Excellent Video! Godox engineers did a great job thinking through how this one bracket could be as versatile as it is! It perfectly fills my flash bracket needs.
Hi everyone! A fairly long video here for a small, but what we feel is an essential item for photographers - the brand new Godox S2 Bracket. We go through everything from comparing it to the previous S-Type bracket, different ways to mount the range of Godox flashes, as well as compatible lighting modifier options. Timestamps can be found below: 1:00 - Unboxing 1:24 - Closer Look at S2 Bracket 1:53 - New S2 Bracket Comparison Vs Old S-Type Bracket 3:12 - S2 Bracket's New Mounting Point (Vertical, Horizontal) 4:20 - S2 Bracket & Godox V1 Field Test in the Studio 4:53 - How to modify the S2 Bracket Mounting option 6:02 - Different S2 Bracket Mounting Options (TT350, TT685, Godox V1, AD200 / AD200Pro, AD400Pro) 12:54 - Lighting Modifier Options available for the S2 Bracket 13:52 - How to mount the Godox 60x60 Tulip Square Softbox onto the S2 Bracket without a speed ring Feel free to comment any other questions you may have and we'll be glad to help. Enjoy!
The silver tab for the umbrella holder has broken off on day one. Bumping the umbrella in different directions a couple times was enough. I am really disappointed in how thin the tab is and how easy it was to break. I will have to RMA it.
*Sep/Oct 2021:* is this 'S2' unit still current, or has it been superseded? I need two of these for off-camera flash portraits outdoors with *_portable_* lightstands that rise to around 7 feet. Any clues?
nice video. I am very disapointed with S2. I wanted to follow godox tutos purchasing a UB130W umbrella and discovered two problems : - when we want umbrella horizontal above subject so ad300pro vertical, the umbrella is so heavy that it drops against tube. I needed to attach clamps,... rft-17 with a screw is helpful but the hole is badly aligned on S2 border. So S2 showuld have a optional screw for umbrella - when we use a magmod 42" or umbrella 130, due to weight, the rotule is not a sgood as ad400pro one and the head of ad300pro rotates to the ground floor under the heavy weight
Hey, my S2 holds my AD200 pro perfectly, but I cannot get it to tilt at all. Won't budge. Has anyone dealt with this? I feel like I'm going crazy, it can't be that difficult. I just want to tilt my softbox :(.
Yeah, they improved a few things (needed), but some some reason, eliminated the screw lock for the umbrella shaft. Now, as an added benefit, your umbrella, softbox, etc. can take off by itself in high winds.....it's a "safety feature". Apparently. Version 3 WILL have a locking mechanism!
@@leekokhong3829 And the spring tab on my unit has broken off completely on my first portrait session after a few bumps to the umbrella and the umbrella is now loose inside. I will have to RMA it!
Well done. Just started down this path with Godox. You review is the FIRST ONE I can find that actually covers the use of to top round hole on the stand (i.e. for mounting the bracket vertically). No other video (will leave the names out) show that at all (and of course I was wondering with the screw hole drilled in the side), nor could I find it in the sheet contained with the flash (no photos of that hole being used that I could find) nor any information on Godox's website. So thank you for that. The only thing I did not see you cover (with respect to the AD 200 and AD 200 Pro, was the different way of mounting the bare bulb (i.e. with tightening screw) from the front instead of from the rear as you are demonstrating with all the others. I'll look at what your channel has covered already, but if the following isn't there, could you consider it: Testing side by side all similar modifiers that Godox makes (i.e.Reflectors - for best light output and efficiency, beauty dishes, softboxes, etc.). Would appreciate hearing any reservations (not just benefits) as well.
Like Godox products my BIG issues is the handle!! Just make it 1 inch shorter please. It gets in the way when I want to tilt my soft box so I have to take box off before I can adjust bracket. Anyone out there got the answer to this???
Thanks! It's quite sturdy and is made with the same materials as the bracket that comes with AD400Pro and AD600Pro models. We'd be comfortable with using most modifiers available on the market, if it's something too big it'd be noticeable if the bracket couldn't hold it.
Hi, I intend to Mount my Godox V1 to this Bowen’s mount. Does it come with a hand grip so that I can hand hold it? Can I use a regular tripod in lieu of a light stand to attach it to?
