I am just a fan of kev and his content . bin arou d for a better part of ten years now . hes acomplished so much im proud of him . huge fan great build . good luck to all .
Got me a new 3D printer. Ordered 2kilos of PLA. Bought the M-Jet plans. About halfway done printing all the parts. i am doing the "sprint" but i have the "super-sprint" plans as well. i can't even wait to run it!
I got a couple boats printed. Does anyone have any idea what hose or tubing to use for the top deck seal?? I have some vinyl tubing the correct size but it's way too hard to put the top deck plate using it.
You kindly 3d printed a fixng plate for my optima FOC. How random to stumble upon this vid. thanks again for that. Subscribed. Good luck buddy 🤙🏻The boats look fantastic
I was wondering if you could slice up the smallest haul for the a1 mini in Bambu slicer because I don’t want to buy the files and them not fit on my printer?
Sorry Andy, Had to give up after 6:30, Music way too loud, But I am also not a fan of videos with filler music in general, Unless there is complete silence on screen at that time etc. But I have subscribed none the less :) Glad Kev showed more respect to the one you gave him, than the one he bought at least.
Amazing video now subscribed to your channel I was looking into getting a 3d printer but definitely want to get one after seeing this video. Do you have any recommendations for a mid range 3d printer that would be able to print the boat in the video
Hey, did you see his M-Jets new design? The Supersprint? It should be there for you as a free update. Check THAT out and please build it and compare it!!! THX
Ah, I see them. Where did you get the hardware? Thanks for this, someone needed to do this badly. With this tutorial, the music is super loud and can't hear your voice for the details. Is there any other instructions please?
where did you guys get the tubing for the top seal?? i cannot get mine to fit the top if i put in the tubing i have. i lubed it and everything. i have built 2 of these little M-Jet boats. i just cannot find the correct tubing to use for the top seal.
Very Nice build for normal people. but this is not content ala kev talbot. to scale up the content that fits this boat a bit I have a challenge for u. adjust the scale of the parts to fit yourself. Cut the parts even further into pieces to print them on a basic 3D printer so that everyone can use your video to print a 1-person speedboat for themselves. I wonder if you dare to take up the challenge. At least you're crazy enough for it 😅
Thanks for the shoutout! Looking forward to seeing what you perform with it.
It's the creator of this build here !!🎉
No worries dude, Will be doing super sprint at some point
please!@@RCANDY195
Awesome build.
Don't let Kev near it, he will try to jump it off a 100ft waterfall while it's on fire, and then say "oh what happened?"
😂
Lol 😂👍
tumble-wumble.
lol, Yea should be fun though
really pleased to see you doing the M-Jet 's been following for a while and dreaming of owning one.
Wow. What a treat watching this all come together. Very nice! 👍
Glad you enjoyed it
Thx for the amazing video!!Damn cool Mark‼️
Glad you liked it!
I am just a fan of kev and his content . bin arou d for a better part of ten years now . hes acomplished so much im proud of him . huge fan great build . good luck to all .
Thanks for the ongoing support for all us Rc people
got to love those core x y printers.
Got me a new 3D printer. Ordered 2kilos of PLA. Bought the M-Jet plans. About halfway done printing all the parts. i am doing the "sprint" but i have the "super-sprint" plans as well. i can't even wait to run it!
I got a couple boats printed. Does anyone have any idea what hose or tubing to use for the top deck seal?? I have some vinyl tubing the correct size but it's way too hard to put the top deck plate using it.
@@mikehensley78 in the video he says to use nitro fuel line
awesome, love the world of 3d printing nice work Andy
thanks buddy
Yeeeah awesome...more boat stuff kev !!
Awesome. Just bought all the files to build mine. Have 3 bambu carbon x1’s with the ams. So they’ll all being working at the same time lol. 👍🏻🤘🏻👏🏻
you are working with great people! whereas you are the greatest person because you are a creator 💪💪💪
Thank you so much 😀
Aye mate! I was hoping you were making a vid about these! Thx for the detailed look as usual
No problem!
Really nice jet boat great job 👍👍
cheers dude
Great video. Hadn't thought of 3d printing a boat.
BTW you music level is a bit high around the 8 minute mark.
Thanks for the tip
You kindly 3d printed a fixng plate for my optima FOC. How random to stumble upon this vid. thanks again for that. Subscribed. Good luck buddy 🤙🏻The boats look fantastic
Ah yes I remember, such a small world. hope it worked all good for you
Awesome craftsmanship 🤙
Thank you
real nice boat I have to get my printer back going so I can print some of those.
yea you defo should
is it just my you tube as i cant here you talking over the loud backing music playing over you ??
