Damaged PS5 HDMI Connector Port Repair. Wow This Looks Bad. Full Process
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2021
- WOW, this Sony PS5 HDMI port is destroyed. So let's walk through the disassembly process & take the motherboard out, so we can fix the broken HDMI Port Connector.
🌟 Cordless Screwdriver with T9 Bit: amzn.to/46QHal8
🌟 Extended T9 Bit: amzn.to/3c4YJac
►Check out my new T-Shirts, Hoodies & more: merch.vccboardrepairs.com
►Join the new Facebook Group for Repair Techs vccboardrepairs.com/vcc-fb-group
►Buy Our Seek Macro Lens: vccboardrepairs.com/buy-macro...
►Let me teach you to Microsolder: vccboardrepairs.com/profixerr...
►Full list of Solder Tools: www.vccboardrepairs.com/gear
►Mail us your iPhone/iPad for repair: www.vccboardrepairs.com/conta...
This Sony PlayStation 5 was mailed in to us for HDMI Port repair because it had so signal & I was shocked to see how badly it was damaged.
Luckily, HDMI Port replacements are pretty straight forward repairs.
Follow along with the video to see the whole process.
🔧Here's the tools I used in the video:
✫ Parco Microscope Complete Kit: amzn.to/3qXrGb0
✫ iFixIt Tool Kit: amzn.to/2Zw9Xhq
✫ Magnetic Project Mat for Screw Organization: amzn.to/3I27kW8
✫ Hakko Curved Tweezers: amzn.to/318hmEj
✫ Genuine iSesamo Pry Tool: www.injuredgadgets.com/genuin...
✫ Kester 63/37 0.8mm Solder Wire: amzn.to/365b7AA
✫ Genuine Amtech 559 Flux: www.injuredgadgets.com/catalo...
✫ Super Low Melt 138C Solder Wire: www.mobilesentrix.com/mechani...
✫ Desoldering Wick Braid: amzn.to/3FU8ilf
✫ Replacement PS5 HDMI Ports: www.injuredgadgets.com/hdmi-p...
✫ HDMI Port Small Capacitor: www.injuredgadgets.com/10-pac...
✫ Hot Air Station Quick 861DW: www.injuredgadgets.com/quick-...
✫ Soldering Iron Station Hakko FM203: www.injuredgadgets.com/fm-203...
✫ Large Soldering Iron Tip Hakko T15-D24 Chisel: www.injuredgadgets.com/hakko-...
✫ Check my site for more suggested tools: www.vccboardrepairs.com/gear
► Like us on Facebook: / vccboardrepairs
► Follow us on Instagram: / vcc_board_repairs
⚠ B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardrepairs.com/conta...
Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
![[HIGHLIGHT] หมีLIVEปะ? | EP.171 เห็นแต่ในจอ วันนี้มาต้องขอคารวะ](http://i.ytimg.com/vi/gPWLxa0e_Z8/mqdefault.jpg)
In case you missed it, you can buy the cordless screwdriver kit, replacement HDMI port and replacement small capacitor here:
✫ Cordless Screwdriver with T9 Bit: amzn.to/3E5duCj
✫ Replacement PS5 HDMI Ports: www.injuredgadgets.com/hdmi-port-for-sony-playstation-5/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
✫ HDMI Port Small Capacitor: www.injuredgadgets.com/10-pack-hdmi-port-ceramic-capacitors-for-playstation-5-0-1-uf-0201-cap-taiyo-yuden/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
In the beginning i said its just another common video similar to bulk videos on the youtube but while keep watching found its very helpful in different ways from others, appreciate sharing information specially the amount of heat that shall be applied by heat gun to remove soldering 👍🏼
Wow thank you for watching all the way through. I'm glad you found it helpful!
Wish they put as much effort in to the durability of the HDMI port as they did into difficulty of breaking down the PS5 to fix it. I've had to replace 2 HDMI ports now, and it seems the disassemble and reassemble is the most difficult part of the process.
Agreed!
The teardown is the worst! 😂
Not much they can do with durability
ps5 trash-----the sony board should all be fired
this has been the best video yet your becoming a pro video editor as well
Thank you! Video editing credit goes to my wife ♥️
Very detailed video. Thanks
Thanks for watching!
