When u are tipping the two bales of silage u should drop the two bales on the ground then pull the ram and lifted up your arms and back up the same time u won’t be putting any stress on the ram then. :)
Great video, great to see you are washing all your good machinery for the winter. Made bales on October 22nd last year, bales were fine when I opened them but would go off colour after 24 hours, so I started giving them just enough for the day, they are it all anyway 👍
We stopped tipping the bales up on their end 3 years ago. We set them the same way we lift them. Far easier and faster and come winter, they are easier to lift also. Everyone around us is doing the same also even when stacking up to 5 high. No need for hydraulic or the old pulling of rope job. People are now buying the lifters without the tip over option. Saves a lot of money.
Great video Gerry. Good to see that the ground is holding up well me and at friend were drawing in bales yesterday and the ground was no where near as hard or as well as ur ground the fella baling it got stuck 2 times 👌
Nice bit o additional winter forage there👍 yeh remember back in the day stacking bales always loved it especially if u cud get the front o the tractor high in the air 🤔😂😂 good thing to grease equipment after power washin it Gerry kinna makes sure there's no water trapped in any o the bearins 💪💪
Yo Gerry!!! Jaze buddy 9/10 bales to the acre is nuttin to sniff at all at all!!!! Looks great quality stuff for the time a year!! Pmsl at "THE STIG" aka Gerry Snr on the Brown!!! By god lad he gives her the pokey stick too to be fair to him!!! Christ at one stage he must have been on the half pedal to steer her round the gap lol!!!!!!!! Nice looking setup bailing too.....not a 10 series???? Great to see the owld legends still making a few quid!!!! Anyhoo, mind yereselves and stay cool boss!!!!!!!!!!!
Nice to see the old db putting a good turn in 👍. Still surprised you managed to get it dry... I'm thinking of growing rice but think it might be too wet for it 😂😂
good crop of grass there ,, dont fault da brown only as good as da man in da seat ,,ive hauled bales with da old 35 massey spent most me time in reverse gear ,,lol..its not all about shiny bonnets and big horse power,,big money payments involved if thats da road ya go down,,
Thomas Mc kevitt grills good man Thomas. Where were you. You could have been on the video . 😊👍 Show your dad. Tell him I’m making him famous. 😂 the deere and the mchale looked well.
Hi Gerry, thanks again for all the great videos. Just wondering what sort of cattle clippers would u recommend for doing cattle s backs and tails , I m using one that has A 9 blades but they don’t last long with dirty cattle ,
These are what I use www.fanevalleystores.com/categories/clipping-shearing/clippers/machines/products/27101/Heiniger-Xtra-Sheep-Clipper Could clip 100/150 cattle. No issue. Just keep them oiled.
Brian Delaney 100/150 cattle per blade. usually once they kept oiled when using them. Have a little tub with oil in it and between each animal dip the blade in and keep them lubricated
Irish Green Pastures not really. It’s one of only a few songs I have to pop on. I’d rather use some main stream kinda music but TH-cam copyright your videos then
@@gerry6420 you can get songs from the audio library an all you have to do is copy an paste their description into yours and you'll have no copyright problems
@@gerry6420 We make all our silage (3500 bales per year) using two/three tractors with front and rear handlers. Dont use any trailers. Think it works really well. obviously depends on the distance and whether there is much road work. Fleming handlers are good but maybe could be a bit stronger - bales are getting bigger and bigger. Anyway, all the best!
SonnyJim 's hobbies and garden life. This time of year it will be very slow. Wouldn’t expect much grown now until spring. But u never know. If you got a few milf weeks id green up again
Fendtforlife funny that how I have Gerry on snapchat and have sent him photos and videos of me carting bales saying our MF 390 is better than their 2850😂
When u are tipping the two bales of silage u should drop the two bales on the ground then pull the ram and lifted up your arms and back up the same time u won’t be putting any stress on the ram then. :)
Fergal Keane I do drop them down.99 times out of 100. U must be looking at that 1 time 😂
Great video, great to see you are washing all your good machinery for the winter. Made bales on October 22nd last year, bales were fine when I opened them but would go off colour after 24 hours, so I started giving them just enough for the day, they are it all anyway 👍
John Kelly yes these probably will go off but quicker too. I’ll feed them the same. Just as they need them
Good to see there's nothing wrong with the Brown's hydraulic's!!! Nice one Gerry 😎😎
Stephanie Robinson no bother to the brown. More weights needed on the front though 😬
We stopped tipping the bales up on their end 3 years ago. We set them the same way we lift them. Far easier and faster and come winter, they are easier to lift also. Everyone around us is doing the same also even when stacking up to 5 high. No need for hydraulic or the old pulling of rope job. People are now buying the lifters without the tip over option. Saves a lot of money.
