?. I have a 2010 g37x sedan

    • @ryang3751
      @ryang3751  4 ปีที่แล้ว

      A Jay you cut it and install the switch across it.

  • @dahouligan1148
    @dahouligan1148 2 ปีที่แล้ว

    does this work on the g37x as well? cuz you have a g37xs right?

    • @ryang3751
      @ryang3751  2 ปีที่แล้ว

      They are the same

  • @asgddgg4280
    @asgddgg4280 5 ปีที่แล้ว

    I had a G37s May come as a dumb question but why switch to rwd? I thought awd with the 3.7 engine has a better power band but I’ve never experienced an awd G37s could you tell me the downfalls before I purchase one lmao

    • @ryang3751
      @ryang3751  5 ปีที่แล้ว

      Asg ddgg the awd is a heavier car but the RWD is very traction limited.
      I installed this switch because it was easy and lets you do burn outs. As far a power band, its the same

  • @itsromeo2958
    @itsromeo2958 6 ปีที่แล้ว +3

    How to wire the switch

  • @samuelallard1228
    @samuelallard1228 4 ปีที่แล้ว

    Is it the same process for g35x 2008? And the same wired (orange)? Thank you great vid!

    • @ryang3751
      @ryang3751  4 ปีที่แล้ว

      Don’t know, sorry

    • @samuelallard1228
      @samuelallard1228 4 ปีที่แล้ว

      @@ryang3751 okay thanks

    • @Rleader0933
      @Rleader0933 2 ปีที่แล้ว

      You blew a fuse check your fuse if that’s still good it’s the switch itself,check your connections

  • @LeemWills
    @LeemWills 3 ปีที่แล้ว

    U do no the car is rwd until the wheel slips right .

    • @kyleninneman3182
      @kyleninneman3182 2 ปีที่แล้ว

      He literally says this in the video lmao. The point of this is to keep the power from going to the front even under slippage.

  • @angelbluerider9588
    @angelbluerider9588 6 ปีที่แล้ว

    how long you had this mod for. did it ever messed up your car?

    • @ryang3751
      @ryang3751  6 ปีที่แล้ว +1

      Ach Cru i ran it for a few weeks one time with no issues but besides that i only use it maybe like 1 time a month.
      I don’t know what will happen if you keep it on forever.

    • @crisscross3422
      @crisscross3422 5 ปีที่แล้ว

      in my g35x 2005 i Just popped the fuse out in the summer and I didnt have any problems while cruising for 2 months but i was tired of always pulling out the fuse so i was about to put a switch on

    • @taylon5200
      @taylon5200 4 ปีที่แล้ว

      @@crisscross3422 did you pull the ets fuse? That's under the hood right? Have the same car. I just keep hearing I have to pull the stop lamp fuse

  • @jaydonfaucett
    @jaydonfaucett 5 ปีที่แล้ว +1

    What are the colors of the wires you ran into the switch you say the orange but what is the other?

    • @ryang3751
      @ryang3751  5 ปีที่แล้ว

      Jaydon Faucett orange is the only color. The other wire is only to extend to reach the switch.

    • @jaydonfaucett
      @jaydonfaucett 5 ปีที่แล้ว

      From the switch there is only the extended wire ?

    • @jakesterhner713
      @jakesterhner713 4 ปีที่แล้ว +2

      I know I'm late, but figured it may help someone else. You cut the orange wire, so there's 2 orange ends. Wire each one to each side of the switch. Then it acts like a light switch. On = AWD, Off = RWD.

    • @FrAndR0iD
      @FrAndR0iD 4 ปีที่แล้ว

      @@jakesterhner713 did you try that?? does it work?

  • @jakesterhner713
    @jakesterhner713 4 ปีที่แล้ว

    What year is your G37x?

    • @ryang3751
      @ryang3751  4 ปีที่แล้ว

      Jake Sterhner 2010

    • @jakesterhner713
      @jakesterhner713 4 ปีที่แล้ว

      @@ryang3751 Appreciate it, Ryan. Great vid!