Sir salamat sa mga idea na binibigay mo.. napaka informative at easy to understand.salamat ng marami Sir mabuhay ka oo at keep safe always,god bless po.
Yes good diagnosis we also diagnosis in automobile same like bypass the connection. I have on questions you use battery 2 12v battery why not connect 24v to exciter if put what will happen.? And to get maximum output of the genset how much voltage supply to exciter from avr ? is exciter directly connected main generator through rotating rectifier to become rotor will be electro magnet.? Avr get or use power from battery or line? Or avr use permanent magnet generate?
Magaganda po ang sharing mo about gensets sir. Tanong ko lang po regarding sa avr kung hindi nagbuild up ng voltage.pag magexcite po ba sir tatanggalin yung connection ng sensing sa avr at pati yung F1 F2?.
Yes sir tangal lahat yan sa avr kasama voltage sising e isolte mo lang tapos yung F1 F2 ay yan ang ilagay mo sa battery dapat nasa 300-500vac out normal yan
i have only two wire from excitation they don't have any marking, whether f1 or f2, x or xx, red or white. how do i understand which one is negetive or possitive that is my prblem@@benzblogsVlogs
if i accidently connect my excitation wires wrong position such as positive wire to minus port of avr and negative wire to plus port of avr does my avr became fault@@benzblogsVlogs
Sir, yung F1 at F2 ng AVR icoconnect direct sa 12V battery tapos start ung gen.set o start muna ung gen.set bago iconnect yung F1 at F2 sa battery?? Di po kasi nakita sa video ung complete set up. May problema kasi ako sa gen.set, same ng video nyo problema, nagoalit nako ng AVR ganun pa din, ibig sabhn nawala ung excitation voltage nya.
Pag nag excite ka sir dapat tangalaing mo volatge sensing tapos f1f2 yung ang i connect mo sa 12 volt habang omaandar ang engine dapat may makokoha kang voltage from 300-500 ac
@@benzblogsVlogs ibig sabhn sir, start ko muna ung gen.set saka ko iconnect yung f2 at f2 sa battery or iconnect ko muna bago sstart ung gen.set?? Same lang ba ng results yan?
Sir, new subscriber mo..matanong ko lng sir, kapag nabura na yung marka sa dalawang wire ng exciter field na may + at -,, ano ba ang gagawin mo sir? Paki sagit nman po!
If you want to know try to excite if the voltage lower down meaning you put the positive wire in nigative reverse so you know now excite again and if the volatge higher meaning that is correct polarity you holding +and -
You can but that is not safe you need you voltage sensing and excitation connected to the lamp and voltage potentiometer in order to adjust the voltage sensing to check if excitation level is increasing or not
If you want to reset thin what ever the alarm is your going to rectify first in order to reset the alarm its always vary what type of module your using
Your videos are very good. I have been watching several of them and I make sure I leave a Like so that hopefully more people will see them
Its big thank for me sir have bless evening im so happy to know that keep safe always
Sir salamat sa mga idea na binibigay mo.. napaka informative at easy to understand.salamat ng marami Sir mabuhay ka oo at keep safe always,god bless po.
Bless you to sir im happy to hear that
Ayos lods ang linaw Ng pagka paliwanag mo....ingat kagi lods
Bless u sir
Well done sir, very helpful video.
Boss ok nagawa ko na ito ayos ka talaga.
Bless you sir
Yes good diagnosis we also diagnosis in automobile same like bypass the connection. I have on questions you use battery 2 12v battery why not connect 24v to exciter if put what will happen.? And to get maximum output of the genset how much voltage supply to exciter from avr ? is exciter directly connected main generator through rotating rectifier to become rotor will be electro magnet.? Avr get or use power from battery or line? Or avr use permanent magnet generate?
It will give high excitation
Avr get power to ac and converted to dc supply where always calculating how much excitation depends on the load
To able to maintain the correct supply voltage
Ayos master flushing...
Thank you sir
Sir your video is very informative
Thanks blesa u
Really super bro
Bless you sir
Magaganda po ang sharing mo about gensets sir. Tanong ko lang po regarding sa avr kung hindi nagbuild up ng voltage.pag magexcite po ba sir tatanggalin yung connection ng sensing sa avr at pati yung F1 F2?.
Yes sir tangal lahat yan sa avr kasama voltage sising e isolte mo lang tapos yung F1 F2 ay yan ang ilagay mo sa battery dapat nasa 300-500vac out normal yan
TY
Galing m idol!ask lng idol anung problima gumagana nman Ang gen,pag tumatagal voltage down at shutdown????
