GM Bose full system integration harness kits(2007-2024)

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 มี.ค. 2021
  • US SHIPPING ONLY
    Contact me at 1pocket73@sbcglobal.net for inquiries and ordering
    These kits will work in most GM models with a Bose amplifier from 2007-2023
    Chevrolet
    Traverse Blazer Corvette
    Malibu Colorado Trailblazer
    Camaro Silverado Trax
    Impala Suburban Cruze
    Equinox Tahoe Hummer
    Volt Cobalt Bolt
    Tracker
    GMC
    Terrain Yukon
    Acadia Sierra
    Canyon
    Buick
    Enclave Verano
    Encore Lacrosse
    Regal Lucerne
    Envision Envista
    Cadillac
    Escalade XT4 SRX
    CT4 XT5 DTS
    CT5 XT6 ATS
    CT6 XTS CTS
    ELR Lyriq
    Pricing:
    1.Harness kit with standard 12 inch wire leads........$150.00
    2.Harness kit with attached PAC-LP74(4 ch)...........$192.00
    3.Harness kit with attached Wavtech Link-4(4 ch)..........$375.00
    4.Harness kit with attached Wavtech Link-6(6 ch)..........$430.00
    5.Harness kit with attached Audiocontrol LC6i(6 ch)......$380.00
    6.Harness kit with attached Audiocontrol LC7i(6 ch)......$400.00
    7.Harness with attached Audiocontrol LC8i(8 ch)......$475.00
    Extended wire leads(covers all 3 harnesses)..........$15.00 per ft

ความคิดเห็น • 405

  • @robbase7255
    @robbase7255 16 วันที่ผ่านมา +1

    2024 Chevy Tahoe RST
    I bought a harness from John and it worked great! All of the plugs were correct and fit was like factory. Also, he sent good instructions and all of the wire pin outs were correct. It was a great solution. My installer also gave a big thumbs up for the product and mentioned the great quality. Thanks!!! RLBJR

  • @rhinolinings4995
    @rhinolinings4995 ปีที่แล้ว +7

    Just had John create a custom harness for my 2023 Silverado with Bose. He did a great job for me. I love how I didn’t have to cut any of my factory wires to make this work. Very happy!

    • @naughtyca131970
      @naughtyca131970 9 หลายเดือนก่อน

      this should be the same for my 2023 GMC 1500 with Bose right?

  • @tandrinanchorager1846
    @tandrinanchorager1846 22 วันที่ผ่านมา +1

    Excellent communication as John walked me through what he needed and what I needed for my install. Delivery time was quick and so were his responses to my emails. The harness was a simple and seamless install for my 2023 Sierra AT4 with Bose (or should I say Focal and Audison sound system!). Highly recommend!

  • @rhurtadorh32
    @rhurtadorh32 6 หลายเดือนก่อน +3

    Thank you mr john for the harness you made me for a 2017 buick enclave with bose system. I was glad that i order a extra feet of wire length since its very tight in space. And definitely you have better customer service than llj customs, they take 4 days to reply to your emails and text messages. I would definitly order more harnesses from you on future installs

    • @docotis420666
      @docotis420666 3 หลายเดือนก่อน

      I couldn’t get a response from them unless I blew up texts and the date kept getting pushed back

  • @luisvillalobos4976
    @luisvillalobos4976 หลายเดือนก่อน +1

    I recently had John from AIS integration make me a harness kit for my 2014 Cadilac Escalade Luxury with Bose factory amp and I just installed and it is very good. Had ANC and output to for signal and input for easy speaker installation . So have no doubts if you don’t want upgrade your factory radio. These are very good. I went to several audio installers and no one would do it but John from AIS has the perfect solution for you.

  • @nickhafner4447
    @nickhafner4447 11 หลายเดือนก่อน +5

    Ordered a harness for my 2019 Canyon with Bose a few weeks ago and finished the install this weekend. It worked great and was so much easier and cleaner than hacking into the wires myself. Turn around time was surprisingly fast and every interaction was helpful and professional. Very happy with my purchase and would highly recommend!

  • @karlledwig1041
    @karlledwig1041 2 หลายเดือนก่อน +1

    Worked with John a few months ago for the harness for my 2023 Silverado 1500 LT-Non Bose(IOK) and the correspondence and ordering was top notch. Awesome craftsmanship/quality. Just completed the installation and no issues. Way to go, John! Depending on your situation/installation if you find the chime/turn signal is louder than factory after installing any aftermarket amps with this harness, adjust your front left amp gain down to compensate.

  • @eliasleon495
    @eliasleon495 8 หลายเดือนก่อน +2

    Thank you John got my hardness for my 2019 trailboss plug and play
    Works good 👍🏼

    • @derricklesane3114
      @derricklesane3114 2 หลายเดือนก่อน

      Did u have to use the anc plug

    • @eliasleon495
      @eliasleon495 2 หลายเดือนก่อน

      @@derricklesane3114 yes sir

  • @hhansen599
    @hhansen599 หลายเดือนก่อน +1

    Thank you, John. The harness you sent me is amazingly easy to connect. The instructions you sent along were also helpful. I will be using you again. Holy hell The chevy bolt is hittin hard and clean

  • @Signatureofheaven
    @Signatureofheaven ปีที่แล้ว +2

    I just want to say Thank you so much for taking care of our Car Audio needs. We had a client come in with a 2023 GMC Sierra 1500 Elevation w/Bose system and he wanted a full stereo upgrade. We kept the headunit and needed a harness that would work perfectly and without splicing the factory wiring. That's when I saw this video and contacted John and he told me exactly what I needed and what he could do. We received the harness and I will say that this thing was impressive. Looked great and the quality was awesome. Plugged right in and he had perfect detailed instructions 👌 and it was the perfect touch for what we needed. If you are needing a harness, this is the guy to go too. We run Signature of Heaven, a Car Audio & Detailing shop in West Liberty KY.
    Thank you again sir for your professionalism and dedication to your art! Will be ordering again from you.