A hand grip is not included but you can hold it via the stand bracket or perhaps look at getting a small boom arm to attach to the bottom. We retail one with a foam grip which give it more length and is more comfortable to hold - www.hypop.com.au/products/spectrum-professional-lighting-and-audio-boom-arm-set-with-foam-handgrip
I had a problem with Godox S2 - the handle jammed. I've done everything according to the instructions, I know I have to push it first, but it just won't move. Who had this problem, who solved it?
@@hypop That might be a solution. My experience is that with an adapter ring the whole becomes thicker and the light from the flash no longer enters the softbox properly. The best solution is to take a separate elinchrom speed ring for bowens. It then sits directly on the softbox without the thickening. But thanks for your suggestion. At least it helps other Elinchrom users with a solution for this situation.
Great video. Straightforward and clear. What's the maximum diameter size of the opening? I have a Neewer Vision4 and trying to figure out if it would fit.
The pin may be bent. You can use a hex tool to open the bracket and see if you can bend the pin back into place. Otherwise return to the retailer and they can hopefully assist.
Thanks a lot for this video. And what light stand from godox is good to bend or adjust the softbox into a required angle? Or what boom stand is available from godox?
Hello... do you think you could mount two Wistro 360s in the S2? Thank you for your time and attention. Also, do you know the biggest size pop-out/collapsible soft box available is?
Yes, it most certainly is! It's a standard Bowens S-type mount so most other brand lighting modifiers that feature the Bowens mount should be compatible.
Very nice video, well done. Did you feel the S2 is strong enough to hold the AD400? Also, do you know if it's possible to install the AD600 in the S2 as well?
Yes, with the AD400Pro it felt sturdy enough as there was enough surface area for the S2 to clamp down to the head. Unfortunately the AD600 / AD600Pro doesn't feature the same metal mounting point so they're not supported.
Hello, Is there any changes in design of S2 that allow to attach it to C-Stand (directly or with baby pin). Problem with old S-Type is it cannot be attached to (for example) Adorama Flashpoint C-Stand. Normal depth of socket to attach anything on C-Stand is around 1.5". With that depth it sitting properly on pin and cannot be accidentally removed without loosing screw. Socket of original S-Type not deep enough. In wide portion that is 5/8" it is only 1" deep, so old S-Type cannot be securely attached to 5/8" pin. Thank you
I picked up this new S bracket and it is a real nice change of moaning my godox ad200. No more trying to squeeze it in to the original S brackets that were a tight fit. Now you could stand it straight up if you wanted to in the mount. Plus it is so much well made with better materials and keeping it tight is not a problem. I will be picking up a couple more these to use two speed lights and my A.D.200.
@@hypop Hi! Thank you for your reply. I know, but I wanted a collapsible easy to carry soft box, because I do in home, location shoots all the time, and there is one 31x3!" that works with the S2 type. I'm buying one that I could use with Bowens, so that should work. Hopefully! Have a great evening!
Your instructional videos and product reviews are so helpful. Thanks and keep them coming!
Can i use ad300 pro with this s2 bracket ? Plzz reply sir
For AD200 round head you have blocked vent holes on it... Good way to burn it?
Excellent Video! Godox engineers did a great job thinking through how this one bracket could be as versatile as it is! It perfectly fills my flash bracket needs.
Finally a video showing different sizes and styles!!
tx
Hi everyone!
A fairly long video here for a small, but what we feel is an essential item for photographers - the brand new Godox S2 Bracket. We go through everything from comparing it to the previous S-Type bracket, different ways to mount the range of Godox flashes, as well as compatible lighting modifier options. Timestamps can be found below:
1:00 - Unboxing
1:24 - Closer Look at S2 Bracket
1:53 - New S2 Bracket Comparison Vs Old S-Type Bracket
3:12 - S2 Bracket's New Mounting Point (Vertical, Horizontal)
4:20 - S2 Bracket & Godox V1 Field Test in the Studio
4:53 - How to modify the S2 Bracket Mounting option
6:02 - Different S2 Bracket Mounting Options (TT350, TT685, Godox V1, AD200 / AD200Pro, AD400Pro)
12:54 - Lighting Modifier Options available for the S2 Bracket
13:52 - How to mount the Godox 60x60 Tulip Square Softbox onto the S2 Bracket without a speed ring
Feel free to comment any other questions you may have and we'll be glad to help. Enjoy!
