This great but the problem Im having is that im running bags without a step notch and if I install one of those tanls when Im aired out Im afraid of the tank dragging on the ground
This tank will drag the group with a mini notch even if the tank is on the bottom of the frame. If you mount it to the top then you’ll have to raise your bed floor. It all depends on what your plans with the truck are. If you plan to go with a step notch then you’ll have to raise the bedfloor eventually anyways.
The quick answer is yes, if you used self tappers but the bracket already has threaded holes. It’s in a tight spot to try to run a self tapper from under the frame from that angle. If that makes sense. In the grand scheme of things, predrillng the two holes on each side is the equivalent to self tapping two holes but doing it from the top of the frame is a lot easier and using the threaded screw allows you to remove and install easily. Thanks for the feedback! A self tapper was my first thought as well!
Great stuff !!!!! Gotta ask, where'd ya get that pedestal mount for you Air LIft manifold? Thanks
www.ebay.com/itm/SR-Manifold-Stand-Pedestal-Bracket-for-Air-Lift-3P-3H-Mount-45-Degree-AirLift-/274743652126?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
This great but the problem Im having is that im running bags without a step notch and if I install one of those tanls when Im aired out Im afraid of the tank dragging on the ground
This tank will drag the group with a mini notch even if the tank is on the bottom of the frame. If you mount it to the top then you’ll have to raise your bed floor. It all depends on what your plans with the truck are. If you plan to go with a step notch then you’ll have to raise the bedfloor eventually anyways.
Is there any reason why you couldn't just use rivet nuts instead of that tank mounting bar?
That’s actually how I plan to do my next truck. I hadn’t used rub nuts before. Great idea.
Do they do custom
Yea
Where did u get that air manifold bracket that bolts to tank ?
I just typed in airlift3p mount on Amazon. I believe it was like $30
ur you running a fuel pump in the tank with that sniper efi system
Yes I am.
So the 3P mount you modified on the fuel tank
Couldn’t you run them up from the bottom and cut them flush with the frame
The quick answer is yes, if you used self tappers but the bracket already has threaded holes. It’s in a tight spot to try to run a self tapper from under the frame from that angle. If that makes sense. In the grand scheme of things, predrillng the two holes on each side is the equivalent to self tapping two holes but doing it from the top of the frame is a lot easier and using the threaded screw allows you to remove and install easily. Thanks for the feedback! A self tapper was my first thought as well!
Whose rims are on this truck please..
Transport wheels