DIY A Floating Shelves You Haven't Seen Before! - Easy Woodworking Project
ฝัง
- เผยแพร่เมื่อ 26 พ.ย. 2022
- In this video, we'll show you how to bend a floating shelf from a wood board using just a few simple techniques.
If you're looking to upgrade your furniture without spending a lot of money, then this is the tutorial for you! By following this simple technique, you'll be able to bend a floating shelf from a wooden board in no time at all! This will give your room a much needed makeover, without spending a lot of money!
Carving spiral router bit: shorturl.at/yOPRV
Ratchet strap: shorturl.at/gzFLX
Machinist squares: shorturl.at/amRU4
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. - แนวปฏิบัติและการใช้ชีวิต
This is amazing! I'd love to make one.
That was amazing and seemed a lot more simple than I imagined!
Amazing and great idea! It is a pleasure to see how clean you are working. Looks like not even a single extra movement :) Nice shelf!
Love this idea!!
There's so many applications for this. Thank you for the video. You did amazingly!
True well done!
Beautiful. Well done. I'd love to do that, but larger.
Bro, that is AWESOME. Top design.
This shelf is gorgeous! What an awesome design 💛
That is a fantastic looking shelf!
Amazing ! Congratulations !
Absolutely beautiful, simple, stylish! and amazed how easy it was to do!
That's beautiful. Wow. Stunning. I appreciate your patience!! I need more 😉
Beautiful result, pleasantly filmed. Thanks for the satisfying watch.
Very unique and beautiful.
Amazing, dude! Beautiful work! 😃
Stay safe there with your family! 🖖😊
That's beautiful & amazing looking thing
Brilliant!
Amazing job!
Beautiful
Having a pre-pass with a smaller bit would reduce chances of breakage for this. Essentially letting it just finish the V cut rather than making it. So prolly a 2 mm bit with a 2 cm depth pass (guesstimating by eye).
You don't really need to dump all that water on it. Stea... borrow a clothes iron, max it out and set it on steam. Through a piece of thin fabric (pillow case, perfect for this) steam the visible face of the wood. The steam will make the bend super easy. You can even use this technique to bend thin wood without any slits. I think the thickest i've tried using a regular Bosch clothes iron was 4 mm, beautiful, no creak or fiber split, worked great.
The best part about using steam and therefore steam, you're not messing too much with the wood by adding water. Soaking the wood in excess water will activate its pores and that can have a bad effect later, depending on your luck. It's not uncommon to see a waterlogged piece of wood, like for example when they're boil bent, split or have the raised fibers that you have to sand again.
Excelente 👍🏻
thats awesome as! good work!
great job
It's very satisfying to see everything coming together so cleanly. No gaps in the bends neither 👍
Good job bro
Muito bom, parabéns . Qual a fresa que você usou?
I just had a vision of turning that into a sound bar for my TV. Thanks for the inspiration
This was my idea as well. A low shelf to set my soundbar on below my wall mounted TV.
Очень круто!
Great job dude!What kind of wood would be ok for this kind of things?
Good
Can you explain a bit how do you calculate number of those cuts for bending and is it spiral bit necessary for bending? Thanks!
Amazing idea.... Please where can i buy the bit... Any online store link
Hi, can you clarify the spacing please BTW great job!
Did you calculate the angle of the kerf cutting bit, factoring in the thickness of the wood and the inside and outside radius and determine the number of kerfs or did it just work out?
ю вери гуд мастер ,👍😁
Can you do this with oak wood? Looks awesome
Отлично!
Do you have a link for the bit?
So satisfying. What wood did you use to make the bend?
Wow very nice job
🔵🔵🔵👍👍👍✔️✔️✔️😀😀😀🔵🔵🔵
Someone questioned before but do you have a link for this bit?
Tamar at 3x3 Custom needs to see this.
I'd like to see if you could use this method to create a more continuous curve without the ridges bulging through the veneer. I love this idea though and your shelf looks excellent ~maybe if you left more meat in the root of those cuts you could sand the peaks on the other side with fear of sanding through. Be tougher to bend for sure but it looks like you had little trouble bending your 1mm or so
Yeah, I imagine you could use a hair dryer and it would bend at thicker than 1mm.
Great video tutorial, one question how do you work out the bend radius?
Take a depth measurement to see where the widest part of the bit with be, then measure the bit width there. You can then estimate how much it will close. Obviously the thicker the piece, the more cuts that will be required.
It looks amazing. Wonder how long it before it snaps though. 1mm is not a whole lot to keep it together. Don't know how much that wood works, or how that glue stands the test of time, but it just seems that way.
I think the veneer is merely assisting the glue up in this case. If I were to make a guess, the curved surface would be as strong as any other wood joint.
you should put an amazon afiliate link to that router bit (and router? may as well)
I'll be the latest to ask for a link to the bit, please!
What method was used to fashion to wall???
Where did you get the router bit from please?
Where could you find this bit? Any suggestions?
👍
Very beautiful but structurally pretty weak. Can you test how much load it can hold on the flat top ?
What’s the total length of the board?
Naaaah. Good content that im subbed to and no new recommendations from youtube?! Gona let your videos autoplay for a while hopefully we can bump your numbers up.
What is the total length of board?
😳💕
I think heat might have been better than water
I think that must be a 6 degree bit (12 degree for each pass) not 8 to get a 180 degree bend with 15 cuts. Yeah?
It's 16 cuts.
Друже, а под другой радиус другую фрезу?
I just got a cat and want to do this for cat shelves bc it looks very nice and unique. I hate most of the cat furniture on the market.
pakai kayu apa pak?
Skill saw will do the same ...
Imitation is the highest form of flattery
I seen it in your channel, you are the first to use this technique, you have my respect 👍
I thank the space between every two successive cuts is 1.6 cm , not 1.6 mm as you saying !!!
Correct it in the comments because this will ruin the work of anyone will try it !!!!
You literally copied this video from one of my buddies JarMade.
Your a fake!
Get your own content!
What is that thing called you used for cutting?
Great job! But I’ve better added some fixtures besides the glue in the seam, so it’s more solid.
👍
👍