The silver tab for the umbrella holder has broken off on day one. Bumping the umbrella in different directions a couple times was enough. I am really disappointed in how thin the tab is and how easy it was to break. I will have to RMA it.
AD 200/etc maybe mount upside down first on the bracket so you don’t have the issue with the space ...
Thanks sir
Well done
Thanks so much. You addressed every question I had about it. Great presentation skills as well.
Glad it was helpful!
*Sep/Oct 2021:* is this 'S2' unit still current, or has it been superseded?
I need two of these for off-camera flash portraits outdoors with *_portable_* lightstands that rise to around 7 feet. Any clues?
nice video. I am very disapointed with S2. I wanted to follow godox tutos purchasing a UB130W umbrella and discovered two problems :
- when we want umbrella horizontal above subject so ad300pro vertical, the umbrella is so heavy that it drops against tube. I needed to attach clamps,... rft-17 with a screw is helpful but the hole is badly aligned on S2 border. So S2 showuld have a optional screw for umbrella
- when we use a magmod 42" or umbrella 130, due to weight, the rotule is not a sgood as ad400pro one and the head of ad300pro rotates to the ground floor under the heavy weight
Perhaps compare with another S2 unit as the tilt locking mechanism may be loose or faulty
Hey, my S2 holds my AD200 pro perfectly, but I cannot get it to tilt at all. Won't budge. Has anyone dealt with this? I feel like I'm going crazy, it can't be that difficult. I just want to tilt my softbox :(.
There may be an issue with the tilt knob
Can I mount elinchrom softbox?
Yeah, they improved a few things (needed), but some some reason, eliminated the screw lock for the umbrella shaft. Now, as an added benefit, your umbrella, softbox, etc. can take off by itself in high winds.....it's a "safety feature". Apparently. Version 3 WILL have a locking mechanism!
My one is so tight that the umbrella doesn't even go inside, essentially I can't use my umbrella on my bracket now
@@leekokhong3829 And the spring tab on my unit has broken off completely on my first portrait session after a few bumps to the umbrella and the umbrella is now loose inside. I will have to RMA it!
Well done. Just started down this path with Godox. You review is the FIRST ONE I can find that actually covers the use of to top round hole on the stand (i.e. for mounting the bracket vertically). No other video (will leave the names out) show that at all (and of course I was wondering with the screw hole drilled in the side), nor could I find it in the sheet contained with the flash (no photos of that hole being used that I could find) nor any information on Godox's website. So thank you for that. The only thing I did not see you cover (with respect to the AD 200 and AD 200 Pro, was the different way of mounting the bare bulb (i.e. with tightening screw) from the front instead of from the rear as you are demonstrating with all the others. I'll look at what your channel has covered already, but if the following isn't there, could you consider it: Testing side by side all similar modifiers that Godox makes (i.e.Reflectors - for best light output and efficiency, beauty dishes, softboxes, etc.). Would appreciate hearing any reservations (not just benefits) as well.
Like Godox products my BIG issues is the handle!! Just make it 1 inch shorter please. It gets in the way when I want to tilt my soft box so I have to take box off before I can adjust bracket. Anyone out there got the answer to this???
fantastic video, thanks for taking the time to make it
Can you attach any softbox that has a Bowens mount on it to this?
Thanks hypop awesome video. Just got a silly question to ask...How do you keep the umbrella from sliding out?
The umbrella is held in via a friction clip. It's held up with most umbrellas we've tried except perhaps using larger parabolic umbrellas 120cm+
Which light stand is compatible with this S2 Bowen mount?
Hey Ravi. The S2 Bracket mounts onto any light stand that has a 5/8" Spigot.
Great video! Would you advice a weight limit for modifiers to use not to go futher in terms of strength of the bracket?
Thanks! It's quite sturdy and is made with the same materials as the bracket that comes with AD400Pro and AD600Pro models. We'd be comfortable with using most modifiers available on the market, if it's something too big it'd be noticeable if the bracket couldn't hold it.
