Thanks a lot for this video. It was very helpful. I currently have a 24 crosstrack sports, the army or forest green color. The main thing I’m looking to do with mine, is an increase of the”forward approach angle” The installation you just conducted: will you show ((a side profile ))outside?, did it actually increase the vertical approach angle, as far as elevation? as you know, the departure angle in the rear is pretty decent from the factory. It’s not so much the winch I’m looking for. basically I would like the nose to be more of a canted Or beveled-upward.(I think they call it Baja design.” Dune-buggY looking.” if Subaru made, where that could be retrofitted very easily to look as such= not just the aesthetics, but actually integrated and functionality and ruggedness of the Crosstrack.(they would probably put the jeep Wrangler out of business.) I live in metropolitan areas where theres a lot of snow 2-3 months out of a year. and in order to keep progress in the cities, the streets must be constantly plowed. (Consequently),((man-made piles of from snowplows.)) because it stays below freezing in the snow doesn’t melt that quick in North eastern Massachusetts, and I go to Chicago a lot in the winter to visit folks. And that’s where this Baja design will come in handy. When major stretches of the metropolitan Street area has 3 to 4 feet of snow that’s been pushed there for blocks at a time by snowplows. Sorry for the long message. Thank you for your work be blessed.🕊️👍🏼
it DEFINITELY helped both the height and the approach angle. After I did this I wasnt scrapping like before unless I really pushed it. The approach angle is, quite frankly, absolutely horrible for an "offroad adventure" marketed vehicle. I rupped off an underglow and 2 rock lights prior to this, but not once I was done.
IVE BEEN Looking for this video... been planning to buy and install this ... GReat Video by the way. and how can i get the white color of the bumber? the website only shows black. and also where did you get your skid plate ?
your ride looks sick! I have the same car and I have been modding it as well. By any chance, are you running a switch panel for your lights? If so, can you do an installation video on it? Thank you, a new sub here.
I would, actually. I have a winch mounted as well. I also had concerns about the weight, but its not that bad. I thought maybe an impact to my MPG, but none and no sag. I was actually REALLY surprised.
Thanks a lot for this video. It was very helpful. I currently have a 24 crosstrack sports, the army or forest green color. The main thing I’m looking to do with mine, is an increase of the”forward approach angle” The installation you just conducted: will you show ((a side profile ))outside?, did it actually increase the vertical approach angle, as far as elevation? as you know, the departure angle in the rear is pretty decent from the factory. It’s not so much the winch I’m looking for. basically I would like the nose to be more of a canted Or beveled-upward.(I think they call it Baja design.” Dune-buggY looking.” if Subaru made, where that could be retrofitted very easily to look as such= not just the aesthetics, but actually integrated and functionality and ruggedness of the Crosstrack.(they would probably put the jeep Wrangler out of business.) I live in metropolitan areas where theres a lot of snow 2-3 months out of a year. and in order to keep progress in the cities, the streets must be constantly plowed. (Consequently),((man-made piles of from snowplows.)) because it stays below freezing in the snow doesn’t melt that quick in North eastern Massachusetts, and I go to Chicago a lot in the winter to visit folks. And that’s where this Baja design will come in handy. When major stretches of the metropolitan Street area has 3 to 4 feet of snow that’s been pushed there for blocks at a time by snowplows. Sorry for the long message. Thank you for your work be blessed.🕊️👍🏼
it DEFINITELY helped both the height and the approach angle. After I did this I wasnt scrapping like before unless I really pushed it. The approach angle is, quite frankly, absolutely horrible for an "offroad adventure" marketed vehicle. I rupped off an underglow and 2 rock lights prior to this, but not once I was done.
Looking awesome!! One of the best 2024 Crosstreks out there!
You planning on a lift, bigger tires, new wheels?
Yes. 2” Ironman lift, drop to 17-inch rims and 235/65/17 tires
IVE BEEN Looking for this video... been planning to buy and install this ... GReat Video by the way. and how can i get the white color of the bumber? the website only shows black. and also where did you get your skid plate ?
@@emtwo3121 either get it powder coated or, like me, bedliner. I prefer bedliner as you can reshoot and it looks good as new
your ride looks sick! I have the same car and I have been modding it as well. By any chance, are you running a switch panel for your lights? If so, can you do an installation video on it? Thank you, a new sub here.
Awesome video. Thank you
Thank you for the video!
Absolutely!!!
Would you recommend this on a stock height 24, it looks heavy?
I would, actually. I have a winch mounted as well. I also had concerns about the weight, but its not that bad. I thought maybe an impact to my MPG, but none and no sag. I was actually REALLY surprised.
How long did this take to assemble?
Appreciate the video! What's the weight of that bumper?
Can you do the same thing with the wilderness model ?
Yeah. Obviously the bumper is different so the cut points would be but the bumper WILL fit