Make sure to comment down below your favorite model of crane, whatever receives the most votes will be what I base the 3D model off of. Thank you so much for watching, you guys seriously rock!
Great Video! I can't wait to start printing all your rc projects! I would also love to see a capable forklift design. But for the crane I would love to see a model like the Liebherr LTM 1200.
This is fantastic I was looking for something that I could do for my son to understand what I do haha, as someone that builds roads for a living I would say you need: * Grader * Roller (multiple types) * Hammer attachment for the excavator * Franna (mobile crane) Keep up the good work. Cheers
What a great model! thank you so much! I ended up making my own PCB from a perf board to get up and running quicker. ended up using some 18650 I had already and a BMS for max run time haha. My 3 Years old is loving it so far. One change I made to the code was to initialize the Trim with -6 (3 clicks left) and I also have the trim buttons being disabled 30 seconds after boot. My son kept hitting the bummers on the xbox controller on accident which would eventually jam the servo and burn it out, went through 2 servos but since the change the replacement servo has been running strong. The PCB for the excavator comes today which is all I need to get it going, currently printing the trailer. Thanks again!
I’m so happy to hear you’re enjoying the models! Also sounds like you’ve made some improvements for your situation which is awesome! I hope the excavator build goes smoothly and that you(and your 3 year old) enjoy it as well.
A thought for optimizing the printing topology, making the 'lip' of the dump bed a separate piece, would cut out the need for almost all support structures there, as well as remove the need for the weird tilt on an A1 or similar bed sizes.
Awesome build! Your alterations on every move you make are really thoughtful and creative. Probably very complicated but this is my favorite lg1750 liebherr, because it builds the windmills.
That's a huge improvement in performance, nice! One thing I'd like to see is some space dedicated to installing a camera module, since those ESP32s can be used to build FPV models (I've done something like that with a 1/50th scale toy RC car and it's been more fun to FPV it around the house than I'd originally thought). I can imagine your models being a lot more fun in FPV than a simple racer.
Love the new build, I recently built the RC excavator and it works great. The only thing I did not like in the entire build were the screws, these 2.6 screws were a pain to source in my country and they fell out multiple times, maybe the one I received were not the correct size and they were inconsistent, it would be great if your builds use standard M3 or M2 screws with M3/M2 heat inserts, they work really well with 3D printed parts and are easily available even locally.
@@professorboots I just made a miniskidi. And I used M3 screws and heatset inserts practically everywhere (thanks for the step files). It's an easy mod and absolutely worth the extra time.
If burning up the track motors becomes a problem, you might consider adding a sensor of some sort, be it an encoder on the motor itself or a current sensor on the motor output, to detect stalls and cut or reduce motor power. Alternatively you might stick thermistors on the motors and detect an overheat instead. Nice to to see the dump truck scaled up!
Definitely one of the 4 wheel - 4 wheel drive & 4 wheel steer cranes with a telescoping boom. A Rough Terrain Crane - google it I'm telling you they're pretty sweet. Especially for outdoors fun, like u realized is so much fun with the upgraded MiniDump & that sweet Excavator u designed. Could even do a deviation in the build process to allow for it to be made into a telescoping forklift iteration instead of a crane. Heck I'd make one of each, that's what I'd do. Potentially increasing ur circuit board & other parts sales for you to boot, Professor Boots.
When loading a dump truck with a excavator you actually make a bench on top of the pile of material and load the truck by digging up the bench. Much faster!
What program do you use for designing everything? Is it free? Please tell me. I wanted to make my own construction vehicle a, tractor scraper but with a large dump truck bed, and where do you buy all your motors and which ones for different torque and speed,thanks!😊😅
Love how creative you are, I'm not sure what designs are available, but the one from terminator 3 would be good, and could maybe support wrecking ball attachment.. 😊
Hey, I love it, and I thing I will made it, but how color of filament did you use? I thing it's bambu labs filament, but I don't know which exact color it is
Could you make a Liebherr LR13000 crane, with counterweights at the back and a working articulating arm? Maybe it could use string to operate the arm so that all of the motors could be mounted lower for a low center of gravity?
What if you increase the price of all of them but prebuilt and in a prebuilt section of your store so essentially it’s a second product but same thing and prebuilt
"öaf 19.403 hk ad" ein Lkw mit Kipp Funktion und Heckkran. Der Kran hat diverse Aufsätze wie hacken, erdgreifer und weitere. War ein riesen spaß den zu fahren und wäre cool diesen spaß auch weiterhin halt im kleinen haben zu können.
hey mate just making a suggestion to increase how well it drives maybe if you make it into a swivel chassis or have one of the axles on a hinge like a tractor it would be able to articulate over small bumps
AMAZING VIDEO!! I am so inspired, but there are two questions that i still have, what is the difficulty in making them(skidsteer, dumptruck and excavator) and what is the total or individual price for the electronics?😁
They range in terms of difficulty, with the skid steer and dump truck being pretty easy. The excavator is a little harder because there’s sooo many moving parts. Cost also varies depending on where you get your parts for example if you order everything on Amazon it could be up to 100$ versus ordering some stuff through aliexpress which could bring it down to 40-50$
The interesting part about scaling the dump truck is that IRL most of those trucks have electric motors in each wheel. I'm surprised you didn't just do that for the rear wheels after putting motors in the front wheels.
