"Connect to the right there ..." 😮💨😮💨😮💨 How about a detail or two more please? 🤔🤔🤔 Connect the red clamp to the WHAT battery post? Positive? Negative? Thanks in advance!
Is the battery is really low like at 1 1. 9 1 2.0 do I leave it in there longer because the car still don't turn on. Onky after i keave for linger period
Nice Video. Reminder/Correction: Next time place the ground clip on any engine metal bracket, housing. Not the body, unless there's a label that instructs you to. When disconnecting, unhook positive Clip FIRST.
How to be a complete moron & try to make a YT video about jumping a car: Step 1: “Make sure the car is turned off.” 🤣🤣🤣 You are the reason mechanics and people like me (FF/Paramedic) will ALWAYS have job security! I hope you learned more than you taught anyone from this video. 👏💪👍
But why put the black clamp somewhere else?…I had to use one of these and my father told me to attach both clamps to the battery and he told me to leave it on charging for 5minutes….which I guess my car ended up working fine all day 🤷🏻♀️🤷🏻♀️
Hi Debbie I am glad you asked.Good to be asking. I was looking at the instructions on the jumper. I jumped batteries between 2 cars before and was a similar setup. I just looked up this info Connect the other end of the negative cable. Be sure that it’s attached to an unpainted metal surface on the engine of the dead car. This could be an unpainted bolt or bracket that is as far from the dead battery as possible. Doing this provides a solid ground and reduces the possibility of igniting the hydrogen gas emitted by the car battery.
I just bought this and plugged it in to charge for 40hrs first time, and after about half hour there are 4 solid bars showing and 13.1v. Should I still leave it plugged?
40 hrs is more than enough. mine shows 3 lights red orange green. You might have a newer model they say to have it charged once a month. Battery slowly depletes maybe 10 percent a month. At 90 percent is still usable
The negative can go on the negative terminal why would you have to clamp it to the body of the car doesn’t matter doesn’t matter I have never done that don’t know anybody has
okay traditional jumps you should since there’s like an external spark from one car battery to another. where as this portable battery creates a safe internal spark allowing you to attach the negative directly for more efficient jumps
Good to be asking. I was looking at the instructions on the jumper. I jumped batteries between 2 cars before and was a similar setup. I just looked up this info Connect the other end of the negative cable. Be sure that it’s attached to an unpainted metal surface on the engine of the dead car. This could be an unpainted bolt or bracket that is as far from the dead battery as possible. Doing this provides a solid ground and reduces the possibility of igniting the hydrogen gas emitted by the car battery.
"Connect to the right there ..." 😮💨😮💨😮💨 How about a detail or two more please? 🤔🤔🤔 Connect the red clamp to the WHAT battery post? Positive? Negative? Thanks in advance!
EXACTLY!!! That's what I was trying to figure out. Important detail to leave out.
Red to red. Red to positive.
Yeah he’s a moron and doesn’t really know the concept he just memorized how to do it
It’s positive to positive
You serious? I don’t think you have any business being under the hood🤦♂️
Got myself up and running thanks to your video. Thanks so much!
You're welcome. Glad to help
Make sure car is off….lol check! Thanks for the short quick video.
Thanks for the like😁
Clear, simple and easy ... thank you guys!!! Good job
This was very helpful thank you lol
I feel quite happy with myself, I started a car all by myself. Am I an adult now, lol. But seriously amazing quick video
Thanks! We all like quick video 😁
Is the battery is really low like at 1 1. 9 1 2.0 do I leave it in there longer because the car still don't turn on. Onky after i keave for linger period
Nice Video.
Reminder/Correction: Next time place the ground clip on any engine metal bracket, housing. Not the body, unless there's a label that instructs you to.
When disconnecting, unhook positive Clip FIRST.
Thank you. It did say a bolt on the body in the booklet. But I will try engine metal bracket next time as the bolt is small on some cars.