Mikey Sky yes I’ve stacked them that way too it works well
Great video Gerry. Good to see that the ground is holding up well me and at friend were drawing in bales yesterday and the ground was no where near as hard or as well as ur ground the fella baling it got stuck 2 times 👌
Aidan Stokes yes we have ground like that too. It’s the time of year for that
Nice bit o additional winter forage there👍 yeh remember back in the day stacking bales always loved it especially if u cud get the front o the tractor high in the air 🤔😂😂 good thing to grease equipment after power washin it Gerry kinna makes sure there's no water trapped in any o the bearins 💪💪
Bob Paterson exactly. 😬👍
Pissing rain in cork you got lucky! rained all night too
The David brown and the 6930 are 2 nice tractors
Gerry senior playing chicken with baler at 6min 30👍😳
You Tube he was a bit 😂
Fantastic you got it done good catch sir
Db did a great job looked really nice grass dryer than I thought it would be
Well done👍👍
Antony farming yes worked out well. Suprised how dry the grass was too. It would make nice stuff.
Handy few bales only one way to get bale out of field that's with a bale handler had to do that up the brown 💪
Patrick Oconnell 👌😬👍
Yo Gerry!!!
Jaze buddy 9/10 bales to the acre is nuttin to sniff at all at all!!!! Looks great quality stuff for the time a year!! Pmsl at "THE STIG" aka Gerry Snr on the Brown!!! By god lad he gives her the pokey stick too to be fair to him!!! Christ at one stage he must have been on the half pedal to steer her round the gap lol!!!!!!!! Nice looking setup bailing too.....not a 10 series???? Great to see the owld legends still making a few quid!!!! Anyhoo, mind yereselves and stay cool boss!!!!!!!!!!!
Maurice Cahill that’s the best comment I read in ages. Had me in stiches. Half pedal, pokey stick. Legend. Thanks buddy 😂👍
Jerry you should try using film on film instead of net if it's fitted to that fusion. Used this year and find great job.
John O'Brien yes I’ve heard it’s great job. Hear it’s great for when handling bales. Great protection
Hope Gerry senior was pairing them up for you, save wearing out a cross shaft on the 6930
Matthew Craig yes he stacked them up. Saved a lot time too. I was able to trace faster with 2 then him with 1 . Made sense to keep be drawing
Nice to see the old db putting a good turn in 👍. Still surprised you managed to get it dry... I'm thinking of growing rice but think it might be too wet for it 😂😂
Casto great.... another patty field one 😂
😂 I was meaning getting the grass dry 😂.
Great video as always Gerry
Thanks tim
Great video
james McLean 7810 thanks james
good crop of grass there ,, dont fault da brown only as good as da man in da seat ,,ive hauled bales with da old 35 massey spent most me time in reverse gear ,,lol..its not all about shiny bonnets and big horse power,,big money payments involved if thats da road ya go down,,
Gordon Anderson yep very true. Older machines are just as good
@@gerry6420 lol the pattie fields was a funny one
Tractor on the baler sounds great, as always Gerry thanks for the videos.
Michael Canny thanks Michael. Glad you enjoy the videos 👍😬
Nice video gerry
Calum Bourke thanks calum
Well Gerry great vid that my dad diving the baler
Thomas Mc kevitt grills good man Thomas. Where were you. You could have been on the video . 😊👍 Show your dad. Tell him I’m making him famous. 😂 the deere and the mchale looked well.
