I'm getting the Ryobi as soon as it goes on sale., currently $130 for full price, mostly since I have the batteries on-hand. I had hoped there would be a black Friday 2021 sale, but not so on this unit, this year. I understand the safety switch on this model... because there is no "bump" switch on the head like with the 16 & 18 GA nailers. It will fire even if not pressed up against the workpiece. My 16 & 18 GA Ryobi nailers and 1/4" narrow crown stapler have performed very well for my light needs around the shop and home remodeling.
I've been in the market for a cordless pin nailer, but the constant bad reviews of the Makita have held me back. The Makita is also typically $60 more than the Ryobi. I do not have any other Ryobi tools, so I ordered an adapter that will let me use my Ridgid batteries with the Ryobi and I have been happy with it.
I just bought the Ryobi airstrike 23ga cordless for $178 CA, and I got the 2Ah 18V Lithium-ion battery starter kit free from Home Depot Canada, offer ends this Sunday Oct 3rd
While not a household name, VonHaus also sells an 18V 23ga pin nailer. VonHaus has been around for a few years now and have several cordless tools that use the same 18V battery. Amazon and eBay sell VonHaus tools.
The Milwaukee 23 gauge 12 volt pin nailer is on its way. maybe you can pick that one up since you already have the batteries for it and see what you think
Hoping you can help! I bought this pin nailer back in March and yes...I'm just now getting a chance to try it out. I am having nothing but issues with getting the pin nails to go all the way into the wood. I've tried different types of wood as well as sizes of nails and all are leaving the tip of the nail out. I don't see where you can change the pressure on this tool either. I've been trying to troubleshoot this but not having any luck. Some say I need a 4AH battery for power, yet other sites say the 4AH only gives longer battery life, not power. I currently have a 1.5 & 2.0AH batteries and neither are pushing the nails all the way in. Thoughts?
Would of like to seen shooting through different types of solid wood. Maybe some base shoe on the floor to see how it works close to the ground. Also using it on some thin finish trim.
I have a couple of these and also have makitas 18 gauge that uses the same body type and they works great. note the 18 gauge isn't sold in the United states
Question, does the Makita actually shoot deeper if the depth setting is set all the down? I'd like to see a head to head, my theory is the Ryobi actually will shoot deeper.
The problem is that the pins are so small that you pretty much can't see where the head sits, only the indentation. The only way you could really tell is if it's sitting proud or you shoot through thin stock and figure out how much is exposed.
Like kat tools the person using the tool is definitely more important than the tool it self. I’d rather save money and be able to by a larger variety of tool. I have a bunch of Ryobi and Dewalt tools. Honestly you couldn’t tell what tool sinuses in my work. I have put thousands of Brad nails through a Ryobi 18g and no issues at all
The metabo is the same as the hitachi because i called them a time for parts and they said it is the same company(metabo, hitachi & hikokki).......they are very powerful but leave the finish surface marred for a pin nailer so from your review the makita is very nice but i will have to stand with the m12 pin nailer which is the best for me, i believe once any cabinet maker use that they won't let it go away from their hands again lol😎going in 2 years now and has never jammed on me yet.😁
Hey Adam. Thanks for making the video. It reminded me that I "need" a battery-powered pin nailer. I have both battery platforms, as you may know. So, whichever comes in at the lowest price point, I'll snatch up.
Get the Makita, or the M12 if you have those batteries. I've had the Ryobi since the day it was released and not having a depth adjustment is a huge deal breaker. I also have the Ryobi 18ga brad nailer, 18ga stapler and 16ga finish nailer and they are all fantastic - the 23ga not so much.
I thought Makita can only shoot down to 5/8 size and Ryobi is 1/2. Also can you adjust the depth with the knob on the back for the "air force" on the Ryobi?
Hello from Russia !!! I want to order ryobi p318 on eBay - we don't sell one like this .. Tell me, is there a spare firing pin for sale? And how does it behave after a while?
