@dorky, 2 scythe, decal, color. Tbh, I just wish they do something about their problematic parts, then definitely going to get them (neck part, unfit katar, effect part etc)
Also they han shuang released a new mokit finale assaut. I have ordered, it looks good if you like busy and edgy looking mecha. But MG hasnt reviewed though.
I wouldn't call this kit a bootleg, it's an original product by a third party. Sure, it looks like a Gundam, but it's not based on any existing design. A bootleg would be a copy of a design that already exists, whether 1:1 or with slight modifications, but this seems to be an original design. Either way, love the kit and would love to get my hands on one soon. ❤️
This is a direct rip from the Blitz Gundam. The way the claws mount on the arms, the head/torso/leg design, it's all directly derived from the Bandai MG, though it is tweaked enough that you wouldn't notice unless you looked closely. The backpack is completely unique, but I bet you could throw on the Trikeros shield on the right arm with one of the Hunt and Kill claws on the left, and you'd see the resemblance.
Here’s a tip for panel lining, if you’re gonna use those pour type pens or the tamiya liquid then do a light layer of topcoat on the kit first and once dried panel like the kit, that layer of topcoat will protect the plastic from the solvents, once that’s done you can add the decals and give it the final layer of topcoat Edit: i’ve also seen people recommending lighter oil to clean up excess panel liner, though its also been noted to dissolve lacquer paint if used too much
Supernova/ZA kits are fantastic I’ve built their take on the Deathscythe Hell and I’m currently building the Hunt & Kill. I’m loving it! They also make Zoids kits that are supposed to be great too! Especially the Berserk Fury kits they have. I have both in my backlog that I can’t wait to build.
@@havsss Either one. Because after you apply the water slide to the model, you’ll need to apply another layer of topcoat to the model to protect it anyway
As a French viewer, really happy to see the store Rise Of Gunpla mentioned in one of your videos, another great review btw. Thanks a lot for your hard and consistent work.
This has been coming in and out of stock on MC for over a month now. I ordered it a while back and it went out of stock shortly after that, but I've noticed it in stock a couple times when I check their site, so it seems like they're getting restocks.
Every time I see this unit it just makes me think this is an upgraded version of the blitz gundam Like how the strike freedom and the infinite Justice are upgraded versions of the Freedom and the Justice. Because this looks a 1000 times better than the nebula blitz Or the Nero blitz, Just like how the 0 gravity judge forbidden Looks a 1000 times better than the Rot forbidden gundam
This is one of the rare occasions that I built a kit before you, but yeah this thing was a treat to build. Be ultra careful with the staff piece, I broke mine when plugging in the "funnels" at the ribbed area. Trying to find someone locally to make me a metal one. Also, I would say this is a bit of an homage to Blitz Gundam. Overall bada$$ kit.
Hey Mecha Gaikotsu, did you know that Supernova has their take on Zoids as well? I've been dying to see you review more Zoids. One because your reviews are awesome and for another it'd help Zoids popularity amongst the Model building community. I'd really enjoy seeing your take on the Supernova ZA Berserk Fuhrer. Shame I didn't win this bad boy but that's ok. I just ordered two for a custom paint job idea I have.
I’m currently building this guy, it’s a lot of fun. I was getting a bit bored with gundams since I’ve built so many but this last month I’ve been building my all of my 3rd party kits and so far it’s been a breathe of fresh air. Can’t wait for my motor nuclear kits to get in👍
Too many comments to look through, but I just found out the hands (wrist ball joint) fit pretty well into the funnel-type things (9-4 in the instructions). Rocket punch?!?
Huh, those "shield" thingiws with the yellow parts flipped reminds me of the Red Frame Kai's buster sword in bow mode. Maybe they can be used as bows and the grabby things as the projectiles, idk.
Have you done reviews for other kits such as the Trailblazer and Redeem? I know youve done the Sky Judge; would love to see more third party kits on this channel.
I'm thinking of buying the zero gravity the judge but it is quite expensive... Should i buy that model or the supernova hunt and kill since both are ranked gundarium tier?
