[UNBOXING] JG MAC10 JG0452 Unboxing - Sniper side arm big silencer
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- Today I got to unbox the JG Mac10 that came in the £700 order. This thing is fairly quiet and performs well and particularly makes a snappy sniper side arm and its really inexpensive! Come check it out.
Ah yes my favourite sport, AIRSFT
I wanna know why they dd tht
@@willfowler8540 yes my favorite words “dd and tht”
Just ordered this one, as a cqb gun and secondary/backup
Little note on the gun having to be on safe to open the battery compartment: The gun should be put on safe for opening it up, it can damage the mechanism if you don't put it into safe when opening it up. Also I have no clue why you can open yours without putting it on safe, on mine I have to put it on safe to even open it up.
I am so happy I have found your video! I recently bought this Replica and I was not sure on how to update the FPS without a lot of hassle. Thanks for this!
Glad you found it useful! Pheas
Hi! It just arrived mine and aesthetically it is beautiful but leaves a lot to be desired in terms of functioning. Do you know any way to upgrade the trigger response? It's very sluggish u u
Thanks for the video c;
Hiya. You could put a lipo in it which will make a big big difference to the trigger but it will still be a little sluggish after that so a lot of people have made videos about installing a MOSFET in them to sharpen it up even more. Hope that helps! Pheas
@@PheasAirsoft Thanks, bro~ I really appreciate it c:
Right i know what im ordering next lol
Same here 😀
Loved the video but i was thinking you will shoot it as well
Hiya, thanks for the comment. At the moment, I don't have a suitable space to be able to show them being shot during an unboxing video. So I tend to just focus on them being unboxed, what they chrono at out of the box and generally discuss how they come from the factory. I then make sure I get them played with at some point, or film them being shot ready for a review video. Unfortunately the footage I had of this being shot wasn't any good as it was raining on the day, and I got a rain on the lense and you just couldn't see it properly so didn't edit it or release it. My friend still has this though and next time I am playing and he is there I will take it out for a game and get some footage to show it being used.
Hope that helps!
Pheas
There is a time and a place for hi caps, and this is one of them. Super small price of kit with 450 round!!!!
The TM 65 round mags are great, but if, as a sniper, things go south quickly that 65 round mag won't do a lot lol. A high would be more helpful! Pheas
@@PheasAirsoft yeah with a lipo, 65 rounds would go easily, as its a gun that you have to spray and pray with!!!
Do you know if there are Any adapters to the lipo battery available on taiwangun
Badass gun my friend. Thumbs up and support from PH.
If you can help me where'd you get that battery with the adapter
Hiya, here are links to them: www.tacticalairsoftshop.co.uk/Nuprol-50mAh-7-4V-LIPO-AEP-Battery?gclid=CjwKCAjwqJSaBhBUEiwAg5W9pwWn5mO9ocmpH-G-wsBvFnvlefpXa7QMHRKcMwk6yy4dmyh5FANurRoCGHAQAvD_BwE
and the adapter: airsoftdirect.uk.com/tokyo-marui-7-2v-battery-adapter/
Hope that helps! Pheas
Is the tm or jg better build quality wise cause I wanna HPA it
Hello! Honestly... the TM is probably better as its a little better in the gearbox, but its also significantly more money for the TM over the JG. Pheas
Hey Pheas! Hoping you can answer a question for me? I just got a JG Mac10 and a few AEP lipos.. but how do you charge the lipos?? I have an ASG lipo charger but the AEP batteries only have the balance connector? TIA 😊
Hello! I gave up on the harness thing to charge them, I just bought a charger that only needs to use the balance connector to charge. Made life SOO much easier and simpler. Something like this one: www.componentshop.co.uk/1000ma-1500ma-li-po-li-fe-charger-for-2s-3s-lipo-life-battery-packs-complete-with-psu.html You just plug in the white balance connector and thats is, no messing with silly connectors and things.
Hope that helps!
Pheas
very nice gun
Friggin America, I think we get the orange plastic tip, I’ll find out when it comes I guess, I’ll be bummed if it doesn’t have that second capped off thread. Kinda doubt it will
Did it end uo having it?
@@MiguelRodriguez-ob4pg not sure actually, I may get this thing still but I ended up getting the kwc uzi. That thing in fact does.
@@vicrattlehead8665 I might be picking it up tomorrow and I'll let you know.
