How To Wire A Hobbywing ESC To Get Telemetry With iKon/Brain FBL
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- In this video we go over how to get telemetry with a Hobbywing ESC and iKon/Brain FBL.
how to wire. Spektrum SRXL2 • How To Wire A Spektrum...
Want to support me? Here is my patreon! patreon.com/us...
Want to do a one time donation?here is my PayPal!
Choppers992@hotmail.com
Want me to build your heli? Need one rebuilt or setup? Want to send something to the channel? Send me a email!
westhobbiesrc@hotmail.com
Thanks for creating this video!! Building my first SAB RAW 500 with Hobbywing 120, iKON2, and Spektrum NX8. This video is really helpful and great the a video you created almost a year ago is still helping heli pilots navigate this stuff.
Thank you for watching! I greatly appreciate it and I’m glad this video helped you out!
@@westhobbiesrc8051- When you built the SAB RAW 500 with Hobbywing 120A, what "flight mode" do you set the ESC to? For this video looks like you are using "Helicopter (Elf Governor)". Thank You!
It's always good to have these videos, had to do factory reset and one thing I missed out when going back through the config was selecting ESC type, "very annoying" went flying & no telemetry, got home checked everything and watching this reminded me I hadn't selected Hobbywing ESC 😁
Awesome! I’m glad the video was helpful and you could get your problem fixed and get telemetry! Thank you for watching.
Thank You! I have been waiting for you to do this video for months now. You are the only one that have done this in this much detail. I now have to go back to my Helis and rework the wiring. You make the most informative, how to, heli videos out there. Keep it up. Thanks again.
Thank you! I appreciate it, I try to make the most helpful video I can. I want everybody to learn and succeed in this wonderful hobby!
Lol, there are manuals that explain everything and Brain software is very clear and detailed with popup bubbles on everything you have a question about.
Thank goodness we have ppl like WesthobbiesRC that use their time to make good videos to help others.
Your comments we can live without.
Everyone don’t have the knowledge it takes to interpret those bubbles.
@@PaulTAdam read a manual, 3rd grade education
@@PaulTAdam oh amd lets face, the only good these youtubers are doing is for views, or this case, free stuff from vendors and promoting his website to sell stuff on.. its not like he is a bleeding heart doing this for charity, lol
Lovely vid. I dont have to do any of this stuff but i stayed for the informative content.
Great stuffs!
Thank you! I appreciate you watching and hope your learning!
it is now 10 months later. And now I need to do this stuff! @@westhobbiesrc8051 😎
Great info , i need to do this for all my birds.
Thank you! It’s very useful!
Great video! I would have never come up with this. I thought we had to use the single rpm wire from the ESC. What is that good for? you haven't connected it to anyting. We only use the throttle wire and the special single cable from the P port...
Edit: Correction: the rpm wire of the esc goes to the Governor input of the brain 2
The single rpm wire is for governor. So that will plug into the RPM port. If you’re not gonna use the FBL governor, you do not need it but you will lose your RPM telemetry so it is always good to just plug it in.
Question: I have a 200amp Hobbywing HV OPTO ESC, on the package it says it's for a 700-800 size heli. Purchase it about 2 years ago not knowing a lot about electric helis. Now I just finished a Specter V1 700 heli and will mount the OPTO ESC in it along with an IKON FBL and a XNOVA motor and 12s lipo. I'm almost certain that all I need to do is plug the ESC Red, black, and white wire into throttle channel and the single wire into the governor port of the IKON. Then add a 2S lipo battery to power servos and FBL system. Just want to make sure I'm not going to smoke my ESC on maiden. Thoughts on OPTO ESCs.
Yes OPTO is no BEC in the ESC. So you will wire the ESC like normal, into CH1 and Yellow RPM wire into the GOV port and run a 2s Lipo for your RX/servos. You got the wiring right. So OPTO ESCs are great for helis that needed a big power load or like a speed heli but on any regular 700 a Regular Hobbywing ESC is better and less wiring and no second Lipo for servos. Years ago the BEC in the ESC where not strong enough to supply the power needed and that’s when OPTO ESC became popular. Now the BEC Are great.