    • @Grayback1973
      @Grayback1973  ปีที่แล้ว +1

      Thanks so much for the kind words Harrison! It was a pleasure to be able to help you out:)

    • @tinman27545
      @tinman27545 ปีที่แล้ว

      @@Grayback1973 how do I order these adapters? I have a 2017 GMC 2500hd Denali with the Bose system. Please let me know how to go about ordering it. Thanks

  • @mjulien1000
    @mjulien1000 2 ปีที่แล้ว +3

    2020 Trail Boss with Bose thanks for your communication during the process of ordering your product. The t harness I ordered was easy to to install and worked as described. He emailed me a wiring diagram just as it was shipped.

    • @JJ-fe3vb
      @JJ-fe3vb ปีที่แล้ว

      Hey brotha how can I order a harness for my truck can u help me out

  • @JorgeGomez-cl4pv
    @JorgeGomez-cl4pv ปีที่แล้ว +2

    Jorge Gomez
    John provided me a speaker wire bypass for my 2013 GMC Denali with a Bose system and everything works perfectly. It saved the time of having to remove door panels and run speaker wire. Thank you!

  • @FatkidTheBoss
    @FatkidTheBoss 5 หลายเดือนก่อน +1

    I got a harness from these guys! Worked perfect. Thank you sir. ****warning**** if your working on a ‘15 traverse with factory BOSE stereo the amp is up above the drivers side kick panel in the dash and the harness plugs into the side facing the firewall. There is about 0 clearance back there and it is a major pain in the ass to unplug and replug the new harness. I spent 3 hrs trying to fit my big ass hands in there and hold the plug the right way while curling my left pinky toe in a semi circle upwards and kinking the right corner of my mouth downwards at a proper 35* angle all while blinking my left eye at exactly 88 mph and twitching my nose like Samantha from bewitched to get this plugged in. After that all was a breeze and my system sounds phenomenal along side the stock BOSE system. Good luck to ya hope you’re not busy for about a month man…. 🤣😂🤣😂

  • @EricLarsonatpRC
    @EricLarsonatpRC 3 หลายเดือนก่อน +2

    John does very nice work and great communication. I would 100% recommend his services. Everything arrived and worked out perfect. 2024 GMC 2500 AT4. 👍👍👍👍

    • @eliasleon495
      @eliasleon495 2 หลายเดือนก่อน

      His does love his work great person to deal with him his on top of things 👍🏼

  • @bodaciuos357
    @bodaciuos357 8 หลายเดือนก่อน +2

    thanks john for making my harness for 2018 Mazda cx 5. it worked perfect. with no issues. another harness in your belt. thank you for taking your time to help me out.
    greatly appreciated. ***** 5 stars ***** well worth the money

    • @Grayback1973
      @Grayback1973  8 หลายเดือนก่อน +1

      Very happy it worked out for you Luis. I don't typically build harnesses for Mazda but apparently it worked out.....:)

    • @bodaciuos357
      @bodaciuos357 8 หลายเดือนก่อน +1

      @@Grayback1973 you should put that on your portfolio , it will come in handy . I'm sure the other Mazda's are simular if not the same

  • @arielleon2224
    @arielleon2224 ปีที่แล้ว +3

    Worked like a charm on my 2014 Cadillac Ats well worth the wait and money. I will be referring his work to others. Pretty straight forward and answered my questions when I asked thank you John.

    • @jlabovejr
      @jlabovejr ปีที่แล้ว

      Does the harness bypass the amp signal cross overs as well?

    • @trentspencer3788
      @trentspencer3788 ปีที่แล้ว

      How do i oder one of these?
      Or get ahold of him?

  • @Lateralacceleratio2
    @Lateralacceleratio2 8 หลายเดือนก่อน +1

    Ordered the harness and received in about 10 days. Which was ahead of estimated time to begin with. Harness was beautiful. Very clear instructions on what goes where.

  • @glenngosson1369
    @glenngosson1369 ปีที่แล้ว +3

    I ordered a simple single pigtail for my 2022 Silverado LT refresh. It made installation of the Kenwood SW-11 under seat amp that I kept from my previous vehicle a breeze. He sent all the speaker wiring info and was very responsive to multiple questions throughout the process. Tip of the day watch the video to ensure you know where the locking tab is!!!

  • @jcsmith3773
    @jcsmith3773 ปีที่แล้ว +1

    Awesome harness John. Thank you so much for making it so simple to install. I’m am shocked on how much better my music sounds now. Again Thank you so much.

  • @davidscott4849
    @davidscott4849 3 ปีที่แล้ว +7

    John made me a harness for my 2020 Silverado Trailboss with Bose. Literally took 15 minutes to remove the rear seat and install. He prewired the inputs and outputs for my Audio Control amplifiers. Works flawlessly. It doesn’t get any easier. This is my second harness from him. He is the man for this!!

    • @piratatv1621
      @piratatv1621 2 ปีที่แล้ว

      How's the sound quality?

  • @chrisstein9488
    @chrisstein9488 ปีที่แล้ว +1

    Didn't find anywhere else to leave a review, so I'll do it here.
    Ordered the full kit: T-harness with 13ft loopback harness, no ANC for my 2022 GMC Canyon Crewcab Bose system. Top notch quality materials. I have my amp against the back wall behind the driver. 13ft of loopback was a little over a foot too long. So if you have a Canyon or Colorado, and want the loopback (makes install MUCH easier), then I'd go 12ft if you're amp is on the driver's side, 11ft if it's in the middle of the back wall, and 9-9.5ft if your amp is on the passenger side. Its all plug-n-play except you need to solder (or crimp-connect) the add-on amp's speaker output harness to the speaker output loopback harness. And depending on your amp, fix the factory amp speaker output loopback harness to your amp's high-level inputs. Thanks, John. Would absolutely do it again.

