In this Video a friend of mine replace the Front Shocks on his 2000 C5 Corvette. Another Video on the replacing the Low Beam Headlight Bulbs will be coming soon!
hey Scott what is a skock bracket at 7:47? :)........and OMG at 10:58 did I really do that I must have been tired pull the jack stand out before I put the tire back on? ..........anyways good video considering the camera and audio issues we had
Better then using a crescent wrench use a 1/4 open end wrench or perhaps a 6mm open end wrench. My crescent wrench got stuck on the shock and was a bitch to get off. And don't forget to use the new rubber bushings from the new ZO6 shocks as they are longer and need to be used to get the nut to tighten properly on the top of the front shocks.
Having the right tools will definitely make a job like this a lot easier
I picked up a 98 vert a month ago and it needs new front shocks. Looks like a pain, much easier to do on my 92.
hey Scott what is a skock bracket at 7:47? :)........and OMG at 10:58 did I really do that I must have been tired pull the jack stand out before I put the tire back on? ..........anyways good video considering the camera and audio issues we had
I am getting ready to put ZO6 shocks on my 2001 C5. What are the lbs of torque on the upper and low bolts.
19 lb FT for the top nut and 21 lb Ft for the lower bolts. Thank you for your service. I was AF also.
@@edbard3766 thank you for your service as well.
Would this work on a c6 Corvette? (Mine is a base c6 corvette, I'm just gonna change my driver's side front shock)
There are special Sockets for the clutch head on the top of the shock shaft. ask your tool guys about them.
www.napaonline.com/en/p/BK_7769240?cid=paidsearch_shopping_dcoe_google&gclid=Cj0KCQjwwr32BRD4ARIsAAJNf_0n8mwbi6swhazZ5hjWxUyzpDMpwzg4cLth6SZtKKPOgreDUH7BJKAaAiBWEALw_wcB
Better then using a crescent wrench use a 1/4 open end wrench or perhaps a 6mm open end wrench. My crescent wrench got stuck on the shock and was a bitch to get off. And don't forget to use the new rubber bushings from the new ZO6 shocks as they are longer and need to be used to get the nut to tighten properly on the top of the front shocks.
Never put vise grips on the cylinder !!!! You will damage the shock ...
kinda scary no jack stand
Would have been easier if you would have dropped the upper control arm and her the shock drop down out of the way. 🤷🏼♂️
Video is a joke, someone will get hurt .
You sound scared. But I agree.