Hey your such an inspiration! I have been getting into robotics, electronics and 3d printing, do you have any tips to how I can learn the type of stuff you do? Thanks!
Hello. I have a problem with the firmware. This is a mini dump project. When power is applied, everything works, but as soon as I try to turn the wheels, the servo scrolls and does not respond to control. Can you catch up?
I just went through and watched your excavator video as well as this one, epic stuff! I'm excited to print and build both of these models. One question though, how much does it cost to buy all the different motors and wiriing (excluding the ps3 controller as I already have that)? I'm planning on paying for the workshop membership to put it together but want to wait until I have the models printed.
Hey Prof Boots, please can you make the code compatible with other esp32 like the (ESP32 Cam Module) please. I know it has less pins but you could make a pulling truck (like the Oversized Load pulling Truck) please 🥺
Make sure to comment down below your favorite model of crane, whatever receives the most votes will be what I base the 3D model off of. Thank you so much for watching, you guys seriously rock!
You’re making a crane! Lets gooooooooooooooo
Make a large mobile crane or a tracked version.
@@cfffarms2727 agree
@@cfffarms2727i was thinking a fire truck
I was thinking a forklift
This is, by far, one of the best 3D printing series on TH-cam
Oh thank you that’s very nice
Most definitively, I check back quite regularly.
Great Video! I can't wait to start printing all your rc projects! I would also love to see a capable forklift design. But for the crane I would love to see a model like the Liebherr LTM 1200.
Ohhh you can definitely expect to see a forklift here soon
Let’s get a telescoping crane!!! Love the series.
I’ll add it to the list!
Definitely! I'm voting for a Rough Terrain Crane.
@@professorboots Pls pls make a care❤❤
Amazing video as always. Now we need a bull dozer or road grader next!! Keep this series going!
I’ll add them to the list!
@@professorboots komatsu D355A
Man I always love it when Professorboots has a new video :)
Haha stop you’re making me blush!
@@professorboots :) lol
We might not want one at 72cm long. Doesn’t mean we don’t want you to make it that size! ;)
This is fantastic I was looking for something that I could do for my son to understand what I do haha, as someone that builds roads for a living I would say you need:
* Grader
* Roller (multiple types)
* Hammer attachment for the excavator
* Franna (mobile crane)
Keep up the good work.
Cheers
Tower cranes holds a special place in my heart
What a great model! thank you so much! I ended up making my own PCB from a perf board to get up and running quicker. ended up using some 18650 I had already and a BMS for max run time haha. My 3 Years old is loving it so far. One change I made to the code was to initialize the Trim with -6 (3 clicks left) and I also have the trim buttons being disabled 30 seconds after boot. My son kept hitting the bummers on the xbox controller on accident which would eventually jam the servo and burn it out, went through 2 servos but since the change the replacement servo has been running strong. The PCB for the excavator comes today which is all I need to get it going, currently printing the trailer. Thanks again!
I’m so happy to hear you’re enjoying the models! Also sounds like you’ve made some improvements for your situation which is awesome! I hope the excavator build goes smoothly and that you(and your 3 year old) enjoy it as well.
Automating it to collect poop and then take to a “dump site” would be hilarious and awesome
A thought for optimizing the printing topology, making the 'lip' of the dump bed a separate piece, would cut out the need for almost all support structures there, as well as remove the need for the weird tilt on an A1 or similar bed sizes.
Awesome build! Your alterations on every move you make are really thoughtful and creative.
Probably very complicated but this is my favorite lg1750 liebherr, because it builds the windmills.
That's a huge improvement in performance, nice!
One thing I'd like to see is some space dedicated to installing a camera module, since those ESP32s can be used to build FPV models (I've done something like that with a 1/50th scale toy RC car and it's been more fun to FPV it around the house than I'd originally thought). I can imagine your models being a lot more fun in FPV than a simple racer.
Although I hope to reach my 61th birthday soon, my little boy's heart beats a bit faster when I see these fine models!!
Awh it makes me so happy to hear that! I wish you a happy birthday in advance
@@professorboots
i been waiting for a bigger one :OOOOO!!!! thank you. you like boss man of the cool toys we can build
Happy to oblige!
Make a rough terrain crane.
Like a tracked crane?
@@professorboots 8 wheels!!!!!!!
