Know THIS before purchasing a generator - Champion 8750 Watt Open Frame Inverter
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- In this video i'm going to share with you my experience purchasing a generator and what i've learned over the course of one year of use.
Here is the link to the Champion 8750 DH Series Open Frame Inverter Generator
amzn.to/3p27LLn (Commissions Earned)
As an Amazon Associate, I earn from qualifying purchases.
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
This generator appears to be similar to the WEN 8750. You should add this to your video since there are NO OTHER VIDEOS explaining the features and maintenance of the generator.
Guess what?!? That video on the Wen DF875iX airs this Sunday the 18th! If you're subscribed, you won't miss it!!
The Chinese always Copy from other countries all their products.... it's a Fact
The Wen, Champion, and Predator 8750 are the same generator with a different paint job
Champion version has bonded neutral....WEN version has floating neutral. Either one can be swapped to be the other.
You state that "pure sine wave" refers to 60 hertz. Not so. 60 hertz is a measur ment of frequency, the number of times a wave form, both positive and negative sides of a full 360 degree cycle, is produced in a one second time span. Pure sine wave refers to the SHAPE of the wave form... versus square wave, saw tooth, modified step, etc. Not being nit picky, but if you give out info, please let it be correct info. Non pure sine wave generators also produce 60 hertz, here in USA.
I am trying to figure out the width of the frame without wheel attached or the width of the frame at the top of the generator, do you by chance have that dimension?
I would also love to know the name and model of your tent
Its by GenTent
Which generator do you prefer? This one or the Wen 8750 model?
No preference so far. Go with the WEN if you can make use of propane. I plan to do another follow up video on these two generators once I find out more.
Hopefully it will last Inverters have capacitors. Capacitors have life cycles. Most likely it’s CD 2-10 years besides that great generator.
Well, every genset has a life span. Modern Open Frames have an Automatic Voltage Regulator, which contains capacitors, magneto ignition on engines have electronic components that age and wear, the engine, if something catastrophic happens to the alternator head (like burned up windings, carbon brush failures etc.) or the panel, fuel system etc.
did you have to change your unit over to floating neutral to attach to your house...my transfer switch says floating neutral...just wondering how you and others with this unit dealt with that issue....thanks alot for the info...waiting for mine to be delivered.
If you can get the inverter, do it, but I also think the ‘need’ here is overblown. Virtually all of the whole home (non-mobile) generators sold are not inverted, and you rarely if ever hear about these units being problematic.
Is every generator owner going to report issues or hop on TH-cam and make a video? No so how do you know ?
@@Dickj203 - Did you read and comprehend what I originally wrote?
@@critterdude311your assuming people are going to somehow let the world know if a non inverted generator blew up their fridges circuit board. How would one know if no one reports this? We don’t.
I was thinking that most furnaces and modern appliances probably utilize a switch mode power supply (which typically accepts anything from 100-250V 50/60 Hz so harmonics won't really hurt them as the aforementioned power supply unit is more or less an inverter itself as it takes the incoming 60Hz voltage, immediately converts it to DC then converts it back to high-frequency AC that's then sent through the small transformers then converted back to the required DC voltages of the devices. I know it sounds like a missed step but you would get the idea.
The Generac whole home generators have solid-state voltage regulation and are able to limit THD to under 5%. One of the reasons they cost big bucks. A non-inverter generator may exhibit 5% THD at idle, but the more you load it, the THD will increase. You can expect 15% THD at around half load.
Champion generators are excellent value for the money. Just as important, they have service and parts available unlike a lot of the Chinese clone, "no name' generators. I use both a Honda EU6500 along with an Generlink electronic switch for home backup, plus three other Champion 2000 watt gennies for a multitude of other uses.
Honda is a great generator but FAR too expensive versus any of the competition. For my money, Champion is the way to go
I have this Champion generator connected to a Generlink too with natural gas snorkel. Works very well.
I have been giving some though to converting my EU6500 to natural gas. One thing holding me back is the 5500 running watts would reduce to around 4000 to 4500. Secondly and most important, I don't know what size hose I need for natural gas. Everyone says 3/4 inch but whenever i see it anywhere, it's always a 1/2 inch hose feeding the gennie
What size hose did you use for your generator. Your's is bigger than mine so if it works for yours it should work for mine. I have about a 15 foot run from the house to the generator.