  • @damiancrouch1757
    @damiancrouch1757 ปีที่แล้ว +1

    I have 2014 Chevy suburban with Bose I upgraded my head unit and amps but I wanted to retain factory speaker wiring John sent me a adapter that let me plug into the factory wiring and bypass the factory amp everthing was plug and play great customer service

  • @michaelortego7178
    @michaelortego7178 2 ปีที่แล้ว +1

    RECEIVED MY BOSE AMP BYPASS HARNESS TODAY AN INSTALLED IT IN MY 2011 GMC TRUCK TO MY NEW AFTER MARKET HEAD UNIT IT WAS WELL MADE AN EASY TOO HOOK UP WITH THE DIRECTIONS THAT WERE EMAILED TO ME THANKS JOHN

  • @johnspangler4276
    @johnspangler4276 3 ปีที่แล้ว +5

    I have a 2020 Silverado RST with Bose. The only place I could find to buy a harness had a 3 week wait and a lot of negative customer feedback. Luckily I came across John who I ordered from and had in hand within 5 days! Harness works perfectly and came with detailed instructions, great guy to work with!

    • @Grayback1973
      @Grayback1973  3 ปีที่แล้ว

      So glad it worked out for you John,thanks for the nice feedback!

    • @baes1989
      @baes1989 ปีที่แล้ว +2

      @@Grayback1973 hey how I can get in contact with you I need a harness for 2020 sierra

    • @arodrigu2030
      @arodrigu2030 ปีที่แล้ว

      How can I get a T harness ordered

  • @djmr.patterson6828
    @djmr.patterson6828 8 หลายเดือนก่อน +2

    There is no better way to add an external amplifier to your Bose system than with one of these harnesses. I ordered a harness for my 2020 Silverado and it worked with no issues. He will send instructions describing each harness, the wire colors, and installation. It took about a half hour to install everything and now I'm shaking the traffic signals when I pull up with the sound I now have.

  • @Jerry4baker
    @Jerry4baker ปีที่แล้ว +1

    Keep it up man so much info compared to the other guys. It's so much more helpful and I'm happy you send instructions can't wait to figure out what i need.

  • @rustyolsen8564
    @rustyolsen8564 3 ปีที่แล้ว +4

    John made me a harness for my 2007 duramax new body style with Bose to amp my aftermarket speakers. It works flawlessly great product and saves a lot of time and hassle. Highly recommend using John!!!

  • @2112warpig
    @2112warpig 5 หลายเดือนก่อน +1

    John's harnesses and the Lc8i line converter work like a dream in my 2017 Sierra- with the Bose amp. JBL stadium speakers are now rockin' like they should and the twin 12" subs are shakin' the rearview mirror. This is the way to go if you want premium sound. Thank you, John! Best regards and Happy New Year! Brian McLaughlin

  • @davidadams7352
    @davidadams7352 3 ปีที่แล้ว +4

    Just wanted to say thank you to John for making me a harness for my system. I have 2017 GMC Sierra crewcab with Bose system. Audio control LCQ-1 line out converter and JL audio 5 channel amp. JL audio shallow mount 12” sub. Everything was a breeze to wire up thanx to John providing the wiring directions. I can now hear my rear door speakers very well. System sounds amazing now. Thank you thank you thank you.

  • @alexanderpawlowski6639
    @alexanderpawlowski6639 ปีที่แล้ว +2

    Ordered a harness for a 2022 Trailblazer LT. John worked with me to determine the correct harness to make based on photos i provided and the quality of the item was amazing!

  • @AG-mc8or
    @AG-mc8or 3 ปีที่แล้ว +2

    I ordered a harness from here and am really happy with it. I appreciated the fast communication and all the help figuring out how to make it work with my setup! 👍🏼

    • @kevinharris5792
      @kevinharris5792 2 ปีที่แล้ว

      How can I order a harness for a 08 Escalade

  • @jerrywood8078
    @jerrywood8078 3 ปีที่แล้ว

    I installed an integration harness with attached amp harness in my 2020 Chevy equinox. I was very impressed with the sound and the ease of installation. Would recommend for anyone with a newer vehicle to get in touch with A.I.S audio. Was very helpful and knowledgeable. Thank you again A.I.S audio.

  • @LAZYLOS61
    @LAZYLOS61 2 ปีที่แล้ว +2

    2019 Cadillac XTS, Thank you for your hard work and great communication. I bought this 3 mounts ago and installed it recently. Today I am finally done with the tuning. So everything he said is true and correct but I found it better for my setup to use the fronts and subs speaker wires summed to the LC7i. I say this because bose has something weird going on with rear outputs. So by using the front and subs summing you get the full spectrum. Now from here you can do what ever you want. I am going to a JL audio TWK88 to a 4 channel alpine and a alpine M1000. 4 JL audio 6.5, I also have 8 one inch tweeters and the M1000 is pushing 3 JL audio 12 W3-3 wired down to 1.3 ohms!!! Yes I know it’s not rated for nothing lower then 2. But I I heard people have been doing it. Again great product!!!! And great communication!!!

  • @davidc2348
    @davidc2348 7 หลายเดือนก่อน +1

    I ordered a harness/dual-amp setup for my 2015 Tahoe. It took (much) longer to remove the panels, seat belt, etc., than it did to connect/install/adjust the amps. I combined this installation with a new radio module, HMI, Power Bass USA 2-ohm speakers, and GM/Kicker sub. The truck sounds incredible, better than I ever could have expected. The bass is tight, and the sound is significantly more dynamic and powerful. The best part is the truck still looks 100% stock. There is no difference in appearance...which is what I was shooting for. Thanks, John!