Please try and review ZA Death Stinger hehe I also am experiencing the same thing with bandai not releasing enough new kits (though, my collection is waaaay smaller than yours) and stumbled upon this massive supernova version of HMM death stinger. More power to the channel!
the decal sure are veryy thin, but theyre the most durable decal i ever had, like gripped the plastic with the decal and slipped many times but the decal still intact
I love his kit, my only gripe a very minor. The undersides of the backskirt and some of the shoulders are all clear purple and wish it was a separate part instead
previously they was call"super nova" , redesign a series of w series gundam and become famous, especially all white preluxe wing zero custom, but now they are regroup as "SNAA",and falcon is the first product totally design by them, a new start over
Do find a way to get your hands on a Knight of Dark/Night Sky! Super cool kit that's totally original as well. It does come with a plastic inner frame, but the thing has so many cool articulation gimmicks and poses up a storm!
Love your content and I just found this kit on the website currently out of stock not sure I don’t read or speak French so I’m just guessing based off it saying Rupture de stock.
thank you so much for the review, i decided to bought it and it is actually really really cool and the most important thing is it's quite fun to build, but yeah few parts keep falling off so cementing is the best choice. edit : and also be careful while building it cause those pointy parts could seriously get u hurt xD
I originally tried the pour type panel liner too to see how it would fair. I tried it on the V fin first since you get 4. It came out fine so I started using it every where and it didn't crack anything till I hit the forearms as well
Hey Mechanic Gaikotsu I need help I too bought a Supernova Hunt and Kill but sadly put a little too much pressure on the hip joints connecting to the leg. Parts D-12 and D-15 snapped off and are stuck in the leg portion step 6-3. I’ve tried using a pin and extra runner parts to fix the leg but no luck because there’s just a hole in D-12 and D-15 resulting in no stability. Any advice on what I should do? Thanks
the amount of supplementary parts and action base is what I like from Super Nova but their plastic quality I feel is softer than that of bandai's. I really hope they have improved these original designs (please correct me if i'm wrong) Bandai! please include an action base on your kits.
That opening bit about the lack of new releases this year, like only the modified reprints of the ancient Dom, reminds me that HGUC has only ONE release this year, that being the HGAC Shenlong. If another HGUC was coming then we'd have heard of it by now. New retail releases are becoming pathetically scarce which concerns me.
Winner of the Huntand Kill Giveaway: Reijigamer
btw there's another version of the Judge incoming but i believe just with different backpack
CONGRATULATIONS!!! EVEN THOUGH I KNOW THEY CANT SEE THIS LOL
@dorky, 2 scythe, decal, color. Tbh, I just wish they do something about their problematic parts, then definitely going to get them (neck part, unfit katar, effect part etc)
Also they han shuang released a new mokit finale assaut.
I have ordered, it looks good if you like busy and edgy looking mecha.
But MG hasnt reviewed though.
@@dorky2958 sick
I wouldn't call this kit a bootleg, it's an original product by a third party. Sure, it looks like a Gundam, but it's not based on any existing design. A bootleg would be a copy of a design that already exists, whether 1:1 or with slight modifications, but this seems to be an original design.
Either way, love the kit and would love to get my hands on one soon. ❤️
@This
"original" (heavily) based on Seed series that is
Blitz "custom" i would say
*point at Blitz gundam
This is a direct rip from the Blitz Gundam. The way the claws mount on the arms, the head/torso/leg design, it's all directly derived from the Bandai MG, though it is tweaked enough that you wouldn't notice unless you looked closely. The backpack is completely unique, but I bet you could throw on the Trikeros shield on the right arm with one of the Hunt and Kill claws on the left, and you'd see the resemblance.
Word of warning to anyone who wants to build it but hasn’t: *WEAR GLOVES.* You WILL draw blood on those edges.
A little blood sacrifice for such a Glorious kit seems in order.
I built the Super Nova ZA Hayate Liger, so i do know what you mean.
I built the Super Nova ZA Hayate Liger, so i do know what you mean.
Well during my first days with my little hobby knife everytime i trim i always cut myself 😂
Nahhh .. i built it already and it's not that complicated and those sharp edges are easy to avoid. Zzzzz
The Hunt and Kill really looks like it can rip and tear!
it also looks like it will rip n tear my wallet.
Should’ve been named the rip and tear instead then lol
it will rip and tear your fingers up when building
@@angerydolphin9199 i got it for like 30$ a lil bit less than an ordinary bandai mg kit
it actually rip and tear your flesh tho....