@@PerseidArchimedesfront and rear steer, and also outriggers
@@bmxscape YES
@@professorboots rough terrain is an off road type usually with a single person cab
Love the new build, I recently built the RC excavator and it works great. The only thing I did not like in the entire build were the screws, these 2.6 screws were a pain to source in my country and they fell out multiple times, maybe the one I received were not the correct size and they were inconsistent, it would be great if your builds use standard M3 or M2 screws with M3/M2 heat inserts, they work really well with 3D printed parts and are easily available even locally.
Thank you for the feedback! I think I could definitely find a new screw solution to help prevent that problem. Look for it in the crane!
@@professorboots I just made a miniskidi. And I used M3 screws and heatset inserts practically everywhere (thanks for the step files). It's an easy mod and absolutely worth the extra time.
liebherr ltm 1200!!!
I saw one of these in person as a kid they are just as cool as you would think. And I was the same Hight as one of the wheels.
If burning up the track motors becomes a problem, you might consider adding a sensor of some sort, be it an encoder on the motor itself or a current sensor on the motor output, to detect stalls and cut or reduce motor power. Alternatively you might stick thermistors on the motors and detect an overheat instead.
Nice to to see the dump truck scaled up!
Would be cool to see a crawler crane
Or something that I really would like to see a telehandler based of Cat TL642D with stabilizers
Yes like a Manitou - for next project
a telescoping crawler crane would be sick, you could even use existing parts from the excavator project to make it simpler
I agree that would be awesome
Can’t wait to see your next projects, great job these are so cool
Thank you!
Professorboots has posted *day has just become better* well done mate cool video as always ! - keep up the great work !
Thanks for doing these projects and videos! I bought the mini skidi kit and it is fantastic!
Gday, absolutely awesome build, I reckon a Franna crane would be fantastic mate, cheers
This is fantastic. Videos that inspire me to do things, learn things, are always the best. Thank you for sharing.
Of course, I’m glad you enjoyed the video!
These are amazing! Finishing up my current project but damn, these are so hard to resist!
Ok. I know you want to do a crane but i double dog dare you to attempt the most amazing piece of equipment ever. THE FORWARDER!!!!!
Awesome result, well done! Make the crane have a telescopic boom please!
Definitely one of the 4 wheel - 4 wheel drive & 4 wheel steer cranes with a telescoping boom. A Rough Terrain Crane - google it I'm telling you they're pretty sweet. Especially for outdoors fun, like u realized is so much fun with the upgraded MiniDump & that sweet Excavator u designed.
Could even do a deviation in the build process to allow for it to be made into a telescoping forklift iteration instead of a crane. Heck I'd make one of each, that's what I'd do. Potentially increasing ur circuit board & other parts sales for you to boot, Professor Boots.
When loading a dump truck with a excavator you actually make a bench on top of the pile of material and load the truck by digging up the bench. Much faster!
What program do you use for designing everything? Is it free? Please tell me. I wanted to make my own construction vehicle a, tractor scraper but with a large dump truck bed, and where do you buy all your motors and which ones for different torque and speed,thanks!😊😅
PLease make a off-road Hummer and place obstacles for it to climb! I love you channel, man! keep up the good work!
Ironically your idea of the motor being in the hub is how some of them are actually set up
Belt Link 120/TT or a cable crane like Link Belt LS-98
I do want to print the truck and the excavator. Looks like so much fun. I used to haul heavy equipment for a living
I asked the wife which crane she wants. Ready? "All of them"
I wasn’t ready but I’ll try my best haha
I'd say a 4x4 rough terrain crane. 4 wheel steering and telescoping boom. Would be a great addition to the fleet. Then hopefully next a dozer.
Love how creative you are, I'm not sure what designs are available, but the one from terminator 3 would be good, and could maybe support wrecking ball attachment.. 😊
God damn if this was a thing back in my day when I was a kid I would've been in heaven
While not technically a crane you should build a sky crane helicopter. It would be really cool to see how you do that
Hey, I love it, and I thing I will made it, but how color of filament did you use? I thing it's bambu labs filament, but I don't know which exact color it is
Could you make a Liebherr LR13000 crane, with counterweights at the back and a working articulating arm? Maybe it could use string to operate the arm so that all of the motors could be mounted lower for a low center of gravity?
That would be super cool, this is in the top runnings right now
1:35 they make a 3.7v servo which is in a couple of my rc planes and the servo is fast is very strong and reliable
Love your videos. I think it would be intersting to design a working rc cement truck with the cement shoot
That would be really cool
An 8 wheel drive mobile crane. With outriggers if possible. I’ll become a workshop member if you do.
Plan on building a few for Christmas presents
That’s the spirit!
If you build an excavator you can then use that to unwrap the others🤯
@@professorboots this is the move!