    • @Grayback1973
      @Grayback1973  7 หลายเดือนก่อน

      I'm so glad it worked out David! For anybody who is curious, David had me wire in an Alpine KTP-445U Powerpack for the front tweeters and doors along with a 2-channel JBL Stage A6002 for the rear door speakers. Both amps were able to run off of the Factory 12v circuit so that it was 100% plug-n-play with no need to run a 12v and ground for either of the amps.

  • @bodaciuos357
    @bodaciuos357 6 หลายเดือนก่อน

    THANK YOU JOHN ! I have installed the harness for my sons 2017 chevy equinox LS. worked perfect. even though the harness could only be used for the front door speakers and tweeters. all i need to do was tap into the wire for the back doors. He was very helpful. and easy to communicate with my stall. He was always available to answer question's and send diagram for my vehicle wire coloring chart. thanks again john. this was my second purchases for his harness . i will look you up for any future harnesses for sure.

    • @Grayback1973
      @Grayback1973  6 หลายเดือนก่อน

      Awesome Luis, I am very happy it worked out for you. Thank you for the kind words!

  • @motoreese9431
    @motoreese9431 3 ปีที่แล้ว +1

    John made me a harness for a 2018 ats luxury. It was too easy to install literally plugged in 3 plugs and that's it. Made an amp rack the same day. Took about 3 hours to make and install the rack...Amazing product. Took about 5 days to make 3 days to ship. Thx

  • @darrickiam
    @darrickiam ปีที่แล้ว +2

    Thanks John for the awesome harness. You are a man of your word, you said 7-10 days and I got it in 8 days. This harness work great with my Bose system.

    • @Grayback1973
      @Grayback1973  ปีที่แล้ว

      Thanks for the kind words Darrick.Enjoy your new audio system:)

    • @mikepeterson4503
      @mikepeterson4503 ปีที่แล้ว

      ​@@Grayback1973 how can I get ahold of you for a t harness for bose system?

  • @docotis420666
    @docotis420666 2 หลายเดือนก่อน +1

    Finally got around to installing my harness. Works and fits perfectly. If I had one complaint about it I would like to see it made with thicker gauge wire like a 14 or 16 gauge. But other than that it is perfect.

    • @Grayback1973
      @Grayback1973  2 หลายเดือนก่อน

      Thanks Shawn, just curiously why would you want thicker gauge wire? I believe the vehicle speaker wiring is 18 or 20awg is it not?

    • @docotis420666
      @docotis420666 2 หลายเดือนก่อน

      @@Grayback1973 i believe the factory is 16 gauge going to the doors and factory rear sub.

  • @Rufdog3
    @Rufdog3 ปีที่แล้ว +1

    I ordered my kit From you back in March of this year For my 2014 Buick verano and install it In mid may of this year Everything is as you said it would be my system is performing beautifully Thank you for your help Keep up the good work.
    Sincerely , RTMJR🎶🎶🎶
    👍👍👍👍👍

  • @RALPH531967
    @RALPH531967 3 ปีที่แล้ว +1

    I ordered the plugs for my 08 CHEVY AVALANCHE LTZ with Bose system so I can connect my own amp to my door speakers John sent me the plugs that I needed and now my music is awesome, the only problem is that the chimes from the seat belt and park assist are also amplified but I deal with it, it’s worth it ,couldn’t be happier. Thank you John.

  • @joelcorral7503
    @joelcorral7503 3 ปีที่แล้ว +6

    Ordered a harness for a 2019 non Bose Chevy Traverse a few weeks ago. Finally got around to installing everything. Harness worked flawlessly and really simplified the installation. I’ve got to say, John was very professional and helpful/informative throughout the entire order experience. I have waited for about 2 years trying to find what I wanted to avoid hacking into the stock wiring and this was exactly what I was waiting for. Hooked up a 4 channel to the mids and highs, as well as a mono for the sub. Extremely happy with my purchase and would recommend these harnesses to anyone in need.

    • @fatboyj378
      @fatboyj378 2 ปีที่แล้ว

      I need a harness for a 2014 gmc Acadia with bose amp for a 4 or 5 channel amplifier can you help me

    • @jimmyvandevelde665
      @jimmyvandevelde665 ปีที่แล้ว

      how can I reach mr Adams?

    • @rhurtadorh32
      @rhurtadorh32 7 หลายเดือนก่อน

      @@fatboyj378i just ordered a harness from him for a 2017 buick enclave which it should be similar to your acadia.

  • @jmoore7362
    @jmoore7362 2 ปีที่แล้ว +2

    Got a harness today and looks fantastic. Hopefully get it in tomorrow. 2021 RST Black Widow

  • @kevinm2404
    @kevinm2404 ปีที่แล้ว +1

    Installed full system harness, easy as pie, ran signals to a lc7i then outputs from my 4 channel amp. Running components up front and coaxial in rear doors. Truck is 21 Sierra 2500HD non bose

  • @danlang75
    @danlang75 ปีที่แล้ว +4

    I used John's harness for my '23 Sierra w/Bose and it worked like a champ! Glad I found this video when researching how to add an amplifier to the Bose system because after reaching out to him he had it out to me in short order and is exactly what you need to get the job done in the most efficient way possible. Plus, you can go back to stock in a minute if you need to because no wires are cut to use this harness. Thanks!

    • @joshuaplace9095
      @joshuaplace9095 ปีที่แล้ว +2

      Did you add an LC2i or anything similar? Or just an amp and subwoofer? I have the same truck and planning on installing a subwoofer as well. Are you experiencing any bass roll off? And lastly does the tiny bose subwoofer still work to compliment the added sub?

    • @danlang75
      @danlang75 ปีที่แล้ว +1

      @@joshuaplace9095 I used an amp with high level inputs so no LOC was needed in my application. There is some bass roll-off from the Bose amp, but using something such as the LC2i with AccuBass can help with that. The Bose subwoofer is still active with this wire harness but I would suggest making adjustments to your new amp/sub with the bass setting on the head unit at half, then when you turn up the master volume the Bose sub isn't struggling as much and your other speakers can play louder as well.

