Please support the channel by using my amazon links! For just the Charge port click on the links below: Charging Port Connector : amzn.to/3bbRqZV Charging Port Flex Cable : amzn.to/30TBsSn Recommended 3 Pack Screen : amzn.to/2ZlrqJ4 Recommended UAG : amzn.to/30V3kpc Heating pad: amzn.to/3mbIytW Heat Resistant Gloves amzn.to/3EsZdyW My blue mat to keep everyone organized: amzn.to/3BalS16 iFlex Opening Tool with Glue Card : amzn.to/35UC9h8 iPlastix Opening Tool with Glue Card : amzn.to/38FtzUH on of my favorite screw driver sets 2uul: amzn.to/3jsqkCz amzn.to/3CcoL2Y iseasmo w/ Kit (Has Screw driver too) amzn.to/35Za2O0 Tweezers: amzn.to/3B7yBlf T-7000 Water sealing glue: amzn.to/3EdzLxs Isopropyl Alcohol For Technical Use: amzn.to/3BqBU78 Need to get a part from a reliable quick source, you'll find a better price here then Amazon and the quality will be a lot better. Click on the link below. www.injuredgadgets.com/?acc=be9b6cec65c863e1b55538d2c7fcc9b0 • Visit our Website: tech-md.com • My email: dustin@techmd.bz • To mail in your phone, please contact us at 801-438-6028
Connect the tabs before you place the charge port down. That sticky tape can be a bastard to lift up if u screw up. And yea why didn't u soldier like matey said?
Be intresting to see and find out. Iv done a few and delebratly left out the soldier tabs and it still worked but u could feel eletrol static whilst charging through the frame.
Allways connect the battery tab last...... I see here it's allready connected. This can cause black screen of death. Iv been repairing computer and gadgets for 17 years?+ they say u can no longer replace apple parts without going direct to apple but I have a direct supplyer and all my replacements work. Even the biometric sensors. I have the software to reprogram the home button and pair it with apple.
Iv noticed this guy does alot of guessing and assuming. Does he charge for these services or does it as a hobby...... When I do a job for a client I make sure I'm %100 confident I can do the job before I continue.
invaluable information regarding the micro soldered chip.
Please support the channel by using my amazon links!
For just the Charge port click on the links below:
Charging Port Connector :
amzn.to/3bbRqZV
Charging Port Flex Cable :
amzn.to/30TBsSn
Recommended 3 Pack Screen :
amzn.to/2ZlrqJ4
Recommended UAG :
amzn.to/30V3kpc
Heating pad:
amzn.to/3mbIytW
Heat Resistant Gloves
amzn.to/3EsZdyW
My blue mat to keep everyone organized:
amzn.to/3BalS16
iFlex Opening Tool with Glue Card :
amzn.to/35UC9h8
iPlastix Opening Tool with Glue Card :
amzn.to/38FtzUH
on of my favorite screw driver sets 2uul:
amzn.to/3jsqkCz
amzn.to/3CcoL2Y
iseasmo w/ Kit (Has Screw driver too)
amzn.to/35Za2O0
Tweezers:
amzn.to/3B7yBlf
T-7000 Water sealing glue:
amzn.to/3EdzLxs
Isopropyl Alcohol For Technical Use:
amzn.to/3BqBU78
Need to get a part from a reliable quick source, you'll find a better price here then Amazon and the quality will be a lot better. Click on the link below.
www.injuredgadgets.com/?acc=be9b6cec65c863e1b55538d2c7fcc9b0
• Visit our Website: tech-md.com
• My email: dustin@techmd.bz
• To mail in your phone, please contact us at 801-438-6028
Connect the tabs before you place the charge port down. That sticky tape can be a bastard to lift up if u screw up. And yea why didn't u soldier like matey said?
did it even charge with the new port ? as you didn’t micro solder
thanks
Be intresting to see and find out. Iv done a few and delebratly left out the soldier tabs and it still worked but u could feel eletrol static whilst charging through the frame.
Allways connect the battery tab last...... I see here it's allready connected. This can cause black screen of death. Iv been repairing computer and gadgets for 17 years?+ they say u can no longer replace apple parts without going direct to apple but I have a direct supplyer and all my replacements work. Even the biometric sensors. I have the software to reprogram the home button and pair it with apple.
Iv noticed this guy does alot of guessing and assuming. Does he charge for these services or does it as a hobby...... When I do a job for a client I make sure I'm %100 confident I can do the job before I continue.