Hello Luisa, we are using our Laser-Dark (No-Cut) which is a transfer media that can be used with white toner or CMYK laser printers. It's a self-weeding 2-paper system for light to dark coloured textiles. If you'd like more information visit our website or write us an e-mail info@forever-ots.com www.forever-ots.com/product/laser-dark-no-cut-lowtemp-cmyw/
This happened to me as well. Both with Forever Laser Dark and with Flex soft that I had applied to mylar balloons. Started to peel with inflation of the balloons, and then humidity once I loaded them in the car finished off the transfers and all were 100% peeled off in the fifteen minutes it took me to reach my destination. Sad, because they looked great after pressing. Will need to work on this some more.
You can use Laser-Dark (No-Cut) with a CMYK laser printer under following conditions. You need a color density of: C: 100% M: 100% Y: 100% K: 100% to achieve optimal results. We therefore only recommend this for vector graphics which color saturation can be adjusted or for finishing with hot stamping foils. Another solution would be to use our Flex-Soft (No-Cut) on Mylar Balloons.
First time I have ever used Forever paper. Followed your clear instructions and got a perfect result. Thank you
Now that's how it should be done. Good to here.
Great...Now I have to tell my husband that I now need a Laser printer😂
Perfect 😂
❤❤
❤
Nice Job!!!!
Thanks!
Nice job! What tipe of paper is It? Is it vynil or htv?
Thank you for this tutorial .
Hello Luisa, we are using our Laser-Dark (No-Cut) which is a transfer media that can be used with white toner or CMYK laser printers. It's a self-weeding 2-paper system for light to dark coloured textiles. If you'd like more information visit our website or write us an e-mail info@forever-ots.com
www.forever-ots.com/product/laser-dark-no-cut-lowtemp-cmyw/
Hello when i tranported my mylar balloon filled with helium in the car..the humidity caused it to peel...any ideas on transporting?
This happened to me as well. Both with Forever Laser Dark and with Flex soft that I had applied to mylar balloons. Started to peel with inflation of the balloons, and then humidity once I loaded them in the car finished off the transfers and all were 100% peeled off in the fifteen minutes it took me to reach my destination. Sad, because they looked great after pressing. Will need to work on this some more.
@@heartlanddesigns210 weird not sure why bcuz it dont happen consistently
Is it hot peel onto the balloons?
Cold peel. Always cold peel, doesn’t matter what you press it on to.
I always seal the balloon, im not sure why my balloon keeps popping when i add air
You may be using too much heat or adding too much air into the balloon. Did you manage to work it out?
Can you use Forever laser dark no cut lite for this also?
Yes, that would be an ideal transfer media as you don't wash the balloon.
So you can use this paper with a cmyk laser
You can use Laser-Dark (No-Cut) with a CMYK laser printer under following conditions. You need a color density of:
C: 100%
M: 100%
Y: 100%
K: 100%
to achieve optimal results. We therefore only recommend this for vector graphics which color saturation can be adjusted or for finishing with hot stamping foils. Another solution would be to use our Flex-Soft (No-Cut) on Mylar Balloons.
What paper do I use or is that the same thing as the transfer paper
FOREVER Laser-Dark (No-Cut): www.forever-ots.com/product/laser-dark-no-cut-cmyw/
Can i use sublimayion printer with it@@forevertransfers
What type of B paper/ size of B paper?
here you can find the format sizes for the b-paper pro:
www.forever-ots.com/product/laser-dark-no-cut-cmyw/
Would this process work on Mylar bags?
That depends on the material. Usually, our Laser-Dark (No-Cut) already works with around 212°F which is a very low temperature.
What printer did you use?!
We used the OKI Pro8432 White Toner Laser Printer
What temp you use?
1:29 Marry A+B with Laser-Dark (No-Cut) 155°C/310°C
2:32 Press on mylar balloon 110°C/210°F
Nice
Thank you. Have you tried making them?