    • @joshuaplace9095
      @joshuaplace9095 ปีที่แล้ว +1

      @@danlang75 thank you for the input and feedback I appreciate it!

    • @dlindsey106
      @dlindsey106 ปีที่แล้ว

      Hey I have the same truck. Did you have to take into account time delay or all pass filters

    • @danlang75
      @danlang75 ปีที่แล้ว +1

      @@dlindsey106 I used a DSP to handle time delays, along with correcting the signals coming out of the Bose amp.

  • @jmoore7362
    @jmoore7362 2 ปีที่แล้ว +3

    Got it all installed today. Great workmanship in the harnesses. Very easy install. Used lc6I and summed all channels. Also have tweeters still using bise amp as to not amplify door chimes. Still using stock speakers and the quality in sound jumped by at least 75 percent. Can hardly wait to install new door speakers. I am using a 25 year old PUNCH DVC 10 and hit is hitting pretty hard. Using Auddison Sr 5.600. All in all I am very happy with my purchase.

    • @codyposey122
      @codyposey122 ปีที่แล้ว

      How do I order one

    • @vanilla-vice
      @vanilla-vice ปีที่แล้ว

      @@codyposey122 he replied with his email to a couple comments asking how to order. Just gotta scroll down a bit.

  • @freddysalinas7578
    @freddysalinas7578 3 ปีที่แล้ว +2

    John,
    I appreciate all the help. I have 2011 Chevy Silverado LTZ with the Bose system which I was able to bypass with this harness and it works perfectly.
    I currently have a Kenwood Deck, aftermarket 6 1/2 inch speakers wired to a 4 channel amp, and two 12 inch sub woofers. Again, thank you, John.

    • @Grayback1973
      @Grayback1973  3 ปีที่แล้ว

      Thanks Freddy, I'm glad it worked out good for you👍

    • @JJ-fe3vb
      @JJ-fe3vb ปีที่แล้ว

      @@Grayback1973 I’m wanting to order a harness for my 2021 GMC Sierra 1500 wit the Bose system

  • @jeremywilson6506
    @jeremywilson6506 ปีที่แล้ว +6

    I have used John twice now and will continue to be a customer for life. His work is superb, harnesses are neat with excellent construction. My latest project is a 2019 Silverado RST with Bose; harness went in without issue and the new system sounds amazing.

    • @jlabovejr
      @jlabovejr ปีที่แล้ว

      does the harness bypass the bose eq and factory roll off as well? i'm definitely interested in getting one

    • @jeremywilson6506
      @jeremywilson6506 ปีที่แล้ว

      @@jlabovejr No, but could easily be wired into a DSP or EQ to customize your needs

    • @jjesusochoa8026
      @jjesusochoa8026 ปีที่แล้ว

      Do you know how to order one?

    • @michaelthornton3152
      @michaelthornton3152 ปีที่แล้ว

      How did u order from him

  • @Codename_Leo
    @Codename_Leo ปีที่แล้ว +1

    Ordered harness for 2017 Cadillac XT5 Luxury and recently got everything wired up. I attempted to get a harness built by another company and they didn’t get me what I needed along with having terrible customer service. I stumbled upon this video and made contact. John and I spoke on the phone and he was able to get me a harness that was specific to my vehicle. He’s very professional, knowledgeable, provides detailed instructions, and does quality work in a timely manner at a fair price. The harness works flawlessly! Now all I need to do is replace my door and dash speakers and get everything tuned.

    • @Grayback1973
      @Grayback1973  ปีที่แล้ว

      Thank you for the kind words Ahmad. Curiously, how well do the Bose powered front center and rear midranges blend in?

    • @robertjackson88
      @robertjackson88 ปีที่แล้ว

      Hey John can you make me a harness for a 2020 Denali sierra 1500

    • @eliteflooring513
      @eliteflooring513 ปีที่แล้ว +2

      What is the website or email to order harness?

  • @TheLowlow1968
    @TheLowlow1968 2 ปีที่แล้ว +2

    Ordered and received my harnesses for my 2015 Yukon XL Denali and My wifes 2015 Chevy Suburban. I couldn't be happier, great guy to work with I asked more questions than most to make sure I did in fact order the correct harnesses and he always responded quickly and answered all questions with very accurate pricing. The harnesses are high quality and well made to say the least. Thanks for a quality product that's very easy to install. Plug and play is exactly what this was. Thanks!

  • @blkicemike4857
    @blkicemike4857 11 หลายเดือนก่อน

    Hey Jon I have a 2017 Silverado 1500 extended cab, Bose factory system,. I hav purchased an Android 10.1 in head unit. I tried the plug and play harness they sent with unit and everything works except no sound. I purchased the aftermarket unit so I could use my aftermarket amp 8000watt with two 12inch subs in truck box under backseats. I need appropriate harness/harnesses,..
    a few weeks ago I bought the inverter for adding an amp,.it worked for about 2weeks then stopped working,. The amp still had green light as if it was still operational,. I figured it was burned out, so I replaces it with a new one, still same thing, green light but no sound,. From what I have read these inverters are not compatible with Bose factory amp,. Thus I went another route and bought a new head unit so I could have use of my subs ,amp, and bigger screen,. So I figure I need a wire harness so am able to keep steering controls,not worried about satellite radio,or on star, I don’t ever use either of those,..
    I am curious as to how much it will cost for the harness to get me up and thumping again,..