Thanks
👍🏻👍🏻
👍🏻👍🏻
Hi Gerry, thanks again for all the great videos. Just wondering what sort of cattle clippers would u recommend for doing cattle s backs and tails , I m using one that has A 9 blades but they don’t last long with dirty cattle ,
These are what I use
www.fanevalleystores.com/categories/clipping-shearing/clippers/machines/products/27101/Heiniger-Xtra-Sheep-Clipper
Could clip 100/150 cattle. No issue. Just keep them oiled.
Sound did that Gerry, roughly how many cattle would u get out of a set of blades
Brian Delaney 100/150 cattle per blade. usually once they kept oiled when using them. Have a little tub with oil in it and between each animal dip the blade in and keep them lubricated
Great video. Where did u get that bin in the corner of ur cab?👍
Cheers thanks Gerry
Thx for the video
Thanks for watching. Glad your enjoying videos
Ryt lok of bales 👍
The New Holland Farmer yes it bulked well
You must really love that song you always play😂
Irish Green Pastures not really. It’s one of only a few songs I have to pop on. I’d rather use some main stream kinda music but TH-cam copyright your videos then
@@gerry6420 you can get songs from the audio library an all you have to do is copy an paste their description into yours and you'll have no copyright problems
I quite like that song. It's practically Gerry's theme tune at this stage!
Not fancy getting a bale handler on the front linkage as well?
Lewis Strong yes thought about it. Speed the job up alot
@@gerry6420 We make all our silage (3500 bales per year) using two/three tractors with front and rear handlers. Dont use any trailers. Think it works really well. obviously depends on the distance and whether there is much road work. Fleming handlers are good but maybe could be a bit stronger - bales are getting bigger and bigger. Anyway, all the best!
How long does it take for the grass regrow to grazing height after being cut
SonnyJim 's hobbies and garden life. This time of year it will be very slow. Wouldn’t expect much grown now until spring. But u never know. If you got a few milf weeks id green up again
My nebour has a 996 when ever is drawing in bales he puts 4 bags of sand on the bonnet and straps them down
The New Holland Farmer that would help to balance it up
Question please: why make so many runs to get only a couple bales at a time instead of loading a trailer up and hauling them in bulk,?
Wasn’t many bales and was a short journey. Was just as fast as using a trailer really. For longer journeys I’d use trailers
Do u own the Mac hail bailer? It is very nice and I can imagine it on your tractor.🤠🤠🤠🤠😎😎😎😎🤑🤑🤑🤑
No it’s a friend of ours who also does contract work
Far play Gerry it’s not to often u can cut grass in October
Pjagri video Mcmanus no I never made silage this late. Just lucky with the weather over last few days
gerry6420 I am getting it very tight to spread dung it is very very wet
Tis lashing rain in cork today
Fine baller
Yes lovley machine. Was new last year. Great baler
Crikey, that was s close call between the David Browne and john Deere @ 6:41
Gerry do you find the john deere goes into 3rd and 4th a lot easier than 1st and 2nd
Yes they always were the same. 1st and 2nd never used very much so can be that high tighter to when changing gear.
I really would like to cart bales again but next time have 300kg on the front of the tractor coming along the road bouncing in and out of ditches🙈😂
Masseyman6480 you could have stacked these bales if u were around 😂
@@gerry6420 masseyman is another kid troll like the last tool who used to troll you ,pay no heed
Fendtforlife funny that how I have Gerry on snapchat and have sent him photos and videos of me carting bales saying our MF 390 is better than their 2850😂
gerry6420 aye I know your west of Dundalk but don't have car licence or telehandler licence yet but maybe sum day😂
I started when I was 10
What do you use to edit videos
cam's cars always use iMovie. Just easy and fast. Nothing very fancy. But gets the job done
I hated recording me drawing, but I was holding the camera in one hand lol
whats the name of the song you use
Jayjay.Rice00 it’s on the iMovie app. It’s called modern
@@gerry6420 cheers 👍
What contractor do ye get in?
Do most of the work ourselves . Guy called mark grills does lot of the baling.
Is Jerry your dad
Sam’s Farming life yep. Gerry senior. I’m gerry junior if you like. Not considering at all 😂