Hi Fronius Team, I am using Fronius Load Mgmt and it is great, but I am missing one setting in the software: It is not possible to trigger a digital output based on battery state of charge. I would need an IO to be switched on when SOC is below 20% and switch off again when SOC is above 40% to start and stop a generator. Could this be added to the firmware ?
Visualisation via Smart Meter - I have a Smart Meter and can't see this - as the owner, I would like to be able to control our battery - put in off peak from grid to use during Peak hours. How do I do that? Do you need a certain Smart Meter or can only the Installer see all what you show?
Hi Helen E.! You have to connect to the web-interface of the inverter and log in with the technician user, then you have full access to all the settings, which you see in the video. Best regards, your Fronius Social Media Team
Can it trigger a smart 12v relay like a Shelly 1 plus wifi relay switch as that could trigger the smart switch side and turn on wifi devices like AC, heat pumps etc... that don't have 12v trigger and nothing in Australia that's not Industrial size does.
When will you added remote self management? Eg turn on/off battery charging during low PV and low cost grid. Instead of having to be on-site and press button and connect to inverter wifi
Hi AusGuy! There are some options to get remote access to the inverter, but we do not offer this function directly, because of safety reasons. Best regards, your Fronius Social Media Team
Hi Fronius Team, I am using Fronius Load Mgmt and it is great, but I am missing one setting in the software: It is not possible to trigger a digital output based on battery state of charge. I would need an IO to be switched on when SOC is below 20% and switch off again when SOC is above 40% to start and stop a generator. Could this be added to the firmware ?
Visualisation via Smart Meter - I have a Smart Meter and can't see this - as the owner, I would like to be able to control our battery - put in off peak from grid to use during Peak hours. How do I do that? Do you need a certain Smart Meter or can only the Installer see all what you show?
Hi Helen E.!
You have to connect to the web-interface of the inverter and log in with the technician user, then you have full access to all the settings, which you see in the video.
Best regards, your Fronius Social Media Team
Thanks. Have a also time function for IOs? If i need to turn on at one time and turn off on another time..
Can it trigger a smart 12v relay like a Shelly 1 plus wifi relay switch as that could trigger the smart switch side and turn on wifi devices like AC, heat pumps etc... that don't have 12v trigger and nothing in Australia that's not Industrial size does.
When will you added remote self management? Eg turn on/off battery charging during low PV and low cost grid.
Instead of having to be on-site and press button and connect to inverter wifi
Hi AusGuy!
There are some options to get remote access to the inverter, but we do not offer this function directly, because of safety reasons.
Best regards, your Fronius Social Media Team