@@LazyGuyDIY Normally you can on HD site but it's crazy, US just doesn't have any anywhere. I was actually able to find a blemished one on Direct Tools Factory Direct which is the only other US Ryobi authorized dealer. We'll see if it shows up, fingers crossed.
I have used both of these professionally and I have tons of Makita tools but in this case ryobi is hands down better. The Makita is lighter , more compact and cooler looking. But ryobi does way better job sinking the nails consistently. Also the Makita has the push tip safety like a regular nail gun and that's not well suited for this application. Now Milwaukee also makes great cordless pinner. Have yet to try DeWalt. Good luck
The Ryobi has a replacement tip also. It's stored on the tool's right hand side right behind the allen key.
I'm getting the Ryobi as soon as it goes on sale., currently $130 for full price, mostly since I have the batteries on-hand. I had hoped there would be a black Friday 2021 sale, but not so on this unit, this year. I understand the safety switch on this model... because there is no "bump" switch on the head like with the 16 & 18 GA nailers. It will fire even if not pressed up against the workpiece. My 16 & 18 GA Ryobi nailers and 1/4" narrow crown stapler have performed very well for my light needs around the shop and home remodeling.
Yeah, I was a little surprised it wasn't included. The AirStrike series is usually in the holiday sales.
Milwaukee just launched a cordless 23g pin nailer. Would love to see you review it.
12v though....
I've been in the market for a cordless pin nailer, but the constant bad reviews of the Makita have held me back. The Makita is also typically $60 more than the Ryobi. I do not have any other Ryobi tools, so I ordered an adapter that will let me use my Ridgid batteries with the Ryobi and I have been happy with it.
Great review - I have the Ryobi and have been really impressed with it!
Thanks Ethan! What kind of projects are you using yours for?
@@LazyGuyDIY I made some deadlift barbell stands - yeah and you're right, they clearly weren't for me haha
I just bought the Ryobi airstrike 23ga cordless for $178 CA, and I got the 2Ah 18V Lithium-ion battery starter kit free from Home Depot Canada, offer ends this Sunday Oct 3rd
You can open the Ryobi from the front too. It also has an automatic depth sensing drive. Far better than the kita.
Ooooo I need that Makita. Only because I already have the batteries. I’ve heard good things about the Ryobi too. Nice review Adam! 💘
Thanks Alma! They're a little tough to find, but it is noticeably quieter!
You can buy a Ryobi to Makita battery converter for 20 pounds on Amazon doesn't add much size
I get mine today 😁
While not a household name, VonHaus also sells an 18V 23ga pin nailer. VonHaus has been around for a few years now and have several cordless tools that use the same 18V battery. Amazon and eBay sell VonHaus tools.
Thanks! I did not see there version!
It’s 18 gauge
The Milwaukee 23 gauge 12 volt pin nailer is on its way. maybe you can pick that one up since you already have the batteries for it and see what you think
They've been saying it's "releasing next week" since early January, so hopefully soon!
Would love to know your thoughts on it, as well, since it's now available!
It’s out now 👊🏼
Hoping you can help! I bought this pin nailer back in March and yes...I'm just now getting a chance to try it out. I am having nothing but issues with getting the pin nails to go all the way into the wood. I've tried different types of wood as well as sizes of nails and all are leaving the tip of the nail out. I don't see where you can change the pressure on this tool either. I've been trying to troubleshoot this but not having any luck. Some say I need a 4AH battery for power, yet other sites say the 4AH only gives longer battery life, not power. I currently have a 1.5 & 2.0AH batteries and neither are pushing the nails all the way in. Thoughts?
Would of like to seen shooting through different types of solid wood. Maybe some base shoe on the floor to see how it works close to the ground. Also using it on some thin finish trim.
That's a great idea! The new Milwaukee is out now, so maybe I can run back with all three
I have a couple of these and also have makitas 18 gauge that uses the same body type and they works great. note the 18 gauge isn't sold in the United states
I’m not sure why they don’t bring it over, the Makita nailers have a great, compact platform that I find comfortable to use.