Make sure to share the video
Damn. Nice Video dude!! Removing the nozzel works great. I was afraid to overheaat the diode and cap on the bottom side. but it didnt take long. I was already using low melt solder. The wick action on the through holes is awesome. I used to get pissed and drill them out with a tiny bit. lol THANK YOU FOR SHARING!
Yes, definitely need to remove the nozzle. These boards can soak up a lot of heat, so it makes it difficult for the solder to melt.
You should check out my latest video, I show an ever better method to swap out the HDMI port: th-cam.com/video/xdJ29Ih01D0/w-d-xo.html
If you shove harder maybe the HDMI cable will go in! I love seeing how people break these ports. Jesse, I think I picked up using a syringe for IPA from you. Thanks. I also like your use of the bulb syringe for blowing off the boards.
Oh that's great! I love mine
Great video on the repair. Love how you show the end-to-end process which helps newbies learn all required steps. I do have a question for you. Why not use a solder sucker (Sold-a-Pult) from the bottom of the board to remove solder from the anchors...then use air from the top for the individual connectors? I'm getting back into repairs after a couple decades away, and I did 100's of connector repairs like that years ago...before HDMI. Thanks in advance for the response!!
Thank you!
And I don't use a solder sucker because I don't have one lol
I don't do HDMI ports often and wick works well enough for me
@@VCCBoardRepairs
Totally makes sense. Thanks for the quick response. When I have one to experiment with, I’ll let you know if it makes any difference.
Sounds good!
I work on consoles full time from home. Great video and process; it's very similar to what I do. The tinning of the pins on the bottom side is something I'll have to do more often. I've never had any issues not doing it, but I can see how it makes things a little easier. Thanks for the video.
Oh that's awesome. We are also a home based business. Although our main focus is iPhones & iPads.
Can you put a PS4 hdmi port into a ps5 ? Like replace the broken ps5 hdmi port for a PS4 one ?
Nope. They're different shapes
@@VCCBoardRepairs How much to repair my hdmi port?
Send me a message through my website for a quote: www.vccboardrepairs.com/contact-us
im trying to do my ps5 hdmi on my own nice video keep up the good work
Awesome! Good luck
Great video 💪.
Appreciate it!
Share the video to support the channel!
Holy Toledo! Great work! Love this repair🏄♂️
Bro! Same here!
The method for removing solder from the pin holes isn't a bad way to do it my only concern is you are putting more heat that normal on the board in that area I mean if you know it won't damage anything around it great but I don't think you can apply that method for every single repair that has through holes. Still great video also the low melt solder I have is kinda crap which is why I don't use it that much. Maybe I should give the iSoldering XW Low Temperature Welding Wire a try.
As long as you don't apply more heat than necessary, I don't see anything being overheated
We’re over here struggling to remove the solder from the pin holes, we got the iron, the heat gun, etc…. Suckers won’t come out.
Hi Jesse, great video! I'm trying to repair my Ps5 hdmi port and got it soldered. But, the video goes in and out and eventually works when I wiggle the hdmi cord in a specific spot. Does this sound like a faulty hdmi port or could my solder joints be bad? Thanks.
Could be either. I'd double check the solder on each pin to see if they're loose.
also try a new HDMI cable
worst case, try another HDMI port
Nice job Jesse! You need a bigger tip for these though! iPhone guys ad there tiny tips :P
Hahaha this is true. This tip is more than enough on iPhones... Not so much for consoles
Hey man! I was wondering if you could tell me the name of the cleaning cloth and where to possibly get it. probably amazon but id rather take your word for it thanks!
They're clean room wipes. You can buy them here: amzn.to/3unazl5
Hi do you possibly know what's wrong with my ps5 after I use it for about an hour or two it turns off and if won't turn back on unless I unplug both cables at the back wait a minute and plug them back in then it does it again like a hour or two later it's weird and I tried cleaning it so it's not that I did hoover the dust out.
Ah, not sure. I haven't seen that before unfortunately.
Hey! I’m looking for the exact hdmi port to put in my ps5. Is there a link to one? I believe it’s the hdmi 2.1 right? I hate to buy the wrong one and my ps5 not play up to it capabilities. Can you send a link if possible.
Check the links in the video description
When determining which HDMI replacement port to purchase, do I need to favor in HDMI 2.1 support. I know the devices and cables are important, but do the sockets themselves vary across HDMI 2.0 and HDMI 2.1?