  • @kentknox8896
    @kentknox8896 ปีที่แล้ว +2

    First I bought a loop harness from LLJ and the harness was JUNK.LLJ hides behind TEXT messages And no customer service.
    I email John to help me get a REAL harness for my sons 2020 gmc1500 and 2 days later it arrived and installed it and with no problems and John does exactly what he says . THANK YOU THANK YOU

    • @Grayback1973
      @Grayback1973  ปีที่แล้ว +1

      Thanks for the kind words Kent and I am very happy everything worked out for you:)

    • @rhurtadorh32
      @rhurtadorh32 7 หลายเดือนก่อน

      You are right no customer service at all. So as of today i contacted john hopefully he gets back at me right away.

  • @edgu71eg
    @edgu71eg 3 ปีที่แล้ว

    Omgeee
    I've been needing this
    I have a 2015 Chevy Highcountry w/bose system...I need this harness please.

  • @baes1989
    @baes1989 ปีที่แล้ว +2

    Hey John can u make a kit for my 2019 GMC Sierra 1500 new body style I’m planning to add two amps one for the subwoofers and 1 for the door speakers I have the Bose audio but I’m not sure if it has subwoofer inside but it has the one piece console and it has the amp in the rear seat

  • @gc7155
    @gc7155 ปีที่แล้ว +2

    Ordered a harness for a 2016 Tahoe with Bose. The instructions were very clear. The process took about an hour to complete. Could be less but I soldered all my connections. The new subwoofer and mids/highs sound excellent. John you are definitely 5star!!!

    • @gc7155
      @gc7155 ปีที่แล้ว

      If you have the Bose with autopilot. Make sure you turn it off in the menu to avoid sound attenuation.

  • @bennysr5220
    @bennysr5220 4 หลายเดือนก่อน

    Hi John, great video do you still need to do this? When you change your head unit on a 2012 GMC Denali.With Bose thank you

  • @chrisrodriguez7672
    @chrisrodriguez7672 ปีที่แล้ว

    Good video, I got a 22 Chevy blazer. Bose Amp . Had speakers installed at a speaker insulation place ,they tapped in after the amp underneath passenger and driver side kickboard. I have been getting a hum or bass seems to be amplified noises ever since . What kind of harness can I use ?

  • @gntundragnt4210
    @gntundragnt4210 2 ปีที่แล้ว +3

    I ordered a harness from this guy a year ago. I recently traded in my car, another GM . I wanted to see if the harness he sold me could be used on my new vehicle. Emailed John and he got back to me almost instantly! Great customer servive. Thank you John. 👍👍👍
    PS: It did work and the car sounds awesome!

    • @JJ-fe3vb
      @JJ-fe3vb ปีที่แล้ว +1

      Can U help a brotha out How do I contact this guy so I can order a t-harness

  • @OEFVETERAN
    @OEFVETERAN 7 หลายเดือนก่อน

    Is it better to bypass Bose amp altogether or just have a single t-harness for the signal to the LOC? I’m just trying to add my sub box and amp in addition to the Bose system. Am I wrong in that thought?

  • @felipegarcia2419
    @felipegarcia2419 11 หลายเดือนก่อน

    I already have a Bose amp bypass hooked up to a amp. Now I’m looking at upgrading door speakers. What harness will I need to get a 4 channel amp on?

  • @AccuracySpeaks
    @AccuracySpeaks 11 หลายเดือนก่อน

    How bout factory amp bypass harnesses for a 2003 Tahoe? Do you know where I can get the connector pins for the GM wiring harnesses? Great channel by the way!!

  • @jameslavinder4368
    @jameslavinder4368 ปีที่แล้ว

    Do you make a bypass for the 2008 Tahoe with Bose to where all I have to do is run my speed wire from behind the radio to my amp. Cause I will be replacing factory head unit and all door speakers and adding mids and high amp along with a sub amp.

  • @arnulfopaz1790
    @arnulfopaz1790 หลายเดือนก่อน

    So on the green female connector it’s both dash speakers and both rear speakers ? And on the other black and white plug it’s the front door speakers?

  • @jeffwatkins3529
    @jeffwatkins3529 ปีที่แล้ว

    So the seat belt and door chimes are also amplified with the harness? Is there a way to get a harness that doesn't do that?

  • @othelloproductions1
    @othelloproductions1 ปีที่แล้ว

    How can I order for a 2016 Traverse to Bypass the Bose System. This is amazing THANK YOU!!!!!

  • @02denaliyukon82
    @02denaliyukon82 2 หลายเดือนก่อน

    I got a 2013 yukon denali with bose system. I noticed you said for factory headunit. I have a after market headunit. Would this harness still work for me or would it be a different harness. My stock stereo comes with the square plug . Thanks

  • @jordanabbott9409
    @jordanabbott9409 3 ปีที่แล้ว

    Will going with an after market amp amplify the chimes as well?

  • @1helidude
    @1helidude 10 หลายเดือนก่อน

    Hi I’m looking for help for 2017 Cadillac ATS low inputs to stock amplifier. My subs don’t play low frequencies due to amp output limitations that protect stock woofer. Lowest that comes out of stock amp is 34hz. Anything lower is cancelled out. So I want to delete my high-lo converter and find a single low input to stock amplifier + and - directly into my amp. I like your organized wiring harnesses. I bought some splice jumpers and tapped in that way just to run my subs. Any help would be greatly appreciated!

  • @luckynumb1
    @luckynumb1 2 ปีที่แล้ว

    I have a 2016 Chevy Malibu Trim LT (not Malibu Limited LT) what harness is best for me, I just need a sub added. I already have a LC2i! I would like to keep factory speakers with same power

  • @xavierbuscato9427
    @xavierbuscato9427 2 ปีที่แล้ว

    You mentioned the active noise cancellation bypass. What does that mean? It disables the active noise cancellation?

