Great video as expected form u As expert person who flown with ikon and vbar, I was wondering what’s different between those and which one is your favorite and why
Thank you! I greatly appreciate that. I am going to make a full video going over both systems and the differences. But! My main things that I like more about the bar than icon is the integration number one. The integration on the bar is unmatched from any system on the market today Number to the simplicity. The ease of set up on Vbar is just amazing! You can set up a complete helicopter in five minutes, no cables, no computers everything just done and ready to fly. And the Heli flys better on Vbar. A lot more connected and solid feeling in the air.
Iam using vbar pro/rescue and Iam using a hobbywing 80 V3 and I have updated the software to the latest vbar software for the hobbywing and Iam not getting g the battery telemetry any ideas what I could be doing wrong or does the hobbywing 80 v3 not support it
Thank you! It’s time consuming but well worth it. I use heat shrink on all my wires. 3/16in is the main size I use and I also use 3/8 and 1/2in. I also cut and shorten all the wires and crimp new ends to get the cleanest wiring possible.
Hello Jeff, I am using the VBCe with Vbar Gov mode and have a HW 150 V5 esc. I have all my pro apps loaded and checked and no matter what I do, I cannot get the HW icon or the Fixed Battery icon to show nor can I set anything up without these items not being recognized. Have any ideas why this is happening?
@@westhobbiesrc8051 I have the Vbar Evo Pro Addition software installed. Yesterday When I turned on my radio, I received an automatic message saying there was an update. I updated to Firmware 7.1.154 and when I did, the Pro Rescue icon showed top on my main menu. I proceded to install it per your video. The only other icon on my main menu bar is the Pro temperature. The HW 150 V5 comes updated from the factory for the Vbar ready to use out of the box unless there has been an update to it. I have all my basic setting installed on my new heli, but I just can't seem to get the battery I.D., Battery Telemetry, and HW icon to appear on my main page because there is no place in my menu to select it. I even installed the wire (ESC to Vbar Neo) and it didn't help. I am not sure that a wire connection is even needed for the Evo. My telemetry menu in the Evo doesn't look like the menu for the Vbar Touch menu in the video on Mikado's Vstabi website. I even posted a call for help on HeliFreak in the Mikado Vbar Control forum and not much has resulted from that. The subject title for my request is VBCe and my handle is Willyboy. I am out of mind trying to figure this thing out. I appreciated any help you can offer very much.
@@westhobbiesrc8051 Thank you for your reply. I am using the Vbar Evo Pro Rescue software. The only Pro Icon that I had on my main menu until yesterday's new firmware update (7/16/24) was the Pro Temperature icon. After doing the updated yesterday to Firmware 7.1.154 the Pro Rescue icon appeared on my main screen. I then proceeded to program it as per your vide. My HW 150 amp V5 esc came ready to use right out of the box for the Vbar. I even installed the connecting wire (ESC to Vbar Neo) as per your video without any results. and I am not sure that cable is need for the Evo using the HW 150 V5 version. I do not think there are any updates to the V5 version to my knowledge. I watched the video on Mikado's VStabi website many times concerning the Pro telemetry software. My Pro telemetry on my Evo doesn't have the same information the video shows using the Vbar Touch. It is different and not the same as on their website. I even posted a call for help on HeliFreak under the Mikado Vbar Control forum. My subject line was VBCe and my handle is WIllyboy and so far, not much has resulted from my plea. Under Archives when connected to my Evo, I see battery but it is grayed out. When I disconnect from the Evo it is available to click on and when I do click on it a blank page appears with nothing in it. Any help that you can offer will be greatly appreciated.
@@westhobbiesrc8051 watching from London here love your videos. I’m a mikardo user (vtouch with Evo) want to know more about expo / agility - how to have more dead stick at center but still perform when requested
@@ThomasColeman thank you for watching! Great to know I’m seen in London! Yes, I’m working on a full tuning as well as advanced feature video on the Vcontorl. Should be out soon.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
Good video. In case others try the 60 amp ESC the mah used does not work. I was told needs to be 80 esc and higher.
correct
Yes, unfortunately the 60 amp hobby wing does not support milliamps consumption, but you had all other telemetry. You can still set voltage.
I have that setup on a RS4 with a 60 amp. Been trying to figure out how I can shoe horn my 80 amp in it.@@westhobbiesrc8051
Not directly called out but I'd also consider the Santa VControl theme critical to the setup as well!
I was going to change it after Christmas but decided to keep it! Lol now I’m going to change it to the new Dragon scheme.
@@westhobbiesrc8051 Updated my radio last night. Both are great!
Nice video, some feedback though is to lead with making sure telemetry is activated lol…wasnt working for me until I did that lol.