This looks amazing! The pointy silhouette and that imposing yellow V fin reminds me of the Blitz!
I have built this kit for about a month ago, and up until now it still blows me away whenever I look at it on my shelf
"Bootlegdarium" tier is now official
Here’s a tip for panel lining, if you’re gonna use those pour type pens or the tamiya liquid then do a light layer of topcoat on the kit first and once dried panel like the kit, that layer of topcoat will protect the plastic from the solvents, once that’s done you can add the decals and give it the final layer of topcoat
Edit: i’ve also seen people recommending lighter oil to clean up excess panel liner, though its also been noted to dissolve lacquer paint if used too much
Gonna do that gotta use gloss top coat as the base the decals can silver if layed on matte.
I've been looking for help on this ever since I had a head camera crumble off at the panel line.
Thank you for the heads up!
Especially on white plastic. tamiya love "eating" white plastik
I use boiled linseed oil
Supernova/ZA kits are fantastic
I’ve built their take on the Deathscythe Hell and I’m currently building the Hunt & Kill. I’m loving it!
They also make Zoids kits that are supposed to be great too! Especially the Berserk Fury kits they have. I have both in my backlog that I can’t wait to build.
Where can I get some of the other kits shipped to uk, can only see the hunt&kill on riseofgunpla.
@@blazinkid5178 have u tried taobao? Idk if they shipped to the uk tho
Have you built the berserk furies yet? I'm considering getting the blue one, but not sure how much shelf space I need.
Quick tip for water slide, topcoat it on the sheet before you cut them out. Just a thin layer will make them strong enough to apply and falling apart
I wish I saw that tips before, I had to play puzzles with some stickers.
Should I use gloss or matte for this?
@@havsss Either one. Because after you apply the water slide to the model, you’ll need to apply another layer of topcoat to the model to protect it anyway
CONGRATS REIJI! I've seen you around a lot on the USAGS Friday streams lol. Have fun building this beast!
Thanks.
4:47 I was n o t prepared for that absolute behemoth of an eva kit lmao
I love how the not-v-fin kinda looks like big angry eyebrows.
“No. That thing is a Gundam.”
- Delling Rembran, probably
This is what i mean, bootleg company creating their own gundam. Not just pure copying.
The first 3rd party kit I've built and I loved it. Looks great, top 3 aesthetics I have.
As a French viewer, really happy to see the store Rise Of Gunpla mentioned in one of your videos, another great review btw. Thanks a lot for your hard and consistent work.
supernova is great, I have that gorgeous angel and it was a blast to build, way more detailed wings than the Bandai version 10-fold
What a nice kit, very much love the purple coloring of it. That's nice!!
If Supernova didn't name their next kit that uses the trigger hand 'Search and Destroy", I'm gonna lose my mind
4:47 Eva-01 be like "Oh, is little ol' me getting in the way a bit?"
Hot damn, this kit looks amazing. Have a feeling its gonna gain Zero gravity judge mythical levels of unattainability
Gundam Model Center has them in stock now!
And the zero gravity judge is available again but in a moonlight color
This has been coming in and out of stock on MC for over a month now. I ordered it a while back and it went out of stock shortly after that, but I've noticed it in stock a couple times when I check their site, so it seems like they're getting restocks.
there should be a drinking game of how much Mecha Gaikotsu says "just like so"
Those decals is nightmare
always appreciate your videos! so so so glad i preordered this kit a few months ago
These China version kit mostly come with lower quality material and bad production but tend to be very generous with amount of thing in their box
After building this I can say it's one hell of an experience first time getting scars from building kits
Been waiting for this to be reviewed. It was the best non-Bandai kit I've ever seen.
Preordered this a few months back and while I wasn't big on the color scheme I can't wait to get this in hand.
Can this be built to look somewhat like the Blitz Gundam? Thinking about getting this now.
This is based on the Blitz Gundam so yeah...you can customize it to look like Blitz
I'm painting mine in the Blitz color scheme
Finally I’ve been waiting for this review for so long
This Bootleg reallye amaze me and i cant wait to customize it myself its beautiful and have its own aura of gundamness
i built this one yesturday and my fingers still hurt from all the sharp points, but damn if it isn't a beautiful kit when its done
Every time I see this unit it just makes me think this is an upgraded version of the blitz gundam Like how the strike freedom and the infinite Justice are upgraded versions of the Freedom and the Justice. Because this looks a 1000 times better than the nebula blitz Or the Nero blitz, Just like how the 0 gravity judge forbidden Looks a 1000 times better than the Rot forbidden gundam
24:08 You can get more out of the ankle by rotating the joint inside the ankle.
