FLYSKY FS-i6X & Tamiya MFC-01 Set Up & Calibration
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Hey everyone, In this video I show how to set up the Flysky FS-i6X with the Tamiya MFC-01. I show how to set the Dual Rate and open the switches to operate channels 5 and 6.
Contact me at Teri.Wilde.RC@outlook.com
Instagram / teriwilderc
Disclaimer: Products mentioned in my videos are purely a recommendation based on personal experience with brands or suppliers and I do not receive support or sponsorship from any companies.
#FlySky #Tamiya #RCMovieTrucks
Well done Terri, there is no substitute for listening (and watching via TH-cam) to the words of wisdom, experience and knowledge in action. Your commentary as always explains in great detail the actions involved, and the reasons, that is also important, easy to say .. do this .. do that .. but the why is an important part of learning. Well done, I will eventually understand dual rate .. still a bit of a strange concept .. I don't know why ?? hehe
Well done Terri you have explained the set up procedure so that even a dinosaur like me can understand how to do it. Excellent, I will be using the video for reference when the time comes with my build. Cheers,Pete.
First time i see the i6x sub function in action. It really blown my mind 🤯
Well Teri,you are Wilde. Thank you very much for the video, explanation is second to none. I finally have my Grand hauler all worked out and working amazing. Like Peter said,I'm also a dinosaur lol. 🦕
Glad it was helpful! 👍
Thanks i can learn your video
Awesome!
Explained so simply
You have mad mine make sense
Keep the videos coming
Brilliant , thanks yet again Teri
Hi. I went through the set up (my first MFC-01) as per your instruction. Great
My situation is, that as I go through the motions with the sticks, the truck turns off as soon as I activate one. Any suggestions//?
if it shuts down when you move the steering then the issue would be the servo. the MFC do not like HV, Hi-Torque and very cheap servos, I always use a standard 4.5kg Futaba servo such as the S3003 or the newer Futaba S-U300.
You're the best!!!
Brilliant tutorial Terri thank you 👍
Glad it was helpful!
Hi Terri, do you have any idea why there is no actions (engine sound) after i powered MFC03? Totally follow up your instructions to set up controller and channels.
@brandonyin3288 providing you have plugged J4 J5 J6 and J7 and calibrated the radio to yhe MFC... after you hear the initial start-up beeps when you power it on, you need to pull down on the left stick to Start the engine.
@@TeriWilde I plugged those connectors following controller set-up and plugged my shift servo to my CH5, which is under control after power up. But i don’t hear beep after powered MFC-03. Is it possible that my MFC is broken? is there any way i could refresh its firmware?
The power lamp is on, no fleshing.
Terri can you tell me where to get the 2mm roll pins to fit the return setup on the Flysky fs i6x
@@JohnAttwood-u6s I got them from a local engineering supplier.
HI TERRI, SAW YOU LAST LYDE GREEN TRUCK CLUB, I HAVE BEEN TRYING TO SET UP A FLYSKY FS-I6, TO MY MAN LOW LOADER .I DONE EVERY-THING, SHOWN ON YOUR VIDEO, BUT IT FIRES UP MOVES FORWARD, SOON AS YOU TOUCH THE STEERING IT STOPS, THEN RESTARTS, I DONT KNOW WHAT TO DO, I WONDER IF YOU HAVE ANY IDEA WHAT IT COULD BE ,MANY THANKS, SEE YOU SOON .Ray .
Hi Ray... the first thing you need to do is bind your receiver to your radio with all switches and sticks in the neutral position, that would be knows as Fail Safe. then go thought the calibration process.
I will be at Lyde Green at the May Meet so if you're still having issues I'd be more than happy to help out.
@@TeriWilde HI. TERI. THANKS FOR GETTING BACK TO ME, I WILL TRY AGAIN, WHAT YOU SAID, BUT I HAVE DONE ALL THAT, SO I MIGHT WAIT, FOR THE MAY MEET, AND I HOPE YOU CAN HAVE A LOOK AT IT FOR ME. MANY THANKS AND HAVE A GREAT DAY. CHEERS FOR NOW. Ray.
Thanks mate 👏👍🥃
Bonjour Teri merci encore pour votre travail qui est très apprécié j’ai programmé ma Fly Sky FSI6X avec les vitesses sur la l,interrupteur 3 position j’aime mieux que sur le stick il me reste un petit problème sur les clignotants il fonctionne sur l’éclairage mais j’ai seulement dû son seulement du côté gauche quand je vire à gauche et à droite seulement la lumière pas de son à tu une idée du problème mes salutations du 🇨🇦
bonsoir, si c'est pas trop tard....🙂même problème que vous, recalibrage des manches, puis suivre la procédure avec le réglage du sw1 le trim a fond ! pour moi après manip ...plusieurs 😞cela fonctionne au poil .
When I power the truck up. The transmission turns very slow in the idle stage an control sticks are in center position. Don't know what to do to fix that
You would need to Bind your transmitter with the receiver with all sticks and switches in neutral position.
If your using a esc you need to calibrate it so it knows you neutral and end points.
The MFC needs to be calibrated also.
Hi Terry, your videos are a great help, I have FRSKY Taranis transmitter and I am hoping this will be the same procedure. Have you used a FRSKY transmitter with Open TX and setup a MFC with it?
I haven't used a FRSKY before.
The set up should be the same and the Dual Rate should be set at 75% - 100% for the two channels that control J6 and J7. It's always good to identify which Channels are operated by the Sticks because I found that they can vary between brands.
@@TeriWilde Thanks Teri, I am still getting my head around the FRSKY and Open TX. It does look very similar to what you have done on your TX. I have MFC's in most of my trucks and I use a DX6i but I recently bought a FRSKY Taranis. I have got my head around using it and I think I am now at a point where i can programme it ETC. I set up a Beier SFR1 using SBUS so I must be doing something right. Anyway I want to swap all my trucks over too FRSKY and that search led me to your videos. I cant tell you how much they have helped even when I was setting up the DX6i. Keep up the good work, I think most people out there will be lost without them.
Hi Teri
I have a Mfc-01 which is doing something I can’t seem to stop.
Is there another way I can speak to you about it, I’m in the uk.
Thanks Paul
you can message me on FB messenger if you want.
@@TeriWilde
Hi there, I can’t seem to find you on Facebook 🥴
Hi Terri i have a problem with my mfu01 im using a planet t7. I turn on transmitter it starts up. I then push in the button engine turns off and light keeps flashing so i cant go through the process can you help please. I have also tried a t5 as well but just the same. Thankyou.
Planet T5 and T7 radios seem popular but are very old tech, I would recommend upgrading to a digital radio that has dual rates.
@@TeriWilde i have tried a flysky with same results
Hi terri excellent video helped me huge....but i have no throttle i followed your steps and every thing works but no throttle before i watched the video it was working but no lightd or horn ...now they all work but no throttle
Does the engine rev when you push the throttle stick up?
@@TeriWilde no it doesnt
Does the shift servo come in the kit
No, the 1/14 trucks kits only come with a motor, unless you buy a package deal, and then you'd only gey the cheapest options.
You're always going to be better off buying good servos and radio separately.
Could you link a servo to a SWD for example too have it to work like a on off so you could have the fifth wheel so it could be open and close manually?
yes, With the Fs-i6X; you could use SWD to operate a 2 position servo for the 5th wheel.