This really makes me want to have a miniature construction site run by completely automated micro machines
What if you increase the price of all of them but prebuilt and in a prebuilt section of your store so essentially it’s a second product but same thing and prebuilt
"öaf 19.403 hk ad" ein Lkw mit Kipp Funktion und Heckkran. Der Kran hat diverse Aufsätze wie hacken, erdgreifer und weitere. War ein riesen spaß den zu fahren und wäre cool diesen spaß auch weiterhin halt im kleinen haben zu können.
Der Kran selbst war ein pk11000
hey mate just making a suggestion to increase how well it drives maybe if you make it into a swivel chassis or have one of the axles on a hinge like a tractor it would be able to articulate over small bumps
Can you make a bulldozer and a wheelloader? That would be an awesome addition to your fleet. Truly amazing projects and videos!!
AMAZING VIDEO!! I am so inspired, but there are two questions that i still have, what is the difficulty in making them(skidsteer, dumptruck and excavator) and what is the total or individual price for the electronics?😁
They range in terms of difficulty, with the skid steer and dump truck being pretty easy. The excavator is a little harder because there’s sooo many moving parts. Cost also varies depending on where you get your parts for example if you order everything on Amazon it could be up to 100$ versus ordering some stuff through aliexpress which could bring it down to 40-50$
@@professorboots okey tysm, I just might make them..
This is so cool! I want to build my niece a sandbox all of a sudden!
I really love the Lego 42009 mobile crane and would love if you made a crane somewhat similar to that type of crane.😊
Lattice boom crawler crane with several boom length options.
Manitowoc crane
The interesting part about scaling the dump truck is that IRL most of those trucks have electric motors in each wheel. I'm surprised you didn't just do that for the rear wheels after putting motors in the front wheels.
How about a telescopic all terrain crane with 3 or 4 axles and working outriggers.
That would be so awesome
at 9:14 is absolutely a whole robot
crane that has outriggers, those are a necessity especially because 3d print is light and can tip easily
Outriggers really would be cool
Hey your such an inspiration! I have been getting into robotics, electronics and 3d printing, do you have any tips to how I can learn the type of stuff you do? Thanks!
Id love to see a Liebherr LR 11000 Lattice Boom Crawler Crane!
would you consider providing full build kits? would instantly buy it (i'm not a 3d printer guy)
So where is the commercial license to sell these !! Awesome work folks would love these at my markets lol
I would love to see concrete mixer next!
Hello. I have a problem with the firmware. This is a mini dump project. When power is applied, everything works, but as soon as I try to turn the wheels, the servo scrolls and does not respond to control. Can you catch up?
oh man, next we need a semi truck!
I just went through and watched your excavator video as well as this one, epic stuff! I'm excited to print and build both of these models. One question though, how much does it cost to buy all the different motors and wiriing (excluding the ps3 controller as I already have that)? I'm planning on paying for the workshop membership to put it together but want to wait until I have the models printed.
Will we be able to use the skiddi V3 PCB?
5:01
18.06.22 events showed that using a controller in vehicles is a bad idea
Is there any Chance to power it up with 12V, would be amazing, even for the Excavator??
Where do you learn all your skills? I’d love to be able to have your skill set
Trial and error, but mainly error. It’s all about finding a project you’ll have fun making, the skills always follow.
I'm loving these lil construction builds, but I do have a question. Have you thought of, building these to use standard RC electronics?
The Liebherr LTM 1100 would be pretty cool
Which software do you use to design the parts for your projects?
Hey, Mino’s kid can with only the bucket working, no aux. vise versa. Help!
Finally the dumptruck i want, make the mini skiddi now i need the truck, now to save up on some funds.
Awesome work, man!
Awesome!! Love it!
Liebherr 11350. Does the job for SpaceX, should be fine for moving a mini skidi between countertops.
When will there be a kit for the excavator and new dump truck?
will you also update the excavator code to work with bluepad?
What software do you use to make the models?
Do you have a link for all the parts like an affiliate link or something 🤔
Truck based crane or a wrecker rotator
how do you protect polarity with two batteries?
Can you design one that uses standard rc components
Now it's time to build a Pailoader
We need a tractor with working pto and hitch
build a crawler crane conversion for the excavator please
2 cranes: 1st - static crane, 2nd - crane truck
Hey Prof Boots, please can you make the code compatible with other esp32 like the (ESP32 Cam Module) please. I know it has less pins but you could make a pulling truck (like the Oversized Load pulling Truck) please 🥺
my favorite crane is probably grus americana
Palfinger PK32080 would look cool!
The Only badass crane that comes to mind is from Terminator 3 Rise of the Machines!
Franna Crane!
a truck mounted crane
Like the Franna Crane? 🤞
I'm still rooting for the Komatsu d355, let's make it a reality!
I dont have ps controller, can esp32 connect to other controller? (I have gamesir t4 pro)