This is one of the rare occasions that I built a kit before you, but yeah this thing was a treat to build. Be ultra careful with the staff piece, I broke mine when plugging in the "funnels" at the ribbed area. Trying to find someone locally to make me a metal one. Also, I would say this is a bit of an homage to Blitz Gundam. Overall bada$$ kit.
Mine showed up last week..looking forward to building!
Just bought mine, so excited for this!!
it's practically a Modified Blitz gundam
if you put this by the side of the Calamity, Raider, and Forbidden, this could pass as a 4th Bio-CPU. Now it's just a matter of getting a name
Blitz Gundam 2nd generation
Heretic Gundam?
@@walterdayrit675 it works, Heretic Gundam seems to be a good fit
Just order mine, i was waiting for the review. I've miss the Judge, i'm not gonna miss this one. Thanks for the good review.
Hey Mecha Gaikotsu, did you know that Supernova has their take on Zoids as well? I've been dying to see you review more Zoids. One because your reviews are awesome and for another it'd help Zoids popularity amongst the Model building community.
I'd really enjoy seeing your take on the Supernova ZA Berserk Fuhrer.
Shame I didn't win this bad boy but that's ok. I just ordered two for a custom paint job idea I have.
I’m currently building this guy, it’s a lot of fun. I was getting a bit bored with gundams since I’ve built so many but this last month I’ve been building my all of my 3rd party kits and so far it’s been a breathe of fresh air. Can’t wait for my motor nuclear kits to get in👍
When did you painted your nail?
Building this kit requires blood and sweat sacrifice
This looks like the blitz gundam to me, and I love the blitz
Also, everything is way too tight like when I tried moving the leg it fkin broke the thing connecting it
This looks very good!!
Too many comments to look through, but I just found out the hands (wrist ball joint) fit pretty well into the funnel-type things (9-4 in the instructions). Rocket punch?!?
I ordered mine yesterday, cannot wait
Huh, those "shield" thingiws with the yellow parts flipped reminds me of the Red Frame Kai's buster sword in bow mode. Maybe they can be used as bows and the grabby things as the projectiles, idk.
I hope your next non-Bandai kit review is the Motor Nuclear MNP-XH03 Azure Dragon. It is the model kit version of the metal build MNQ-03 Ao Bing.
That Barbatos 6 form looks hurt lol
i think super nova based hunt and kill to blitz, the silhouette, and the glepneirs are in this kit
This kit was really fun to build, although I agree the satellite builds were repetitive.
Mecha, i recommended build Mugen liger Supernova. Their include extra pair Blade from previous liger so itu can build into 4 bladed liger
A metallic double ended shaft, oh the possibilities!!!
Have you done reviews for other kits such as the Trailblazer and Redeem? I know youve done the Sky Judge; would love to see more third party kits on this channel.
I'm thinking of buying the zero gravity the judge but it is quite expensive... Should i buy that model or the supernova hunt and kill since both are ranked gundarium tier?
Please try and review ZA Death Stinger hehe I also am experiencing the same thing with bandai not releasing enough new kits (though, my collection is waaaay smaller than yours) and stumbled upon this massive supernova version of HMM death stinger. More power to the channel!
this is alternate universe blitz gundam.
the decal sure are veryy thin, but theyre the most durable decal i ever had, like gripped the plastic with the decal and slipped many times but the decal still intact
“Dreadlock Gundam” made me think of Gundam Nadleeh.
Try the Supernova HeavyArms Custom. Basically an RG 1/100 scale
I really enjoy my heavyarms IGEL from supernova. It was a bit of a pain to actually get, but I'm very happy with it.
A flimsy kit hahaha. Hand grenade
I love his kit, my only gripe a very minor. The undersides of the backskirt and some of the shoulders are all clear purple and wish it was a separate part instead
previously they was call"super nova" , redesign a series of w series gundam and become famous, especially all white preluxe wing zero custom, but now they are regroup as "SNAA",and falcon is the first product totally design by them, a new start over
I swear, this _should_ be an actual Gundam design. Its legs even look "Knight Gundam"-esque.