A CounterStrike gun! Also can u do an unboxing on the m4 colt again ; 3
linkz (it's really not a big price) : www.taiwangun.com/fr/electrique/cm-506-cyma
@@LLLexen I've done this one already if you have a look through my unboxing videos! Great piece of kit!
its basically the M4A4 from cs:go :3
@@PheasAirsoft yea i do know u already did, but i hov a question: where can you get the nice and textured grip rail covers?[im in europe just so u know]
@@PheasAirsoft And i know right! I didn't get it YET, but 70€ will not disappoint me. But even tho it is not licensed(and shit like that), u can really get the nice semi and auto mode on the electric gun?(cuz i found a spring powered version of it)
Hi could you put a link where you bought gun, battery and battery adapter please. Ty
Of course I Will:
Gun: www.taiwangun.com/en/electric-3/jg0452-j-g-works?from=listing&campaign-id=19
Battery: www.taiwangun.com/en/batteries-li-po/aep-battery-li-po-680mah-7-4v-20c-micro-ipower?from=listing&campaign-id=19
Adapter:
www.airsoftworld.net/new-tokyo-marui-micro-aep-to-mp7-skorpion-mac10-battery-adaptor-li-po-lipo-7-4v-550mah.html
Hope that helps!
Hey I know this comment is super late, but I was wondering what battery & charger you used for the adapter on the Mac-10. I don’t know the size that the adapter fits, so knowing the battery you use would help. Also, is the Titan charger a good charger, or is there a better one?
Hello! The battery are "aep lipos" available from a few companies (here is a link to one: www.airsoftworld.net/world-exclusive-lithium-polymer-aep-battery-li-po-lipo-7-4v-550mah.html) Then it it put into an adapter to make it fit into the bigger size needed by the mac10 (here is a link: www.airsoftworld.net/new-tokyo-marui-micro-aep-to-smg-7-skorpion-mac10-battery-adaptor-for-li-po-lipo-7-4v-550mah.html) As for the charger I use a charger like this: www.componentshop.co.uk/800ma-charger-for-2s-or-3s-7-4-11-1v-battery-packs-complete-with-mains-power-supply.html where all you do is plug in the little white connector of the lipo and the charger does the rest, no messing or faffing! Hope that helps! Pheas
Alright mate. I bought that exact lipo adaptor and it worked fine. However the lipo battery terminals broke off when I attempted to remove the battery to charge it. Do you leave your lipo battery in the adaptor the whole time and simply charge it with the white connector. Is that how you charge yours?
Hello! I always charge mine via the white connector, but I have 3 lipos and always swap them in and out of the adapter on a game day. I did have a similar issue, the battery was almost brand new, the retailer accepted it back (the lipo) and replaced it for me. Pheas
I'm looking to get a cheap Mac 10 to polerstar because I don't want to pat 500 for a sub 5
Hello why i need another battery and changer ? Im new here i order a classic one without extra equipments, so what i need to extra order ?
Do the TM low/mid caps fit the JG Mac 10?
Hiya! They do indeed fit and feed! Pheas
@@PheasAirsoft wow ok, thats cool, thought they woudt work because the top looks different
@@PheasAirsoftany chance you know if the internals are an almost match to the tm internals? I'm looking to put the bingo airsoft hpa kit into it. Didn't want to hash out the funds for the marui model just to gut it.
does it come with the black tip or orange tip? If it comes in orange tip, is there any black tips to replace the orange tip?
Hello! The orange tip is on the US versions and not in all states. So if you are in the US and in a state that requires them, then it will come with one on, Otherwise it will be black. Pheas
can you please help i have to battery that comes with the gun..i put it in properly but the cover wont close properly aswell
Hiya! There is a bit of a knack to doing it. Make sure it is in the right orientation first (which it looks lke you have done) and then there is a sweet sport where the cap will go in, but might need a touch of pressure and then push the bar in to lock it all down. Pheas
Hi bro! I know im late but this charger is out of stock .. do you know where i could find the same or something équivalent to charge my 600mah 7.2v lipo? Or how could i recognize the charger that can charge a single plug like you said ? I dont see any difference from the charger that can only charge with the 2 plugs… Thanks in advance!!!