This generator is pretty noisy. More than my quiet Honda that I have used for decades. I will build a quiet box or set of baffles for it.
I've read hundreds of reviews for non inverter backup generators and no one commented they lost an electrical appliance due to a generator without an inverter. How can that be if this is such a problem???????
It's not a problem. It's a risk. I don't have an answer for your reading sources, but I will say there is a lot of information out on the web. Appliance failure isn't black and white. They may not fail during conventional generator use and failure could be random/sporadic at any time so one might not diagnose the cause effectively and make the correlation. The affected user might be more inclined to leave a negative review for said appliance not realizing the cause.
I understand that inverter generators are also much quieter and run more efficiently (less fuel).
@@dennisdinneny4260 Yeah I've heard that as well.
I believe that it is over voltage that damages electronics, not having a stepped sine wave or off frequency. Appliances with circuit boards will not run or run correctly without a true sine wave or off frequency however.
@@percyfaith11 That's a good point
It's kinda too late to know this for My sensitive electronics appliance...
I have not use the Rigid generator yet since I bought it. Only tested run
Over-hyped fear. If you are good on RPM and if your unit has AVR and it works well...you are likely OK. See my other comment elsewhere here.
I did a test run on my Champion Power Equipment 100520 8750-Watt DH Series Open Frame Inverter today.
Number 1 problem is RFI. If you have AM Radios, then forget this generator. The RFI is no where near as low as my 1990 Honda EX4500 which does not interfere with my AM radios. This Champion 100520 will not be replacing my EX4500. It will remain a good higher wattage back up.
Noticed you have some sort of tent cover set up on your generator. Would love to see a 3 minute video on that. Along with info on where to purchase. Thanks all great information. Important information.
You should turn off the camera mic LIMITER to that it does not compensate for the two audio levels. The limiter will try to make all sound coming to the mic equal.
Total Harmonic Distortion (THD) needs to be
Great video champ . Spoken clearly and to the point .. love it
Thank you
Thanks for making the video and tutorial video
I have now made up my mind to buy this unit
1st time buyer - I used smaller inverters at work for power tools - but didn’t have the power rating I need - this unit will get me thru a power outage in the event of that happens
Question for you
What octane (gasoline) is recommended by manufacturer or that you use
Thanks
Larry
AWESOME and informative video my dude
Thank you! I very much appreciate that.
cool , thank you sir ! , I just ordered one
Great choice! Enjoy :)
Pretty much the same as my predator generator but I have electric start other than that it’s the same
This has electric start also, I'll have to check the predator out and maybe do a comparison - Thanks!
Good on you for finding someone willing to teach you the skills needed to thrive once you've signed an exstision
I always use 30 weight on my generators, and 4Runner. I am in Northern CA and it really does not get too cold here. I just got this generator.
Some high efficiency gas furnaces (Trane for example) won't run on an inverter generator (or any generator) IF the ground and neutral are not dealt with properly in terms of bonding. Floating neutral generators do not have the ground and neutral connected at the source of disconnect (the generator) and this poses a problem for certain sensors in the furnaces....if I recall flame detection. The ground and neutral can be connected or disconnected on most generators AT the generator itself. Ground rods also come into play. Does the generator need one itself? Can it just tie into the house rod? If you direct connect the furnace to the gen and nothing else, that's one scenario. If you connect the house with a small transfer panel or back feed using an interlocked 30A circuit breaker (such as those sold by Square D for their QO panels) then that is another unique scenario. You have to study your system and understand the parameters the generator must work in. Test and confirm the plan you come up with and make sure things work right. Heat is the main thing. Most fridges and such don't have the complex sensor array that gas furnaces now have.
Floating neutral generator is connected to the house neutral and bond and rod. Trane unit will be fine, I have one.
Where did you get those brackets for the cover thank you
gentent
Talk about the RFI problem.
Great video man
Is that synthetic oil?
nope
What model is the generator?
8750-Watt DH Series
Odd. The Champion, Wen, and Predator 8750 inverters are the same except minor differences like the predator uses a LIfePO4 battery. The Wen and Predator want the oil at the top of the dipstick
Is this the same model Home Depot carried that’s 9000/7250 watts? That one seems to be an exclusive to Home Depot. Not much wattage difference.
That's a good question, i'll have to check it out in person some time
Yes it is. The 9000 watt was exclusive to Home Depot so they branded it a bit differently.