This kit reminds me of a re-imagined blitz gundam
dude picked up th meng evangelion at 4:48! Do a review of it please :)
Do find a way to get your hands on a Knight of Dark/Night Sky! Super cool kit that's totally original as well. It does come with a plastic inner frame, but the thing has so many cool articulation gimmicks and poses up a storm!
More hand backs would be a welcome because I have lost so many do to my cats liking to attack the weapons
feels more like an evolution of the Blitz Gundam.
Looks like Transient Gundam Glacier and Dreadnought Gundam had a baby
You know it's crazy but I don't think I've ever broken a V-fin in my 5 years of building.
If you like the color scheme and engineering of Super Nova Falcon, you should check out their Heavyarms
Love your content and I just found this kit on the website currently out of stock not sure I don’t read or speak French so I’m just guessing based off it saying Rupture de stock.
That 4 boosters almost resembles the Dreadnought Gundam
It jas been 2 years where is the ibo custom
So happy to see a 3rd party kit received a gundarium tier
Sir. I thank you formally for the consistency. Please fufil what you need and. We’ll watch
thank you so much for the review, i decided to bought it and it is actually really really cool and the most important thing is it's quite fun to build, but yeah few parts keep falling off so cementing is the best choice.
edit :
and also be careful while building it cause those pointy parts could seriously get u hurt xD
I originally tried the pour type panel liner too to see how it would fair. I tried it on the V fin first since you get 4. It came out fine so I started using it every where and it didn't crack anything till I hit the forearms as well
so it cracked?
@ChrisTian-sd5yq yes. It's been some time and it recently fell so I can't remember exactly what piece cracked due to the fill type panel liners
@@ElliotButch23 damn, I have the purple/version in my backlog, can I ask if the spear rod is still ok?
@ChrisTian-sd5yq the rod is just fine only part I remember breaking is one of the claw things that attaches to the arm.
@@ElliotButch23 claw thing from the giant weapon/booster?
I really like this one
Awesome 👏 bootleg Gundam can’t wait to add to my wish list and let’s give a good 👍 to Reiji Gamer for winning the giveaway
Hey Mechanic Gaikotsu
I need help I too bought a Supernova Hunt and Kill but sadly put a little too much pressure on the hip joints connecting to the leg. Parts D-12 and D-15 snapped off and are stuck in the leg portion step 6-3. I’ve tried using a pin and extra runner parts to fix the leg but no luck because there’s just a hole in D-12 and D-15 resulting in no stability. Any advice on what I should do?
Thanks
the amount of supplementary parts and action base is what I like from Super Nova but their plastic quality I feel is softer than that of bandai's.
I really hope they have improved these original designs (please correct me if i'm wrong)
Bandai! please include an action base on your kits.
(Not)gundams that have no mouth vents always look astounding
All need help, what top coat should i use for this gundam?
Still trying to score one for my channel! how is the shelf presence?
Are you going to do a review of the MG EX-Impulse. I already have one but I love your video’s so I’d like to know how you think it stacks up 😊
Hello, can anyone give me 3rd party or bootleg suggestions like this? Thank you in advance😃
I got this kit, it is phenomenal!!!
That opening bit about the lack of new releases this year, like only the modified reprints of the ancient Dom, reminds me that HGUC has only ONE release this year, that being the HGAC Shenlong.
If another HGUC was coming then we'd have heard of it by now.
New retail releases are becoming pathetically scarce which concerns me.
Between this and the judge, with do you prefer, and with do you think is better?
what are those lights that look like explosions called? would love to have some for my display!!
mecha could you do the hg m1 astray from gundam seed
or the strike noir
Hello do you plan on reviewing the judge reprint and did your judge as held up since you built it ?
Could I top coat and then panel line with the pour type?
Got it for $45, what a build indeed!
Does anyone know where I can get the Judge? Ive been on the hunt for it for ages but I cannot find it anywhere being based in the UK
4:00 you think this is bad. Wait when you are be assembling Wing :) lol
4:57 what Eva is this? It's not RG i asume
It's the MENG Eva Unit 1! 19 Inches of pure angel-killing plamo