Question, does the Makita actually shoot deeper if the depth setting is set all the down? I'd like to see a head to head, my theory is the Ryobi actually will shoot deeper.
The problem is that the pins are so small that you pretty much can't see where the head sits, only the indentation. The only way you could really tell is if it's sitting proud or you shoot through thin stock and figure out how much is exposed.
@@LazyGuyDIY Agree, 10 shots each through 3/4 baltic birch using 1" pins. =). I would do it but I already returned the Makita =)
Great video buddy. I didn't realize tool choice was going to be such a big decision. Especially since battery compatibility is a consideration.
Like kat tools the person using the tool is definitely more important than the tool it self. I’d rather save money and be able to by a larger variety of tool. I have a bunch of Ryobi and Dewalt tools. Honestly you couldn’t tell what tool sinuses in my work. I have put thousands of Brad nails through a Ryobi 18g and no issues at all
I wish Ridgid will make a battery operated pin nailer, I got all Ridgid tools.
Excellent review! Tks.
The metabo is the same as the hitachi because i called them a time for parts and they said it is the same company(metabo, hitachi & hikokki).......they are very powerful but leave the finish surface marred for a pin nailer so from your review the makita is very nice but i will have to stand with the m12 pin nailer which is the best for me, i believe once any cabinet maker use that they won't let it go away from their hands again lol😎going in 2 years now and has never jammed on me yet.😁
Hey Adam. Thanks for making the video. It reminded me that I "need" a battery-powered pin nailer. I have both battery platforms, as you may know. So, whichever comes in at the lowest price point, I'll snatch up.
Ryobi by $50!
Get the Makita, or the M12 if you have those batteries. I've had the Ryobi since the day it was released and not having a depth adjustment is a huge deal breaker. I also have the Ryobi 18ga brad nailer, 18ga stapler and 16ga finish nailer and they are all fantastic - the 23ga not so much.
Well done informative review. Thanks 👍🏾
Milwaukee just released 12v 23 gauge!
Finally! They’ve been teasing it since 2019!
It is $200 for tool only.
I thought Makita can only shoot down to 5/8 size and Ryobi is 1/2. Also can you adjust the depth with the knob on the back for the "air force" on the Ryobi?
💥 Great review. Price aside after all this time would you choose the Makita or Ryobi.??
Honestly... the Ryobi in this case.
@@LazyGuyDIY oh boy. I’m embedded in Makita and I have one on the way.
Hello from Russia !!! I want to order ryobi p318 on eBay - we don't sell one like this .. Tell me, is there a spare firing pin for sale? And how does it behave after a while?
Dewalt 20v has 23G as well.
I bought the Makita. It jammed, and then fell apart the first time I used it. I'm waiting for it to be replaced under warranty,
does yours counter sink? mine doesn't.
I'd buy the Ryobi If I could find a home depot with one!
Interesting you can't choose an order online and ship to home on this tool. I'm surprised actually.
@@LazyGuyDIY Normally you can on HD site but it's crazy, US just doesn't have any anywhere. I was actually able to find a blemished one on Direct Tools Factory Direct which is the only other US Ryobi authorized dealer. We'll see if it shows up, fingers crossed.
I have used both of these professionally and I have tons of Makita tools but in this case ryobi is hands down better. The Makita is lighter , more compact and cooler looking. But ryobi does way better job sinking the nails consistently. Also the Makita has the push tip safety like a regular nail gun and that's not well suited for this application. Now Milwaukee also makes great cordless pinner. Have yet to try DeWalt. Good luck
good review
Why is DeWalt not making one ?
Great question. They have a pro grade pneumatic one that people love. I'm surprised they haven't transition over to battery powered.
👍👍👍
M12
At the time the M12 hadn't come out yet, but the M18 Gen 2 18 Gauge Nailer is great!
Not happy about rioby
Why can’t you show the other one?
Unfortunately, there's some brands I can't contractually work with right now.