What is an engine metal? Sorry.
@@JenMariApa "Engine Metal Bracket"...Any unpainted Metal object around the Engine.
@@cadwerks3277 thank you.
Always disconnect the black one first. If you don't know don't give bad advice to others!
Sad video as most guys know what your talking about but you need to explain the polarity of cables and the battery during attachments 🙂
How to be a complete moron & try to make a YT video about jumping a car:
Step 1: “Make sure the car is turned off.” 🤣🤣🤣 You are the reason mechanics and people like me (FF/Paramedic) will ALWAYS have job security! I hope you learned more than you taught anyone from this video. 👏💪👍
I immediately corrected myself when I said car but I meant jumper is off. Anyways, one shot video 😁. Thanks for the comment
But why put the black clamp somewhere else?…I had to use one of these and my father told me to attach both clamps to the battery and he told me to leave it on charging for 5minutes….which I guess my car ended up working fine all day 🤷🏻♀️🤷🏻♀️
Hi Debbie I am glad you asked.Good to be asking. I was looking at the instructions on the jumper. I jumped batteries between 2 cars before and was a similar setup. I just looked up this info
Connect the other end of the negative cable.
Be sure that it’s attached to an unpainted metal surface on the engine of the dead car. This could be an unpainted bolt or bracket that is as far from the dead battery as possible. Doing this provides a solid ground and reduces the possibility of igniting the hydrogen gas emitted by the car battery.
Thank you
Welcome!
I just bought this and plugged it in to charge for 40hrs first time, and after about half hour there are 4 solid bars showing and 13.1v. Should I still leave it plugged?
40 hrs is more than enough. mine shows 3 lights red orange green. You might have a newer model they say to have it charged once a month. Battery slowly depletes maybe 10 percent a month. At 90 percent is still usable
no it is way overfull now. unplug it immediately 😟
How long does this stay charged.
Thank you!
does this work with every car?
It should
no it only works on 4 cyl or smaller
How do you recharge this jump starter. I used it only only once, and now it won't recharge no matter how long I leave it plugged in.
typically it takes like a day or 2 to charge up fully.
Car battery memory fried 😆
Hoho(!) that guy thought he meant reverse!
The negative can go on the negative terminal why would you have to clamp it to the body of the car doesn’t matter doesn’t matter I have never done that don’t know anybody has
Yeah that was new to me as well, can anyone explain the reasoning behind not clamping negative to negative?
@@jaysantoyo6215 I've always been told to clamp the negative to the metal of the car as a ground
Because it can creat sparks and if you have any acid leaks it will start a fire
okay traditional jumps you should since there’s like an external spark from one car battery to another. where as this portable battery creates a safe internal spark allowing you to attach the negative directly for more efficient jumps
Good to be asking. I was looking at the instructions on the jumper. I jumped batteries between 2 cars before and was a similar setup. I just looked up this info
Connect the other end of the negative cable.
Be sure that it’s attached to an unpainted metal surface on the engine of the dead car. This could be an unpainted bolt or bracket that is as far from the dead battery as possible. Doing this provides a solid ground and reduces the possibility of igniting the hydrogen gas emitted by the car battery.
Dude gave bobs burger directions
We have a bmw that’s been sitting for about a year now. I tried jumping it with my accord but it didn’t work.
Do you think one of these help?
why did you let it sit for a whole year??!!!
What is connect to there
Video would have been better if I could see it more clealy; Screen too small.
I thought it was red on red and black on black
How to make a TH-cam video demonstrating how to do a thing. Make sure nothing vital to the instructions gets into frame.
Now my question is HOW DE fook do I turn off the jump starter 💀💀💀
once the car starts you turn it off
@@hanamichisakuragi423 noooo how do I turn off the Jump starter 💀 there’s no button for that 🤣
@@brennantria1200 just leave it. I know, it's annoying.
“Connect the red to here” (closed vid)
What?????
Thank you