Great video as expected form u
As expert person who flown with ikon and vbar, I was wondering what’s different between those and which one is your favorite and why
Thank you! I greatly appreciate that. I am going to make a full video going over both systems and the differences. But! My main things that I like more about the bar than icon is the integration number one. The integration on the bar is unmatched from any system on the market today Number to the simplicity. The ease of set up on Vbar is just amazing! You can set up a complete helicopter in five minutes, no cables, no computers everything just done and ready to fly. And the Heli flys better on Vbar. A lot more connected and solid feeling in the air.
Do you leave it on hobbywing governor or switch it to hobbywing /Vbar governor? Or is that personal preference ?
I run Vbar governor but I’m making a different video on the governor setup.
Iam using vbar pro/rescue and Iam using a hobbywing 80 V3 and I have updated the software to the latest vbar software for the hobbywing and Iam not getting g the battery telemetry any ideas what I could be doing wrong or does the hobbywing 80 v3 not support it
What kind of servo wire covering are you using. Love your wiring on all your builds
Thank you! It’s time consuming but well worth it. I use heat shrink on all my wires. 3/16in is the main size I use and I also use 3/8 and 1/2in. I also cut and shorten all the wires and crimp new ends to get the cleanest wiring possible.
Thanks for the reply and keep up the great videos
Hello Jeff,
I am using the VBCe with Vbar Gov mode and have a HW 150 V5 esc. I have all my pro apps loaded and checked and no matter what I do, I cannot get the HW icon or the Fixed Battery icon to show nor can I set anything up without these items not being recognized. Have any ideas why this is happening?
Hey Robert, what software is in your Vbar NEO/EVO? Must be pro or pro/rescue to get telemetry. Is the Hobbywing updated to Vbar firmware?
@@westhobbiesrc8051 I have the Vbar Evo Pro Addition software installed. Yesterday When I turned on my radio, I received an automatic message saying there was an update. I updated to Firmware 7.1.154 and when I did, the Pro Rescue icon showed top on my main menu. I proceded to install it per your video. The only other icon on my main menu bar is the Pro temperature. The HW 150 V5 comes updated from the factory for the Vbar ready to use out of the box unless there has been an update to it. I have all my basic setting installed on my new heli, but I just can't seem to get the battery I.D., Battery Telemetry, and HW icon to appear on my main page because there is no place in my menu to select it. I even installed the wire (ESC to Vbar Neo) and it didn't help. I am not sure that a wire connection is even needed for the Evo. My telemetry menu in the Evo doesn't look like the menu for the Vbar Touch menu in the video on Mikado's Vstabi website. I even posted a call for help on HeliFreak in the Mikado Vbar Control forum and not much has resulted from that. The subject title for my request is VBCe and my handle is Willyboy. I am out of mind trying to figure this thing out. I appreciated any help you can offer very much.
@@westhobbiesrc8051
Thank you for your reply. I am using the Vbar Evo Pro Rescue software. The only Pro Icon that I had on my main menu until yesterday's new firmware update (7/16/24) was the Pro Temperature icon. After doing the updated yesterday to Firmware 7.1.154 the Pro Rescue icon appeared on my main screen. I then proceeded to program it as per your vide. My HW 150 amp V5 esc came ready to use right out of the box for the Vbar. I even installed the connecting wire (ESC to Vbar Neo) as per your video without any results. and I am not sure that cable is need for the Evo using the HW 150 V5 version. I do not think there are any updates to the V5 version to my knowledge. I watched the video on Mikado's VStabi website many times concerning the Pro telemetry software. My Pro telemetry on my Evo doesn't have the same information the video shows using the Vbar Touch. It is different and not the same as on their website. I even posted a call for help on HeliFreak under the Mikado Vbar Control forum. My subject line was VBCe and my handle is WIllyboy and so far, not much has resulted from my plea. Under Archives when connected to my Evo, I see battery but it is grayed out. When I disconnect from the Evo it is available to click on and when I do click on it a blank page appears with nothing in it. Any help that you can offer will be greatly appreciated.
awesome thanks. i will order all this stuff i need xD
Hi Jeff, Why not Vbar gov instead of HW gov?? or do you make another seperate video from this??
I’m making a different Governor video but I run the Vbar governor, I find it works better and smoother with the Vbar.
Looking forward for the separate Gov video between HW and Vbar gov. Regards from Netherlands
Can you do a video showing EXPO ?
Sure! In general or on a specific radio/FBL?
@@westhobbiesrc8051 watching from London here love your videos. I’m a mikardo user (vtouch with Evo) want to know more about expo / agility - how to have more dead stick at center but still perform when requested
@@ThomasColeman thank you for watching! Great to know I’m seen in London! Yes, I’m working on a full tuning as well as advanced feature video on the Vcontorl. Should be out soon.
@@westhobbiesrc8051 always watch your videos ! Wet and raining here hopefully your video will be posted soon I need more helicopter content to consume