Done my install today thanks for the helpful video. The power is just the red and brown wire. Red for live. Brown to black for ground. No need for the grey wire
Very good job. Just my own personal pet peeve is the edge of the lights are slightly brighter than the rest of the tube lighting...could be rectified with a better quality led cable
hey there, sure so this was done so that the main module would only activate when the headlights are turned on, if you look at the later versions of this car install I have done with the symphony kits, you will see that I do it with the cig live only as that lighting looks good day or night. You can see that video here: th-cam.com/video/pZhO0rm80Y0/w-d-xo.html
Bro i took off my door panel and i cant put it bsck on properly, please explain how bro or do a video because its just hanging off right noe i dont know what to do
Thanks for all your help with this! Just to give you context. I have a 2018 Audi A3 and it has interior lights. I have been taping into the 12V socket like your videos says but it still gives constant power. I am assuming that I have it wired up to the two ticker wires and I have left the middle thin wire alone (the one for the remote). Is it safe to use the thing wire as the negative for the led lights? Would that put it in sync with the other OE interior lights in the car?
Hello, really aweesome looking. I am thinking to do the same so let me ask you when it comes to the dashboard, specificly runing the conecting wires from the leds behind the AC controles and switches to the lighter power what is it like? Is it possible once I put the led's on the dash can I remove just the upper switch (drive select, esp buttons etc) and somehow push the conecting wire so it ends upe close to the lighter or will it need to dissassemble most of the center consloe (glove box, knee panels) you know so I can get the conecting wire to the lighter, for power? Thanks in advance!
@@mrgcc cheers. I used the wiring for the window motor on my Avensis. In particular a wire that goes from the window motor to the switch (powers the little LED) but in one rear door that wire stopped delivering power, LED is out on the switch but everything else works fine (window / switch / motor) and as expected. Can't work out how to fix it, and I'm worried my other doors will do the same. The LED ambient lights work on all the other doors but one has shorted by the sound of it. Any idea how to fix that?
Done my install today thanks for the helpful video. The power is just the red and brown wire. Red for live. Brown to black for ground. No need for the grey wire
So the black wire goes to the brown and the red wire goes to the red
i don’t understand is that correct
But does the led strip just turn on when you turn on the lights or as soon as you start the engine ?
How did you route the wires in the dash?
Even on camera hella fire thank you bro def utilizing this for my s3 great vid subbing
Amazing job my friend, I'll be booking my Audi S3 in soon 😮
Very good job. Just my own personal pet peeve is the edge of the lights are slightly brighter than the rest of the tube lighting...could be rectified with a better quality led cable
It’s because there fibre optic cables not led
@@Amir.253 makes sense...still looks very good
On the center consol cigarette port wires what dose the grey wire connect to??
3:22 hey, sorry but I don’t understand why do you cut into the grey and red wire ? 🤔 is it not enough just to cut the grey and the brown wire ?
hey there, sure so this was done so that the main module would only activate when the headlights are turned on, if you look at the later versions of this car install I have done with the symphony kits, you will see that I do it with the cig live only as that lighting looks good day or night.
You can see that video here:
th-cam.com/video/pZhO0rm80Y0/w-d-xo.html
Mashallah subhanallah very nice 👍 video Mr Gcc keep it up bro 😎 lots of love ❤️ from Naqib Glasgow Scotland 🏴🇬🇧🏴🇵🇰
Thank you so much bro. Hope all is well over in Scotland
@@mrgcc Alhumdillah I’m fine bro 😎
Good to hear bro, thanks for always supporting me and the channel!
@@mrgcc Your welcome bro 😎 anytime
Hi bro I got the kit, but doesn’t tell me what app to get, please help on telling me what app to get
Salam bro, I own an Audi a3 8V 2013. How much would it cost to have this done to it and where abouts are you based?
What connector did you use for the wiring
Where did you get the switched 12v from the doors?
Bro i took off my door panel and i cant put it bsck on properly, please explain how bro or do a video because its just hanging off right noe i dont know what to do
😂 fuck man
Hi,is the colour scuba blue?
is there a way to install these so it only turns on at night?
Yes it can be done. I have done it for a few cars
@@mrgcc How exactly did you do it. I am unfortunately from California, so I wont be able to bring my car in to you haha
Thanks for all your help with this! Just to give you context. I have a 2018 Audi A3 and it has interior lights. I have been taping into the 12V socket like your videos says but it still gives constant power. I am assuming that I have it wired up to the two ticker wires and I have left the middle thin wire alone (the one for the remote). Is it safe to use the thing wire as the negative for the led lights? Would that put it in sync with the other OE interior lights in the car?
@@mrgcc can you explain how pleaseeeeee
What would something like this cost
from where im taking the + and - to the dash?
Might void warranty. Any similar without using car electrics?
Scuba blue is the color, mate
How much would you charge for a job like this ?
Hello, really aweesome looking.
I am thinking to do the same so let me ask you when it comes to the dashboard, specificly runing the conecting wires from the leds behind the AC controles and switches to the lighter power what is it like?
Is it possible once I put the led's on the dash can I remove just the upper switch (drive select, esp buttons etc) and somehow push the conecting wire so it ends upe close to the lighter or will it need to dissassemble most of the center consloe (glove box, knee panels) you know so I can get the conecting wire to the lighter, for power?
Thanks in advance!
Amazing bro! Mashallah! 💪
Hiya what kit do you use
Hi there, I put a link for it in the description but here it is for you as well: ebay.us/7onHzm
What’s the app brother
What wires do you usually use for power?
For the doors or interior mate? I tried to show them all in the video.
@@mrgcc cheers. I used the wiring for the window motor on my Avensis. In particular a wire that goes from the window motor to the switch (powers the little LED) but in one rear door that wire stopped delivering power, LED is out on the switch but everything else works fine (window / switch / motor) and as expected. Can't work out how to fix it, and I'm worried my other doors will do the same. The LED ambient lights work on all the other doors but one has shorted by the sound of it. Any idea how to fix that?
@@mrgcc hey can i get your phone number and the address please 🙏
For the center consol u added 3 connecter but dosnt the moduel ambient only have 2 wires
@@SameerKhan-pz7df I am also confused on this...would be could if anyone could shed some light please.
What is connected to the grey wire ?
How much do you charge for this?
Can you message me on instagram to discuss further?
@@mrgcc I have already @fortified_civilian
Size?
Le manz blue
Love Jesus Christ ❤
Why using optical led?!!! that look's horribel and aftermarket. New symphony led trim are much better....
How much for a s3 69 plate? I’ve messaged on insta