How can I mount the bracket into a normal/standard tripod (I don't have a light stand)
You'll need a female 5/8" spigot that has a 1/4" thread to mount to the quick release of your tripod.
يوتيبوب شبكة كعب
righty tighty, lefty loosey. hahah
Hi, can we mount Godox SB-GUE120 cm Softbox in this bracket?
Hello folks! So, Im getting the AD300pro, will this one work? I've been told but need to double check before buying. MUCHAS GRACIAS
Hi Fermin, yes we can confirm that the S2 bracket works with the AD300 Pro 👍.
@@hypop Many thanks!!!!
Hey I want to use s bracket vertically, can you suggest any accessories which can help me out ?
Bro youre awesome
does anyone know if one can mount a Godox AD360 flash as well?
The AD360 would work also
Hi, What small softbox was used with v1 in intro?
12:51 Brooooooo Looks like you like to live dangerously
Living life on the edge 😆
Hi, I intend to Mount my Godox V1 to this Bowen’s mount. Does it come with a hand grip so that I can hand hold it? Can I use a regular tripod in lieu of a light stand to attach it to?
A hand grip is not included but you can hold it via the stand bracket or perhaps look at getting a small boom arm to attach to the bottom. We retail one with a foam grip which give it more length and is more comfortable to hold - www.hypop.com.au/products/spectrum-professional-lighting-and-audio-boom-arm-set-with-foam-handgrip
@@hypop thank you
Love your channel!!
I had a problem with Godox S2 - the handle jammed. I've done everything according to the instructions, I know I have to push it first, but it just won't move. Who had this problem, who solved it?
I have same problem it’s so frustrating wish someone would answer this question 😩
New to off camera lighting and just bought the godox S2 bracket. This was so helpful! The instructions weren't nearly as in depth as this vidoe.
First Soft and S2 set up... your video saved my butter. I needed a magnifier and a bit of luck to use the instructions in the package. Thanks!
...great job ...thanks from Czech Republik ))
Thank you!
In the old versio there were different speed rings for different vendors. Is there a solution to use Elinchrom softboxes on this bracket?
No Elinchrom version unfortunately. It's another component but erhaps using an Elinchrom to Bowens adapter is a workaround.
@@hypop That might be a solution. My experience is that with an adapter ring the whole becomes thicker and the light from the flash no longer enters the softbox properly. The best solution is to take a separate elinchrom speed ring for bowens. It then sits directly on the softbox without the thickening. But thanks for your suggestion. At least it helps other Elinchrom users with a solution for this situation.
Does the bracket work with the AD300 pro?
Yep! We can confirm that the Godox S2 bracket works with the AD300 Pro.
Hi what is the little tripod you got 9n this video where to get them
Best bracket
Great video. Straightforward and clear. What's the maximum diameter size of the opening? I have a Neewer Vision4 and trying to figure out if it would fit.
This is exactly what I was looking for. Will be purchasing soon.
Awesome! It is quite a useful accessory to have in your photography toolkit so we highly recommend it 😊
I just got a S2 and am having difficulty mounting the umbrella I think I might have gotten a faulty one, the umbrella just doesn't go in
The pin may be bent. You can use a hex tool to open the bracket and see if you can bend the pin back into place. Otherwise return to the retailer and they can hopefully assist.
Thank you so much...very useful review... now i can mount my ad 100 pro with this bracket...
Great 👍
Do I need certain kind of baby pin for this bracket?
Thanks a lot for this video. And what light stand from godox is good to bend or adjust the softbox into a required angle? Or what boom stand is available from godox?
Great video, thanks for sharing!
Thank goodness for this video!!
Great video bro (Y)
13:25 what type softbox?
does the S2 bracket have elinchrome mount ?
Can you mount 2 tt685’s?
Well done sir great review you have helped me with the tips you provided.
Thank you for your in depth and functional review!!!
Glad it was helpful!
Hello... do you think you could mount two Wistro 360s in the S2? Thank you for your time and attention. Also, do you know the biggest size pop-out/collapsible soft box available is?
Hey there!
