Reviving A Stuck & Rusted Skateboard Bearing - Complete Teardown & Rebuild
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- This is how I've always cleaned and reused older skate bearings. This method is for bearings with removable shields and Delrin/Teflon crowns. Besure to properly dry and lube bearing after cleaning, as stated in the video, if you skate a bearing right after this process it has a better chance of getting completely dry and falling into that good bearing groove where it just works. With older bearings always keep a few handy because they are of course more prone to blowing out. Hope this helps somebody!
1. Disassemble
2. Put in vinegar 6 hours
3. Reassemble 1/2
4. Put grease in there
5. Reassemble 2/2
i need to save this comment
Do this remove rust?
@@addamskiii1796 no
I found you're method reassembly a real saver for me as I was struggling to get the bearings all back together. Cheers.
Yes! only tutorial explaining this. Rest be like: don't bother going this far. Well.. than there is you and me and the likes :D
Heck yeah! Super satisfying to do and then notice the difference on the next session. Also the process is very meditative? Little things like that, and flipping rotating wheels so they wear evenly, greasing the pivot cup and bushing ends so they don't creak, all totally fun parts of skateboarding that people usually don't give much attention to but are satisfying routine type things
That just saved me
My method
1.remove 1 shield
2.soak overnight in vinegar
3.remove bearing from vinegar and lube with 3 in 1 oil
4.insert to skateboard tighten as much as possible
5.rotate the wheel until it frees up
Using a good gun oil works great for removing rust.
I usually do that then after I use dawn dish soap and put it into the back side of the bearing and add just a little water and spin it until it starts feeling smooth.then I take the bearing under a water faucet running all the way and I spin the bearing until I see no more suds.i then shake all the excess water out then put the bearing into a bowl of 99% isopropyl alcohol for a few hours to degrease and make sure when I remove from liquid no trace of water is in the race.i run older bearings unlubed but otherwise would add bones speed cream after then boom you have a restored bearing
I like your nails
A lot of work on 32 bearings but better then buying a new set.
*56 bearings (8 housings with 7 balls per housing)
I found a hack. I put autosol metal polish leaving it in the bearings to polish and grind out the rust. Later cleaning it out.
So far it works out saving stuck and rusted bearings.
Also it removes and polishes out the bumps caused by the rust and makes it spin better.
Try it and let me know how it works out.
thank you so much bro
I realized this is gonna be very hard to do with balls that are the size of a needle point after I took it all apart
Mine is 100% seized up
I lost it as soon as I saw the red nail polish 😂💀
What's wrong with nail polish 🤨
🤣🤣🤣
Yeah that's all I got to as well
Lmao.
some rust remover and oil will not hurt either but good video otherwise
But if u use something like wd-40 and not skate lube you will attract more dirt
love your nails 🤍
Very helpful
Waz up dude 😎
Thats a girl
Or just buy spitfire cheap shots
Nice nails dude
Thanks Brother! Took me 20 minutes to get it back together but it works just fine now. Right On..
*What is the Gospel?*
The true gospel is the good news that God saves sinners. Man is by nature sinful and separated from God with no hope of remedying that situation. But God, by His power, provided the means of man’s redemption in the death, burial, and resurrection of the Savior, Jesus Christ.
Ephesians 2:8-9
For it is by grace you have been saved through faith. And this is not your own doing; it is the gift of GOD, not a result of works, so that no one may boast.
Romans 10:9
9 because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved.
JESUS CHRIST can come anytime.
REPENT OF YOUR SINS Just Believe ❤️ Love you and GOD BLESS
what is wrong with you lol
The guy puts up a video about cleaning skate bearings and you think “oh damn perfect place to try to spread my ideology” what’s ur issue man literally no body saying anything for or against ur ideas. I doubt there’s any god that thinks it’s a sin to skate or paint ur nails or rub metal balls with some lube till the bearing busts it’s load. So yeah I don’t think this is right place for ur speech. But wat Eva
Thanks plz reply
Literally first try, lmao!
Why haven’t I seen this video until just now.. thanks for the vidja!
why is this ladies voice so deep?
Commited!
you a girl brothaa?
Does it matter? :DD
Microbios75 absolutely
@@Ken-uz2ds um no ❤️
Lmaoo
It's nail polish stop crying over paint and go outside bub