I have the same ESC and FBL for my Kraken 580.. why have I not done this yet? Thanks for the video
When you was talking about the BEC power back up cable with the 2 plugs,you said you tie both up,it saves a port. Do you mean you put the single yellow into the red+brown plug?
Yes sir, I put the yellow RPM wire into the Red and brown plug and plug that into the Governor port.
Great video. Mine doenst say P, but has a symbol on the port. Its a Platinum 150 Pro V5, but i guess its the same deal
Thank you for watching. Yes it will be the same.
hi man . 1st thanks for the videos its helpful for us .
2nd do u have an idea about if ikon with hobbywing v4 esc if i can make the telemetry work or ikon dose not have a telemetry like ikon2?
i have ikon2 with hobbywing v5 and i fallow your video and every thing work perfect .
Hello! Thank you for watching! I greatly appreciate it. Unfortunately ikon Gen 1 does not support telemetry. Only iKon 2.
Great video, it really helped. Question, my Tx is showing max volts same as the flight pack volts while min volts shows 0. Have you seen that?
I calibrated first time, then by mistake
I connected the 6s while the stick on the top position, then the calibration I think messed up, now every time I connect the battery doesn’t giving me the same tone counts
I used to hear 4 tones now only 3
Is there away I can recalibrate the unit?
How to factory reset?
Thank you
So I have a HW 200 did everything you have shown. However my RPM is not showing on the transmitter which is a IX20. Everything else is, temp, voltage, etc. just after spooling up the RPM reads zero. This is on 2x HW200 ESCs. My 120 and 150 are showing the RPM just fine.
Hmm! That’s strange. Try going under the RPM telemetry page in the radio and re-find the packet and see if that fixes it. Is it showing RPM in the software?
@@westhobbiesrc8051 Yeah I tried rebinding as well and no luck. But I haven’t tied spooling up all the way yet. Just turning it on for a couple of seconds and switching hold back on. Just on the 120 and 150 it showed the RPM as soon as I hit throttle hold off. What do you mean rpm in the software? The ikon software?
Thanks brotha for the video!
I have mine all set up correctly according to video and get Receiver volts and rpm but no main battery voltage. Bummer maybe because my radio is a DX9 Black series which is older than the NX ? I do get pack voltage on my airplanes though. Is there a place in the Brain software you select what telemetry you want or is it all always provided?
Thank you for watching! You should definitely get telemetry pack voltage on your DX9. I just set up a Kraken 580 with a hobbywing on a DX9 and got all of it. Try rebinding and seeing if it picks up that telemetry packet. You are running a SRXL2?
Maybe DX9 (black) and DX9 G2 provide different data…
Hi. What exact RCProPlus connectors do you use between ESC and motor. It is hard to identify online.
Hello! I run the S7 solder connectors. You can get them in both solder and solderless.
Does this work for the align 130a esc that comes with the align tb70
I’m not sure, I’ve never messed with a Align 130 ESC. It’s basically a Hobbywing so it should!
Works with platinum v5 150a? The 3-8s one?
Yes, exactly the same
@@westhobbiesrc8051 booooy nice
@@westhobbiesrc8051 great mate,
Which gov should I use and how to wire it?… the channel 5 on Esc fan port cheat I already did but no telemetry damn
I just made up the same wire and hooked it up just like you did but my IX14 still isn't showing me the pack voltage, the only voltage it will give me is the BEC voltage.. I am using a Avian 130 esc with a Brain 2 on my RAW 580.. Any tips or anything? Thanks
Excuse if I’m wrong but Avian esc aren’t exactly like god made for the spektrum radios? I have seen in other creators videos that spektrum radios (well at least the new ones haha) have an already design page for avian esc telemetry. I don’t know if you also need to use smart batteries
My telemetry was working ok. I updated esc and no more telemetry. Went back to PL-04.0.10 and got working again
First!
Notifications on!