Hello! where abouts in the world are you and I will see if I can find you a link. Pheas
@@PheasAirsoft Switzerland, Europe
@@globoy2844 www.taiwangun.com/battery-chargers/compact-lipo-charger-b3pro-8fields something like this, that is a lipo charger, BUT only needs the tiny little white connector to be connected up. You can also get USB ones too (taiwan gun has one) Pheas
What is the barrel specifics? I’d like to put a tracer unit on but can’t find the barrel specifics anywhere
Hiya. The outer barrel that takes the big suprressor on it has the big threads (I think they are like 22mm or something similar) but also has a screw off cap as well that exposes some 14mm negative (the normal ones) thread for normal accessories to be attached. Hope that helps. Pheas
Hey man I’ve just got this gun, charged the battery up but the rate of fire is tragic? I can shoot a handgun faster than the Mac 10 on full auto! Any idea what’s wrong? It’s brand new
Hiya, if you are using the battery from the box, then it's the battery at fault, it's very poor quality, it may get better after a few charge and discharge cycles, but I can't recommend enough getting an aep lipo and the adapter for it. For example this lipo www.airsoftworld.net/world-exclusive-lithium-polymer-aep-battery-li-po-lipo-7-4v-550mah.html and this adapter www.airsoftworld.net/new-tokyo-marui-micro-aep-to-mp7-skorpion-mac10-battery-adaptor-li-po-lipo-7-4v-550mah.html this would sort your issues our in no time. But first charge the battery then drain it and recharge it again a few times over and you should see a bit of improvement. I hope that helps.
Hi mate, I’m a year late, but do you know what magazines this gun uses and what volt battery would be best for this gun in regards to fps/rpm.
Hiya! They are great little pieces of kit. They use their own mags, but Tokyo Marui (expensive) and JG (cheaper but high caps only) both fit and feed in this. As for the battery I would get some of the 7.4v aep lipos and the adapter that Tokyo Marui make for this and use those. They will be much better than the standard nihm batteries that are included. The only way to adjust the fps of the gun is to mess about with the internals and the air seal in there. You could possibly get a slight increase by changing the inner barrel and hop rubber. Hope they helps. Pheas
When your charging the battery dose it turn red to indicate it's still charging?
Hello, I havent used the included charger before, I usually cut the wire, add a tamiya connection and use it on my normal charger, but I think the red is on regardless of charged or not. Pheas
How long does battery last? And do you think there are any upgrades that are needed in this?
Hiya, the inluded battery would probably get you couple of high caps of use and then be gone, so you could need a couple of them. A lipo would go a little further but you would get better rate of fire and better trigger response. I would look to bed in the hop rubber first (couple of mags through it) as it will be inconsistent at first, but after that it will be great. Longer term.... a tight bore and a top range hop rubber and you will be golden! Hope that helps. Pheas
Thank you! 😀
Just got this, is there anyway for me to raise the rps
Hello! Eagle 6 in the UK do an upgrade spring for it. Visit here: eagle6.co.uk/shop/all-parts-by-model/info-tokyo-marui-electric-compact-machine-gun-series.html and have a look. Pheas
Can you sen me a link for where I can get the battery?
Hello, this is one of the batteries I have, www.airsoftworld.net/world-exclusive-lithium-polymer-aep-battery-li-po-lipo-7-4v-550mah.html the same website does the adapter. Pheas
Do you have link to buy the battery you recommended to use ?
Hiya. Yep here is a link to the battery. www.taiwangun.com/en/batteries-li-po/aep-battery-li-po-680mah-7-4v-20c-micro-ipower
And here is a link to the adapter the battery sits in to work in the mac10 and scorpion and mp7
www.airsoftworld.net/new-tokyo-marui-micro-aep-to-mp7-skorpion-mac10-battery-adaptor-li-po-lipo-7-4v-550mah.html
Hope that helps.
Pheas
Just got this gun and I’m wondering if you can charge a 7.4 v lipo with the adapter with the included charger?
Hello! You cannot charge a lipo with that included charger. It needs to be balance charger to charge it up. Hope that helps. Pheas
@@PheasAirsoftThanks
@@PheasAirsoft Btw what charger do you recommend for a starter?
@@bobi2674 for a starter one, to get going, I would use something like this: www.componentshop.co.uk/800ma-charger-for-2s-or-3s-7-4-11-1v-battery-packs-complete-with-mains-power-supply.html with this one, you can just plug the little white connector on the lipo into the charger and thats it, it will charge and balance. Otherwise other chargers require both the little white connector and the main power connection wiring up (needing additional things) to charge and balance. Hope that helps.Pheas
@@PheasAirsoft Thank you. It really does help😀
Is the jg just like the tm mac 10
Hiya, yes it is! Virtually identical! Pheas
could I get a Link for the Lipo battery and adapter?