The S2 bracket wouldn't be large enough to mount two AD360's, and the largest collapsible softbox Godox offers is 120cm.
will it fit if you put two tt600?
hi, does the V860 2 C fit?
Hey man, thank you. Do you know if you can fit the tt350 + S R1 adapter?
The S-R1 is universal as it has a screw clamp so will work with the TT350 range. It will just look a little oversized for it :)
the fact that this nor any of you soft boxes come with the bowens adapter is trash.
The S2 bracket has an in-built Bowens mount?
What light stand is that?
It's the Spectrum 43cm Desk Stand
Many of my questions about the S2 answered in the video.
Is it compatible with other bowens mount light modifiers except godox?
Yes, it most certainly is! It's a standard Bowens S-type mount so most other brand lighting modifiers that feature the Bowens mount should be compatible.
Very nice video, well done. Did you feel the S2 is strong enough to hold the AD400? Also, do you know if it's possible to install the AD600 in the S2 as well?
Yes, with the AD400Pro it felt sturdy enough as there was enough surface area for the S2 to clamp down to the head. Unfortunately the AD600 / AD600Pro doesn't feature the same metal mounting point so they're not supported.
Good clean no-nonsense video. Well done!
Thank you very much!
Very informative!
I cannot get my umbrella shaft thru the slot. Just won't go. Is there a trick?
Perhaps the tension clip is broken or the umbrella shaft is too thick?
Standard umbrella shaft but the tension in the umbrella slot totally blocks it.
Excellent video, well explained 🙂🙂
Thank you! 😃
Sir plz tell me two godox v860 fit in together in se brect
Yes, 2x Godox V860II will fit in the Godox S2 bracket when you remove all the bottom plates. Similar to how you can fit 2x AD200/AD200Pro's
Can it fit 2 tt685?
Hello,
Is there any changes in design of S2 that allow to attach it to C-Stand (directly or with baby pin). Problem with old S-Type is it cannot be attached to (for example) Adorama Flashpoint C-Stand. Normal depth of socket to attach anything on C-Stand is around 1.5". With that depth it sitting properly on pin and cannot be accidentally removed without loosing screw. Socket of original S-Type not deep enough. In wide portion that is 5/8" it is only 1" deep, so old S-Type cannot be securely attached to 5/8" pin.
Thank you
Did you find a solution? Workable baby pin?
Yes. Socket on S2 is deep and there is no problems to install it on baby pin or C-Stand
@@eugeneshcherba1613 Any particular one. It looks like there are variations. Thanks.
I use Kupo KUPO-KG002212 pins and like them very much
I picked up this new S bracket and it is a real nice change of moaning my godox ad200. No more trying to squeeze it in to the original S brackets that were a tight fit. Now you could stand it straight up if you wanted to in the mount. Plus it is so much well made with better materials and keeping it tight is not a problem. I will be picking up a couple more these to use two speed lights and my A.D.200.
So the godox round head flash won't fit in the original S (S1) bracket , is it ?
@@Avat6 sorry I meant to to say the new S2 bracket.
Very helpful! Thanks
You're welcome!
Hey can you tell me the name of that Tabletop Light Stand you are using?
It's a small 43cm light stand. You should be able to find one on Amazon or eBay
Purchased and so far I love it. Compact and works with my V1 perfectly!
Great to hear!
Very good. Thanks for sharing
Thanks for watching!
I assume the ms300 fits in the c2 ?
The Godox MS300 has a native Bowens mount already so you won't need to use the S2 bracket to mount Bowens modifiers.
What kind of stands are those?
The desktop stands we use are the Spectrum 43cm light stands - bit.ly/43cm-mini-light-stand
Thank you Very much.
You are welcome! :D
Really nice!
Thank you! Cheers!
I need a bracket that holds 2 speedlites
Hi! Can it be used with the Godox SL100 ?
Hi there, it doesn't work with the SL100 but you shouldn't need to use it with the SL100 as that light already has an in-built Bowens mount.
@@hypop Hi! Thank you for your reply.
I know, but I wanted a collapsible easy to carry soft box, because I do in home, location shoots all the time, and there is one 31x3!" that works with the S2 type. I'm buying one that I could use with Bowens, so that should work. Hopefully! Have a great evening!