I have a 2007 Veracruz, I connected everything but no sound from speakers. Is there an amp I need to connect ? What color from the vehicle wiring harness ?
Sorry , I don’t remember. I had a few wires that weren’t being used after I hooked up the speakers and power. I touched each separately to power and I could hear the speakers start to work
Do you have any information on the stero your removing because that’s what I have in my Hyundai Veracruz 2012
I can’t figure out my back up camera if you have any videos? 2012 Hyundai Veracruz
I would install CarPlay navigation on it when you already take everything out like that
I’m considering upgrading the radio in my Veracruz. Why can’t I re-use the original harness if I get a double-din sized radio? Thanks
Which pin is to install the amplifier because if that cable is not installed there is no sound from the speakers
Thank you
I have a 2007 Veracruz, I connected everything but no sound from speakers. Is there an amp I need to connect ? What color from the vehicle wiring harness ?
I have the same issue. Did you ever end up figuring it out?
@@stevenbach7719the amp needs power. I just ran a power wire to the wires not being used to see when everything started working properly
@@junkdaddy8081 Thanks. I'll try this out later today!
No luck for me. Tried every unused wire on the radio pigtail and no luck. Do you happen to remember which wire it was?
Sorry , I don’t remember. I had a few wires that weren’t being used after I hooked up the speakers and power. I touched each separately to power and I could hear the speakers start to work
What do you do with the extra din? My stereo only uses one of the dins.
They sell single din cubbies you can add in.
How to remove instrument cluster Hyundai Veracruz