Hiya. Here is the link to the adapter: www.airsoftworld.net/new-tokyo-marui-micro-aep-to-smg-7-skorpion-mac10-battery-adaptor-for-li-po-lipo-7-4v-550mah.html and here is a link to an example of the lipo as well: www.airsoftworld.net/world-exclusive-lithium-polymer-aep-battery-li-po-lipo-7-4v-550mah.html Hope that helps Pheas
How much does it weigh in pounds ? Without the mock suppressor
Hiya. It's about 3 pounds in Weigh. Hope that helps. Pheas
@@PheasAirsoft thanks one more question how long does it take for the included battery to charge?
@@DatBoulTyy the included battery maybe like an hour or two at the most to charge I would have though. Pheas
Can it work with out the loop adaptor
Hello! by loop adapter do you mean the bit on the front (behind the muzzle) that just keeps swining about? If so then yes, you can remove it and its totally fine! pheas
@@PheasAirsoft battery adapter
@@cqb_7075 ah right. The battery adapter, it will work if you use the included battery adapter, but won't be any where as good at working. The rate of fire will be slower
Does anyone know we’re I would purchase one ? Plz help
Hello! What country are you in?
Pheas
@Pheas Airsoft, I’m in the us
@@chill_zayo_o9448 Evike do them, but they are out of stock. Taiwan Gun sell and ship to the US too with little or no import charges so you could get one from there. Pheas
These are all out of stock in the us suddenly
Proving to be very popular at the moment! Pheas
Can Taiwan gun two tone?
Its not something they offer yet, which is a shame as they could do really well if they did do it! Gun fire offer two tone services though. Pheas
310 FPS on AEP? OUT OF THE BOX? WHAT SORCERY IS THIS?
I don't know, but I hope they do more of it!
Ooh thats pretty nice perfect hopefully they'll make a g2 with metal gears and 375 fps
Brillainet informative series of videos mate! Subscribed. Do you havea link to the LiPo adaptor please?
PS: Where did you get this JG from please?
And read the posys re adaptor, doh! Got too excited.
Thank you so much for the amazing feedback, always great to hear nice things, but important to hear criticism so I know how to improve. The JG I got it from Taiwan gun, www.taiwangun.com/en/submachine-guns/0,j-g-works it's currently out of stock at the moment though so doesn't show up. But great retailer, it's where I get a lot of my stuff from.
Do you think this would go good with a shotgun?
If you run a shot gun this would make a good side piece to run along side it. It means you have the full auto sneaky option as well as the shot gun blasting options. Gives you the best of everything (apart from sniping) Pheas
@@PheasAirsoft Ok thanks. One last question is this only full auto or is it also semi?
@@applebeestacos4840 it has both, there is a selector just in front of the trigger guard to select which firing mode you want. If you do get it make sure to get the lipo and lipo adapter as it's sooo much better for it.
Pheas
@@PheasAirsoft Nice
Is it full metal ?
Hi, thanks for the question. Its mostly plastic on the outside, like the TM one. It is very solid though and sturdy!
Price
Hiya. It depends on where you get them from. Inside the UK they are between £80 and £100 but in the EU you can get them for around £70 to £80
can someone link this gun
I can't seem to find it in stock anywhere but here is a link. www.actionhobbies.co.uk/JG-MAC10-Airsoft-Submachine-Gun_A19EG0.aspx#.XeP93h7LdEE hope it helps
Us price?
Hiya, they are currently out of stock on Evike, but their price is $99.00
Here is a link www.evike.com/products/45368/
Pheas
I think that mac 10 is cheaper version of uzi
Hi, thanks for the comment. Although it is cheaper than a TM Uzi (Well does a clone, but has very mixed reviews. ) it gets used in a very different way. Because of the big-ass suppressor on the front a few of my friends who like to snipe run it as their back up as it allows them to stay quiet but can defend themselves at close range. The Uzi can certainly be used the same way, its just not as quiet, and people just seem to prefer the mac 10 to the UZI, plus the Mac10 seems to be easier to find.
I thought to buy a new Mac 10, but before that I thought to see how it works but you didn't show it. I didn't care for that but you wasted my time by making the video so long (13:44) because of your talking about the gun😠😠😠😠😠
I am sorry that you feel that way. I am still developing my channel and how I do things and at the time I didn't have a location to take it somewhere to shoot to show it in action as part of the unboxing. I have got somwhere now but can't use it until after the lock down has ended in the UK. The detailers covered in the video are things that people have asked me to comment on and show. I do appreciate that you did watch the video though. Pheas
Is there a need for this comment? The video was very informative and told me everything I needed to know so much so I have even since bought the exact same AEG. Comments like this make TH-cam way too toxic.