I couldn’t hear him over the music either
yea sorry for that will get it better in the future
@@RCANDY195 No problem just wanted to let you know
I was wondering if you could slice up the smallest haul for the a1 mini in Bambu slicer because I don’t want to buy the files and them not fit on my printer?
We want to see Kev drive this please. Me and my two boys want to give building one a go . 👍
yea will be at some point soon
Cant wait to see the run.hey kev whats up
Awesome vid buddy them boats look so kool
Thanks 👍
Sorry Andy, Had to give up after 6:30, Music way too loud, But I am also not a fan of videos with filler music in general, Unless there is complete silence on screen at that time etc. But I have subscribed none the less :) Glad Kev showed more respect to the one you gave him, than the one he bought at least.
Can i use a regular brushless motor and esc from a car?
you would need to water cool it some how
Amazing video now subscribed to your channel I was looking into getting a 3d printer but definitely want to get one after seeing this video. Do you have any recommendations for a mid range 3d printer that would be able to print the boat in the video
I can't seem to find the 5mm OD tubing you suggested for the seal anywhere online
All you need is nitro fuel tube with outside diameter of 5mm
Can you recommend a suitable Servo? The ones I have on hand here the servo horn doesn’t fit the steering rod
I was using a mini savox or any 9g waterproof servo
Is there a reason why you didn’t vapour smooth the abs parts. Makes them stronger and gives a nice gloss finish
That's new to me I will have to look into it
When are you going to start printing motors and esc’s? lol. Great video Andy. Do you think Kev will lose or wreck it in the first video or second?
ah we will see mate, I told him to do what he wants with it
Andy what is your rally petrol like on grass?
Will be doing a video on that at soem point soon dude
Where did you get the stand for the boat?
It comes with the files, Its in the Mods section
Great Vid , all the Files all ready Available ?
Yes they are, If you watch my current build there is a link there, But now you get both boats in the files
Will a adventurer 4 3d printer work
Most printers will work yes as long as your print bed is 210x210x210
do you have these for sale
nice to see people building stuff.. under cut everyone as the Hobby is a little expensive
can you give me the boat program.
Why don’t you use melted in nutserts??? Such a cleaner more satisfying build process.
I do in some of the builds, Will be using them more often now
Nice work
Hey, did you see his M-Jets new design?
The Supersprint?
It should be there for you as a free update.
Check THAT out and please build it and compare it!!!
THX
I am in the process of building and filming that one now :)
Sweet little boat but wasn’t able to hear what you was doing through the music playing! I can hear Kev now oh Tumble Wumble
What computer do I need to use
Any, You only the slicing software. I use Bambu lab
Where is the build files?
they should be on the link to the page, You will have to buy the files on there
Ah, I see them. Where did you get the hardware? Thanks for this, someone needed to do this badly.
With this tutorial, the music is super loud and can't hear your voice for the details. Is there any other instructions please?
@@thegooserider7245 all of the hardware comes from Amazon
Cheers Andy, any chance you can supply the links please?
Hay dode whare can i get the files?
How can I buy a boat
I think you can now if you join the M-jet facebook page and ask in there
For a second I forgot the printing was a timelapse 😂
where did you guys get the tubing for the top seal?? i cannot get mine to fit the top if i put in the tubing i have. i lubed it and everything. i have built 2 of these little M-Jet boats. i just cannot find the correct tubing to use for the top seal.
How much do you charge for a build?
I would have to speak to the owner of the files first to see what we can work out
NIIIIICE 👌🏻
Not easy to hear what you say when you mount it. The music is to loud.🧐
I can’t hear what you are saying over the music 😢
my thoughts also i am building one and the music just drowns him explaining what hes doing
When's the speedybee video
You Should of built the new updated super sprint.
I am in the process :)
Why don’t you make and sell them ?
Shame the music was too loud, i couldn't hear the instructions.
Yea I have learnt how to do it now lol
Hello, I can't buy the model. The fact is that I live in Russia, what should I do?
Very Nice build for normal people. but this is not content ala kev talbot.
to scale up the content that fits this boat a bit I have a challenge for u.
adjust the scale of the parts to fit yourself. Cut the parts even further into pieces to print them on a basic 3D printer so that everyone can use your video to print a 1-person speedboat for themselves.
I wonder if you dare to take up the challenge.
At least you're crazy enough for it 😅
Give me the links
Music drowns out the voices :(
6:20 we can't understand a word you're saying because the music is louder than your voice. What a shame.
Any one needs the files there on a discord group
$10 to $27 in a few hours :/ Downloads must be busting!
Now 34$ :/
whats with the stupid loud music over what your saying??
Sorry, For some reason when I play it back it not that load so I will have to investigate
I like your video and I subscribed so can I get a Free rc car ❤❤❤❤please