  • @johnmarin9679
    @johnmarin9679 2 หลายเดือนก่อน

    Hey John i have a question i would like to install a line out converter i do have the Bose system in my 2011 Buick enclave but i just want to know if I use these harness would I lose my steering wheel control

  • @chancehardenbrook6721
    @chancehardenbrook6721 ปีที่แล้ว

    Hey John, do you offer a harness that can completely Bypass a factory Bose amplifier in a 2012 GMC Sierra SLT? Having a problem where I have no warning chime, no turn signal sound and the radio functions properly just does not play any sound at all. Thank you!

  • @colomis24
    @colomis24 ปีที่แล้ว

    I've got a 2022 Sierra refreshed model with the 13.4" infotainment system and the factory bose kit. I'd like to just add a subwoofer - do you have a harness that will allow me to do this?

  • @dzlfumz20
    @dzlfumz20 ปีที่แล้ว

    Hi, sorry to comment on this video but i am looking to get a harness built for my 2016 Chevy Silverado 2500 with Bose. How do i go about getting one?
    Thanks in advance! Great tutorial video btw

  • @danielsimmons1009
    @danielsimmons1009 9 หลายเดือนก่อน

    I have a 2014 Silverado ltz with Bose amp/system. Do these harnesses help with aftermarket radios?

  • @1963rockhead
    @1963rockhead 3 ปีที่แล้ว +1

    As an adult, there are a lot of things that I am truly grateful for. Discovering John is almost at the top of that list...no offense John, but my Wife might read this. Your Harness and your help enabled me to complete the system that most people can only dream about. I would have paid double what you are asking knowing now how well things have turned out...Thank you once again.

    • @Grayback1973
      @Grayback1973  3 ปีที่แล้ว

      I'm glad things turned out good for you Mark. I'm a little confused as to what you did with those dash speakers,can you explain in a little more detail? Thanks

    • @1963rockhead
      @1963rockhead 3 ปีที่แล้ว +2

      @@Grayback1973The Bypass Harness Kit I purchased from you also contained a Female adapter (PART 1) which I simply connected to the original male speaker plug that was connected to the Bose amp. This enabled me to access and use my factory speaker wiring without cutting any wires. The second part of the harness assembly (PART 2) connected directly to the Bose amp and had all 7 output channels from the Bose amp. You explained to me that my Bose amp was actually a 7 channel amplifier. 2 tweeter channels - crossed over at 900 and above for the dash speakers (OnStar, phone and chimes), 2 (FULL RANGE) channels for the rear door speakers, 2 mid bass channels for the front doors - crossed over at 900 and below - and 1 sub channel. I have the LC6i which has 6 High Power channel inputs...sub, rear and front with internal (summing) capabilities. I hooked the Harness #2 wires to the LC6i sub to sub, rear to rear and front to front and then (summed) all 3 channels for a full range output to feed the rest of my equipment. The highs in this set up were contributed by the FULL RANGE Rear speakers...As far as the dash speakers go, I connected the Tweeter channels from the harness (PART 2) directly to the speaker wiring harness ( PART 1) that you provided me and sent that signal to the dash speakers. I ordered 3' leads on both of the Harnesses which allowed easy installation. The rest of the wiring from (PART 1) harness was ran directly to output of my new amplifiers. Thank you for clearly Identifying all of the Harness wires for us. I actually printed off a copy of the diagram that you provided, cut the labels into strips and used them as labels on the actual wires themselves. I hope that this isn't too diluted, but I'm a bit of a perfectionist and I hope that this will help other people. MY SYSTEM SOUNDS AMAZING...

    • @Grayback1973
      @Grayback1973  3 ปีที่แล้ว

      @@1963rockhead So interestingly you did not use the stock dash tweeter signals for inputs into the LC6i. You used the front doors,rear doors and sub and summed them all. I think I am understanding this clearly? I am kinda surprised that the stock tweeters playing off of the Bose amp are keeping up with your aftermarket stuff.

    • @1963rockhead
      @1963rockhead 3 ปีที่แล้ว +1

      @@Grayback1973 I replaced the tweeters with Digital Design 2.75 factory fit upgrades. The 4 other Sony Replacement Door Speakers are True Co-axles. I also added 2 extra Dome Tweeters behind the rear head rests - and tapped them off the rear door speakers - to brighten up the sound stage a little bit. The dash (tweeters - speakers) are not really tweeters in my opinion, the ones that I added in the rear are simply the same Dome tweeter that comes with the co-axles that I purchased, just sold as an individual speaker with an inline capacitor already installed. The Factory Bose speakers that came with the truck are all just paper speakers with out an actual tweeter, no dynamic's at all...flat sounding and dull. The new system is not tinny or brassy sounding as one might expect by my description, but full and mellow. From the Audio Control LC6i the signal goes to the Audio Control EQX. The EQX allows me to do everything with the signal. From there the FULL signal goes to a Sony amp and the Sub out goes to the Audio Control Epicenter, then to the Rockford Fosgate amp. I custom built my SEALED sub enclosures with precision as to achieve the internal dimensions required my the 10" Alpine R series Sub Woofers...

    • @Grayback1973
      @Grayback1973  3 ปีที่แล้ว

      @@1963rockhead I love the detail you put into it👍

  • @jarotex
    @jarotex ปีที่แล้ว

    I want to leave the 4 doors on the factory amp but get signal for sub amp from the inputs on the factory amp. How would you do that? Its a 2022 GMC 2500 Denali.

  • @Wannakatana2112
    @Wannakatana2112 11 หลายเดือนก่อน

    I would be interested to see, being a visual person, exactly where you connect the speaker wires. Were they originally connected to the amp through that harness?
    Is this basically the same thing that PAC Audio makes, the harnesses?
    I just want to add an amp and subwoofer and leave everything else as-is for now until I can afford a full blown install. I just want the simplest install for this, just an interim step until I do the entire install using the PAC Audio interface.
    Someone was saying that one subwoofer output was actually noticeable better than the other which isn't logical of course. Has anyone else encountered this ?

