I know I'm WAY late to this party but I have one suggestion. You might want to keep an eye on the rings holding the stove in place. We just recently bought an RV that the prior owners had used hot glue to attach some things and when the glue got hot during the summer, it melted to the point that it ran and puddled where it wasn't supposed to be; it also remained very tacky and never quite re-hardened the way it was originally. And, it was a MESS to clean up . . . alcohol and a paper towel, if you're interested. :) Nice job on the build.
You did an excellent job, Really well thought out and the execution is logical and efficient. The fact that it looks like a commercial build is a testament to your skills.
Those Challenger/Lippert doors have leaked for us too. What we've found is that the outside seals can sometimes leak. We cut a small gap in the bottom of the outside seal of the door as a drain. No problems since. Beautiful build!
bro, thanks for sharing your experience. for your water leak, get a dj friend that has, or rent a portable smoke/fog machine, they 70€ new here, set it in one end of your camper, nozzle aiming at the other, turn it on, get out and close the door. 20 seg later, you found your leak. ( smoke-fog comes out)
Nice Job Corbin! I hope a cabin vent will help with the door leak issue. One other thing I noticed with mine is that the window seal at the bottom covered the inside of the weep hole so it wouldn't drain as quickly as it should.
Great video! Tons of great information and well built camper. I really liked the galley/ kitchen layout. Almost finished with my build, headed on the maiden voyage in two weeks. I will have to pick up one of those stickers 🤙🏼
Thanks for the video! It's really useful to contrast your ideas when building the trailer with the reality of your usage over the last year. You didn't talk much about the headboard - I'm stealing the same idea from Escapod so I'm interested in hearing your thoughts. Do you mind sharing the dimensions you used at top and bottom? You went with a single charging station in the middle of the headboard - how did that work out? And what about the LED strip - does it create enough light or do you wish you had a ceiling light as well? Thanks again for posting this. For a future video, I'd love to see a video that just covered your thoughts behind each section. Seeing how you built it is cool but would be nice to hear why you built it in a certain way.
The headboard is about 5" deep at the top and about 6.5" at the bottom. It's almost vertical but has just enough tilt that the door stays shut. Single charger in the center has worked well. The led light bar is great! Nice diffuse light and being able to dim is awesome. I will say it would be nice to be able to have a light that you could shine directly into the cabinets though because with two people in the trailer blocking the light bar, it can be difficult to see in there. Thanks for the video ideas too. I definitely want to make some more content.
there are farrows i think there called sir on those jacks.. a ring that snaps in place.. kinda like snap rings.. just pop it iff that hole jack will pop right off... and leave the welded part on retro fit it with a wheel one...
Great job. Did she stay with you through this? I saw the cool map she gave you so that’s a good sign. Maybe a DIY wedding in the near future? 😉👍 Wishing you two the best.
That's a fantastic build. Interesting thoughts on the need for a wash basin. What do you do for water in the kitchen? Would you ever add solar or a side awning?
We just setup a 5 gallon jug on a picnic table usually and put the basin on the seat and use that as our sink. I have an electric car now that could power the camper for probably 6 months with the amount of power we use daily plus wherever we camp we have shore power. Awning could be nice but the up front cost is pretty steep so I doubt I’d ever get one.
Great job!!!! I totally agree about the sink space. Did you put in an A.C.? I just put down a deposit on a High Camp teardrop. You might find their website interesting.
Thanks Tony, kind words coming from you. I bought your book and it was great information. The drawers do stay put. I don't have a ton of weight in them and that soft close feature seems to be too much for them to overcome just driving with my sluggish acceleration in my Mazda CX-5.
How did you cut the doors out of the cabinets? I really like the design but not sure if using a router or a jig saw is the best way to cut those to retain the grain.. Thanks!
You might want to check the perimeter of the door.. get in , shut the door and have someone shine a flashlight around the door ours leaks at the top front corner
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
Beautiful rig and nice galley design. The PVC slices for the stove is ingenious!
I know I'm WAY late to this party but I have one suggestion. You might want to keep an eye on the rings holding the stove in place. We just recently bought an RV that the prior owners had used hot glue to attach some things and when the glue got hot during the summer, it melted to the point that it ran and puddled where it wasn't supposed to be; it also remained very tacky and never quite re-hardened the way it was originally. And, it was a MESS to clean up . . . alcohol and a paper towel, if you're interested. :)
Nice job on the build.
You did an excellent job, Really well thought out and the execution is logical and efficient. The fact that it looks like a commercial build is a testament to your skills.
Those Challenger/Lippert doors have leaked for us too. What we've found is that the outside seals can sometimes leak. We cut a small gap in the bottom of the outside seal of the door as a drain. No problems since. Beautiful build!
Thanks for the tip, I'm going to have to try that. Luckily I've only towed it once in the rain.
bro, thanks for sharing your experience. for your water leak, get a dj friend that has, or rent a portable smoke/fog machine, they 70€ new here, set it in one end of your camper, nozzle aiming at the other, turn it on, get out and close the door. 20 seg later, you found your leak.