Sir may load oh wala
Normal running ba 60hz or 62hz conventional 240vac with load pagtomagal nawawala? Or walang load
Pagnawalan ng voltage ting nan mo ilang natira voltahi kong miron oh zero talaga
Sir make some video on Cummins generator and controller system
No prob sir
Thank you very match
hi sir,my generator volvo 500kva, my problem is 220v output is working but change to 400v,the phasing line is no coming output
Double check the wiring and the connection of your avr and the type of avr so you do the wiring
@@benzblogsVlogs thanks sir
Hi sir ...what if exciter is fualt ...what is voltage show in module ?
If exciter is faulty thin voltage ither zero or residual volatge are there
how do i know which wire is f1 or f2 excitation wire , if there is no any color code
Okay F1 is red or positive and F2 is black or negative
i have only two wire from excitation they don't have any marking, whether f1 or f2, x or xx, red or white. how do i understand which one is negetive or possitive that is my prblem@@benzblogsVlogs
@@abdijama9108 in the avr you can see the connection
Do one thing connect the exciter to 12 vdc if the voltage give low output meaning you wrong polarity
if i accidently connect my excitation wires wrong position such as positive wire to minus port of avr and negative wire to plus port of avr does my avr became fault@@benzblogsVlogs
Good practice is using diod in positive line when you connect like this
Wich one sir thank you appriciated
Good 😊
Sir make some video na yung sira ang water sensor.
I ok sir puro bago kc yung generator for testing pag may napontang sira gagawa nlko
@@benzblogsVlogs a abangan ko yan sa blog mo sir
Sir, yung F1 at F2 ng AVR icoconnect direct sa 12V battery tapos start ung gen.set o start muna ung gen.set bago iconnect yung F1 at F2 sa battery?? Di po kasi nakita sa video ung complete set up. May problema kasi ako sa gen.set, same ng video nyo problema, nagoalit nako ng AVR ganun pa din, ibig sabhn nawala ung excitation voltage nya.
Pag nag excite ka sir dapat tangalaing mo volatge sensing tapos f1f2 yung ang i connect mo sa 12 volt habang omaandar ang engine dapat may makokoha kang voltage from 300-500 ac
@@benzblogsVlogs ibig sabhn sir, start ko muna ung gen.set saka ko iconnect yung f2 at f2 sa battery or iconnect ko muna bago sstart ung gen.set?? Same lang ba ng results yan?
@@agent70vids3 dapat dalawa kayo isa magpaandar thin isundotan mo ng 12 v
@@benzblogsVlogs ibig sabhn, start ko muna gen.set , pag nagvstart na saka ko i-tap ung 12V battery sa F1 at F2, tama po ba?
@@agent70vids3 correct sir
Sir, paano kung ok nman AVR pero hanggang 210 VAC lng ang nagagawa ng generator. Ano sir pwedeng gawin.
Sir anong avr ang gamit mo at ano ang connection mo doon sa winding para amalamn natin. Kong tama
AVR-8A tapos yung negative ng winding ay sa F- ng AVR at yun positive ay sa F+ ng AVR
Pano ang sensing mo sir at anonconnection saan ka nagtoping
Walang kng picture?
Yung sa sensing line to line ang connection.
Sir, new subscriber mo..matanong ko lng sir, kapag nabura na yung marka sa dalawang wire ng exciter field na may + at -,, ano ba ang gagawin mo sir? Paki sagit nman po!
Simple lang sir
If you want to know try to excite if the voltage lower down meaning you put the positive wire in nigative reverse so you know now excite again and if the volatge higher meaning that is correct polarity you holding +and -
Thank you so much sa sagot mo sir! Merry x'mas and Happy new year in advace
Thank keep safe happy new year
How to check avr while not connected to the generator.
You can but that is not safe you need you voltage sensing and excitation connected to the lamp and voltage potentiometer in order to adjust the voltage sensing to check if excitation level is increasing or not
@@benzblogsVlogs do you have messenger?
@@angkolmadudz8752 facebook.com/groups/1581429425388674/chats/5195138870614004
Ilang kva to sir ?
800 lng sir
Generator failed stop how con rest.
If you want to reset thin what ever the alarm is your going to rectify first in order to reset the alarm its always vary what type of module your using
Kuya, wala ka ba katrabaho na pwede mo makisuyo hawakan ang cp mo, parehas tayo nahihirapan....😫
Wala pre sensya na limited lang time ko ginagawa ko lamg to during breaktime
Hello brother how do i contact you
facebook.com/groups/1581429425388674/chats/6246955898653285