  • @jacobschrenk6946
    @jacobschrenk6946 3 หลายเดือนก่อน

    I have 2024 silverado, does not have the brown plug on the bose amp, why is that? Still has the other 3 black plugs on it

  • @JamesWilliams-ed9ob
    @JamesWilliams-ed9ob 6 หลายเดือนก่อน

    I'm looking for full range for my 2018 Buick Regal premiere tour x

  • @tammyporter4848
    @tammyporter4848 ปีที่แล้ว

    Do you make a harness for a 2015 Chevy Silverado high country with the bose system to convert it to a Boss radio BE7ACP And everything still works steering wheel controls amp everything

  • @jaimitoleche5499
    @jaimitoleche5499 2 ปีที่แล้ว +1

    Will these plugs work with after market radios also?

  • @Charlierangel1010
    @Charlierangel1010 3 ปีที่แล้ว

    How do I get in contact with you on getting a harness made for a 17 Nissan Maxima with the Bose system. I just want to add a subwoofer and bypass the active noise canceling microphones. However I would like to maybe in the future replace the factory amplifier all together and keep my factory stereo. I’ve not had any luck finding any pin info for this particular set up anywhere online. I plan on using an audio control LOC to integrate my pioneer sub amp with. Any help would be greatly appreciated.

  • @mattrichardson8334
    @mattrichardson8334 ปีที่แล้ว

    2013 Cadillac CTS luxury

  • @PimpinKicks09
    @PimpinKicks09 ปีที่แล้ว

    I have a 17 Cadillac CTS, has bose with Navi. I tapped into the rear 6x9s and get a signal for my subs amp but that signal will not work for my 4 channel amp using a LC7i. I need your info please so you gan get me whatever i need to hook up a 4 channel amp and a mono for sub. Id like to keep all my speakers factory but im just adding 2 deaf bonce 6.5s in a box in the trunk so my highs with scream!

  • @robertsharp1294
    @robertsharp1294 3 หลายเดือนก่อน

    Good afternoon I have a 2016 Chevy traverse can you just bypass the amplifier do you make a plug and play to just unplug up and you unplug the amplifier it’s bad

  • @drgreenthumb2339
    @drgreenthumb2339 5 หลายเดือนก่อน

    Is there any harness kits available for a 2023 mazda cx5 with bose? The subwoofer is lacking and i want to ungrade it but retain the Bose mids and highs. Thanks

  • @RALPH531967
    @RALPH531967 3 ปีที่แล้ว

    I have an 08 avalanche with the Bose system is this the same kit I will be using?

  • @AlexisGomez-fl4wh
    @AlexisGomez-fl4wh 2 ปีที่แล้ว

    Hi John where can I get one of those harness for a 2020 Chevy Silverado with the 7” screen none boss speakers

  • @trentonbriones2381
    @trentonbriones2381 8 หลายเดือนก่อน

    Do the door chimes get louder?

  • @jaycee6639
    @jaycee6639 ปีที่แล้ว

    Can this harness be made to work with aftermarket headunit and retain stock options.

  • @daviancampbell3687
    @daviancampbell3687 ปีที่แล้ว

    I have a 2017 Cadillac CTS and I’m trying to use a audiocontrol LC7i hi Lo converter . Can you help me?

  • @Jcamposano72
    @Jcamposano72 ปีที่แล้ว

    Do you make em for a 2015 Sierra with bose? And are they similar to ghe one PAC makes? (pac aph-gm02)
    Lmk a price with extended speaker connections cables. Thxs.

  • @tccstucco2150
    @tccstucco2150 8 หลายเดือนก่อน

    Do you make bypass harnesses for a 2011 Nissan Maxima with a Bose amp?

  • @chrisduris2566
    @chrisduris2566 ปีที่แล้ว

    Ok I have 07 yukon denali sport with bose navigation system I am lost I tapped wires from other videos and my test light lights up at all signal wires they are sposed to he speaker so they should not all have positive output if u offer what I need to hook for only adding a subwoofer if possible I have a recoil loc already! Ty and this is first time ever messaging on TH-cam so hopefully I find your response if u have a clue what I am saying

  • @matthewcolumbie7024
    @matthewcolumbie7024 ปีที่แล้ว

    Hey John,
    I have a 2012 cadillac cts premium with navigation and Bose premium 10 speaker stereo, can you make me a harness to add a multiple channel amp

  • @jrvaldez8184
    @jrvaldez8184 8 หลายเดือนก่อน

    Hi John I'm looking for a bypass harness for 2016 gmc sierra denali 1500 crew cab with bose system. I want to run my own amp with a LC2i pro unit off that harness as well.

  • @2ndchancetrucker874
    @2ndchancetrucker874 ปีที่แล้ว

    I have a 2011 Escalade need a harness just to utilize factory speaker wires I’m doing a full install with aftermarket head unit an amplifier

    • @Grayback1973
      @Grayback1973  ปีที่แล้ว

      Email me at 1pocket73@sbcglobal.net

  • @zippytechnologies
    @zippytechnologies หลายเดือนก่อน

    I need something for 2024 camaro convertible - I am an Electronics nerd so I can probably make these too - but I do not have your experience - please send me any tips if you would share... -disabled navy vet playing with a new camaro trying to put a sub into it with some neat tricks.

  • @clintwalker4401
    @clintwalker4401 11 หลายเดือนก่อน

    What's it cost for a 2016 gmc sierra with bose n it has a center console sub. I want to add a sub n add amp to upgrade door speakers n dash tweets

  • @dennismyhre9480
    @dennismyhre9480 3 หลายเดือนก่อน

    HEY John you made of these harnesses for me a few years ago, could you please make one for my 2014 Chevy equinox, I'll be waiting to hear back from you hopefully soon, thanks.

    • @Grayback1973
      @Grayback1973  3 หลายเดือนก่อน

      Email me at 1pocket73@sbcglobal.net