The port itself doesn't matter. Buy the one from my link in video description & you'll be golden
@@VCCBoardRepairs Thanks a ton Jesse! Vid is super helpful.
hi I have a question if the hdmi cable is damaged, can it cause green screen and console crash?
Hmm not sure! Never seen that before
If you replace the HDMI, will it have the same 4K picture as before or will it be lower quality ??
Yes, 4k will be the same quality.
Great vid man!! I have the same problem with my PS5, you know any shops that are legit and can fix it???
Thank you! If you're in the USA, I can repair it for you. Send me a message for a quote: www.vccboardrepairs.com/contact-us
Same problem here i am very pised about this...
What is upsetting exactly?
14:16 I'm trying to find when you mention the temperature that the hot air station should be set at. Something as delicate as this should be rather precise, I assume. Too hot, and it melts the plastic. Too cold, and the solder won't melt.
Patience my friend. The temperatures are shown in the video
Maybe you can help me out had my ps5 since 2020 no problems up to this point I keep it on usually for 4 plus hours mix of watching Netflix and playing games on it when I am not working.
As of late every time I go to shut off ps5 once it gets to screen when it says ps5 is shutting down it blinks extremely quickly then comes back on and shuts down.
Never did that before only time it does is if it’s on 4 plus hours ( not even everyday)
Any idea what it is??? Just replaced original hdmi cable with new one still has same problem.
Thanks
Not sure, Never seen that before.
17:24 how do you not heat up the small components on the other side of the board without them falling off, is their solder melting temp ALOT higher than the hdmi ports solder which you applied low melt to?
Surface tension keeps them in place
@@VCCBoardRepairs thankyou
Good day my hdmi port got damage got it fix but the port keep coming off and I have to get it risada can u tell me what would have it to keep coming off
Did you solder it correctly?
Now who is doing HDMI ports!! Jesse is haha!!!!
Haha sure am!
could that capacitor result in no image if it's blown?
Capacitors don't "blow". They short.
In theory, if that cap shorts, then yes, it could possibly cause no image.
Although, I have never personally seen that.
How do I check the HDMI chip? My HDMI port is new as of today and still no image. Also, Do we REALLY need that tiny cap for it to work?
you can try probing all the pins around the encoder chip & see if any shorts.
and technically, you don't need that cap but i always make sure it's there.
@@VCCBoardRepairs thanks for the reply. I'll try that.. There's a MOSFET near the HDMI port too, that can go bad, but I'm not sure if I know how to test that properly..I think it's good... But I don't KNOW.. I'll learn more I guess.
Same with me the game have a blue light on it, did ur game work
Cool video brother but it's not abuse that ruins the port. I've moved mine 3 times in the same house and it died unexpectedly during an important part of a game haha. I have the tools and enough experience to trust myself over anyone else where I live hahs
This one was definitely physical damage by the device's owner.
How hot did you get your iron to melt off the solder for the legs? I've tinned my iron and added my flux and watched for the solderbto melt away but its nit melting
i think my iron was set to 380C. Although, hot swap method is a better method. You can find it in my channel as well
@@VCCBoardRepairs I'll watch your video and see if that works. From what I can tell and research is that the solder used on the board is a high temp solder. With my iron being at 480C it didn't do anything
naw whats better is testing a device and forgetting to plug in the hdmi cord in general and wondering what the hell did i do
love the videos buddy you make it look so simple
Hahaha 🤣
It happens
Thanks for watching! Share the video to support the channel!
Change the port now and getting a blue light but no signal
Sounds like maybe the port wasn't properly installed. Double check your work.
If still you have issues, try asking for help in my group: www.vccboardrepairs.com/vcc-fb-group
Why don't you just use a desoldering iron for the anchor holes?
It's not necessary
Can destroy the hdmi port the heat ? Because on some games ps5 crossplay, I see the cable connector is very hot ,,more than ps4 games or that is normal ? Please answer, thanks
unlikely
What parts do we need?
They're all mentioned in the video description. Did I leave anything out?
Man. Im having a horrible time with some torn pads. Im a hobbyist and a professional but i have all the gear. Its a broken one i replaced thats just not working. The system is booting fine but no video. I dont do this for a living but what's the best thing to use to fix the traces. I fix things for fun and im decent at it but im going to give it 2 more tries before it's a parts board.