( smoke-fog comes out)
That's a great idea! I might have to try that out soon
Nice Job Corbin! I hope a cabin vent will help with the door leak issue. One other thing I noticed with mine is that the window seal at the bottom covered the inside of the weep hole so it wouldn't drain as quickly as it should.
😊
Very nice camper, congrats I have ordered one like yours for next spring
Very nice build, thanks for the tour!
Great video! Tons of great information and well built camper. I really liked the galley/ kitchen layout.
Almost finished with my build, headed on the maiden voyage in two weeks. I will have to pick up one of those stickers 🤙🏼
Good luck Luke! That first trip is pretty nerve racking to say the least
If only need the wheel on the jack for garage use . They make small dollies with casters or make one yourself.
Thanks for the tips but I ended up welding a caster onto the jack after all.
Nice unit and great commentary.
Great video tour of your teardrop. Thanks
Thanks for the video! It's really useful to contrast your ideas when building the trailer with the reality of your usage over the last year. You didn't talk much about the headboard - I'm stealing the same idea from Escapod so I'm interested in hearing your thoughts. Do you mind sharing the dimensions you used at top and bottom? You went with a single charging station in the middle of the headboard - how did that work out? And what about the LED strip - does it create enough light or do you wish you had a ceiling light as well?
Thanks again for posting this. For a future video, I'd love to see a video that just covered your thoughts behind each section. Seeing how you built it is cool but would be nice to hear why you built it in a certain way.
The headboard is about 5" deep at the top and about 6.5" at the bottom. It's almost vertical but has just enough tilt that the door stays shut. Single charger in the center has worked well. The led light bar is great! Nice diffuse light and being able to dim is awesome. I will say it would be nice to be able to have a light that you could shine directly into the cabinets though because with two people in the trailer blocking the light bar, it can be difficult to see in there. Thanks for the video ideas too. I definitely want to make some more content.
apply sealant outside of the door frame and alum wall . had the same issue and that was where my leak was from
You can pop the big snap ring and change the jack, I just changed mine.
Very niice! Love your cabinetry!
Such a cool camper!
Thank you!
Great job on the camper. Thanks for the insight.
there are farrows i think there called sir on those jacks.. a ring that snaps in place.. kinda like snap rings.. just pop it iff that hole jack will pop right off... and leave the welded part on retro fit it with a wheel one...
Great job. Did she stay with you through this? I saw the cool map she gave you so that’s a good sign. Maybe a DIY wedding in the near future? 😉👍 Wishing you two the best.
That's a fantastic build. Interesting thoughts on the need for a wash basin. What do you do for water in the kitchen? Would you ever add solar or a side awning?
We just setup a 5 gallon jug on a picnic table usually and put the basin on the seat and use that as our sink. I have an electric car now that could power the camper for probably 6 months with the amount of power we use daily plus wherever we camp we have shore power. Awning could be nice but the up front cost is pretty steep so I doubt I’d ever get one.
Really nice job
Great job!!!! I totally agree about the sink space. Did you put in an A.C.? I just put down a deposit on a High Camp teardrop. You might find their website interesting.
Nope, no AC. The fan pulls in plenty of cool air at night for comfortable sleeping.
Beautiful Job
That looks great! As a fellow CT native in the planning stages of my own teardrop; what challenges were involved in titling / registration?
I do not know what model of front jack you have. The one I have (Welded to front as well) allows you switch out the tong plate with a wheel.
This is dope!
Great job! She's a classic. Do the drawers stay put while on the road?
Thanks Tony, kind words coming from you. I bought your book and it was great information. The drawers do stay put. I don't have a ton of weight in them and that soft close feature seems to be too much for them to overcome just driving with my sluggish acceleration in my Mazda CX-5.
@@TheIoniqGuy Being kind is when I offer you a cold beer in camp. I'm just stating the facts. -Happy camping!
@@tonylatham5915 Hay Brother how you been small world
How did you cut the doors out of the cabinets? I really like the design but not sure if using a router or a jig saw is the best way to cut those to retain the grain.. Thanks!
You might want to check the perimeter of the door.. get in , shut the door and have someone shine a flashlight around the door ours leaks at the top front corner
That's a great idea, I'm going to have to try that. Thanks for the tip
I am wondering where you got your trifold mattress at, and will it fit a Little Guy 5 wide trailer.
Very nice. It looks like you used filon as a skin. What adhesive did you use and have you had any delamination issues ??
I didn’t use any adhesive. It’s floating and is being held in place by the silver trim around the edges.
Nice build. No concerns about running the gas line under the trailer? Maybe catching it on rocks or other terrain?
Not really. I don't off-road and it's tucked up higher than the frame in most parts.
Looks great!
Very cool build! At 6’2” are you able to sleep fully extended in it?
I have just enough room lengthwise. Any taller, I'd have to sleep diagonally
Liked and subd thanks
We're did you get the tri fold?
I like it . How heavy and can pull it with a 2018 Elantra car ?
About 1200lbs. Idk what the Elantra can tow
How much does it weigh?
About 1200lbs