How to Install Coil Spring Spacers 1999-2004 Jeep Grand Cherokee
ฝัง
- เผยแพร่เมื่อ 1 ม.ค. 2024
- Buy Now!
New Lift Kit from 1AAuto.com 1aau.to/ia/1ASLK00021
This video shows you how to install new coil spring spacers from TRQ on your 1999-2004 Jeep Grand Cherokee.
This process should be similar on the following vehicles:
1999 Jeep Grand Cherokee
2000 Jeep Grand Cherokee
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee
Tools you will need:
• 12mm Wrench 1aau.to/o6b/1AXAA00010
• 15mm Wrench 1aau.to/o6b/1AXAA00010
• 18mm Wrench
• 12mm Socket 1aau.to/obPt/1AXAA00015
• 15mm Socket 1aau.to/obPt/1AXAA00015
• 18mm Socket 1aau.to/oauw/1AXAA00043
• Torque Wrench 1aau.to/oaWm/1AXAA00044
• Gloves 1aau.to/oaDI/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack 1aau.to/oaku/1AXAA00068
• Jack Stands 1aau.to/o8z/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for this video! I've done it 10 times already. Yellow markings are totally unnecessary! You just need to line up the springs with the lower isolator's groove. Big companies like you should know this!
If I take the rear pucks out and put them on the front with the front pucks will it work ??
I have always seen them on the top but I just put these on and I worry cause there is no lip to keep the spring in place on the rear is that really normal?
Wouldnt this effect the shock in some way?
Why use the same insulator and not a new one in this process ??
Every other WJ rear spacer I've seen goes on the bottom mount. Just saying.