I enjoy smd. Theres no shorts on any rails. Im missing some screws though. Do you know any facsimiles i can use to reolace the black and short silver ones. I literally have every type of flux, solder, copper wire, a decent 4k scope. Should i invest in the sheets of copper strips? I have all the smd component parts and tested them but im missing a trace. Im almost 100 percent sure i know which one. Im not doing this for profit. Im giving away the system to a friend who cant afford a system.
Any advice would be greatly appreciated. Ill even give you 20 as a thank you. I've reballed socs that never gave me this kind of trouble hahahaha. Like i said, i do this for fun. I dont take on jobs, im into theory for the most part.
I know this has been long winded and im sorry. The cap value is 10nf says my flir lcr meter. I can give you the part numbers for all the smd parts so you dont have to pay a fortune for mostly common parts. The diode is a fast recovery swiching diode next to the 27k resistor and ill email you photos so you can know what to get for certain when you do an order haha.
Anyway thanks. Youre a great technician.
If you're missing a pad for the HDMI, I would recommend watching my Hot Swap Video. I have a few ripped pads in that video & show the process to repair them and get it all working: th-cam.com/video/xdJ29Ih01D0/w-d-xo.html
Doing this method doesn't burn out the plastic in the new port? I tried this once on a ps4 and burned the insides.
Actually it doesn't. It appears to be much safer method than heating it from the top
I think the key is using the right temperature for your hot air station
@@VCCBoardRepairs ok I'll try it this way on my next console
one request please make videos
ohm mode shorting
Hi. What do you mean exactly?
@@VCCBoardRepairs can ohm mode detect which part is short
and ohm mode how to use board repire
Yes but I prefer using diode mode to detect a short
I need help fixing mine
Ok great. Send me a message for a quote: www.vccboardrepairs.com/contact-us
im tryna learn how to do this because places are charging 180-250 dollars and the hdmi piece is only $13
Microsoldering is an advanced skill that requires hundreds of dollars of equipment & lots of hours of experience to successfully repair this. So if you take this into consideration, the prices you are quoted are a fair price.
Although it may look easy to watch me do it, once you try it yourself, you'll see it's not as "easy" as it seems.
Where can I see you don’t fix my PS five is the same problem
I don't understand. You need your PS5 repaired?
Where are you located?
The mechanic low melt solder is fake, doesn’t melt at 138c more like 190c
How much would you usually charge someone for this repair?
If you'd like a quote, please send me a message: www.vccboardrepairs.com/contact-us
can this be done without the microscope, by a guy with no soldering experience? lol. I've taken lots of consoles apart to replace thermal paste, clean the fans, heat sinks etc. but never soldered. I feel I won't mess up the screw placement, but is this an ok first project for learning soldering? lol
If it's your first time ever soldering, I wouldn't recommend it. You would need to get familiar on how solder behaves with heat. Also need to learn how to handle components when trying to solder & desolder them.
You can easily pull too hard (due to lack of experience) and rip a ton of pads & destroy it.
Buy a dead PS or Xbox console board & practice pulling & placing it a few times.
I'm assuming you have a legit hot air station and not some wagner heat gun..
You can use my group to ask for additional guidance: www.vccboardrepairs.com/vcc-fb-group
@@VCCBoardRepairs thanks for the response. I will probably let a professional do this one and look for something to practice on in case it happens again.
Can you use a hair dryer in place of a hot air gun?
No you can't. It would never get hot enough to melt the solder
Thats straight neglect
Yes! 🤣
Can you fix my hdmi
If you're in the USA, yes I can. Message me for a quote: www.vccboardrepairs.com/contact-us
Imagine that, a PS5...People have no clue how to take care of stuff..SMH Thanks for the video Jesse
Yeah it's crazy! No idea how it happens
It's the PS5 not the people it's a common issue
my kid has had his PS5 for 2 weeks.... he tried to move it to a different room and mangled the HDMI port. In all my life, I have never had any HDMI port completely crumble like this giant, overpriced POS
Oh no, that is unfortunate. If you're in the USA, I can help with repairing your PS5. Send me a message for a quote: www.vccboardrepairs.com/contact-us