FPV Combat - Tutorial 1: Wiring diagram
ฝัง
- เผยแพร่เมื่อ 24 มิ.ย. 2021
- In this video I'm gonna show you in detail the different possibilities when talking about the wiring diagram.
Find out more on official website:
www.fpv-combat.com
Buy it here:
www.fpv-combat.com/dealers/
Documentation:
www.fpv-combat.com/downloads/
Facebook page:
/ fpv-combat-84700763231...
Facebook community group:
/ 2441262976051510
RCGroups disscussion:
www.rcgroups.com/forums/showt... - วิทยาศาสตร์และเทคโนโลยี
![ช่วยพาฉันผ่านเวลา - วสันต์17 [Official MV]](http://i.ytimg.com/vi/HFnntWoqc54/mqdefault.jpg)
Thanks for the tutorial Matteo! 👍
That's soooo cool thanks for sharing 👍😁
The video shows connecting the VTX and camera directly to the combat board. but the latest manual says specifically to NOT use the power pads on the combat board to power the VTX or the Camera.
it is very disappointing that the board's power pads cannot be used as that significantly complicates wiring, and if they can't be used they should be removed from the board.
Super fun! Thanks for the great video. Can you list out the different air frames that were in the video pls. Thanks
Thank you for the “great” feedback!
Do you mean the foamies planes?
They are all home built from 6mm foamboard (similar to depron).
You can find the plans on the Facebook page or for free on internet.
We tested F18, Eurofighter, Mig-29, Su-35 and F22 (different structure, a little bit heavier).
This year we also flew some home built ME-163 vs FW190 (from Hobbyking) different flying characteristics but amazing fun!
Will there be a video "Wiring diagram for digital FPV Combat"?
How do you connect multiple servos? For example, independent elevon servos on a wing? Also, can you connect the ESC and servos in case you want to switch modes or is it one or the other?
You can connect only one channel to be manipulated. That is definitely more than enough to “feel” the hits!
How would I go about forwarding the pwm signal from a flight controller?
Hello, there are several videos explaining that, however both painless and Joshua Bardwell have a couple of dedicated videos:
th-cam.com/video/N69128cOFPc/w-d-xo.html
th-cam.com/video/jiD6aC0l1VQ/w-d-xo.html
PS: it seems you commented twice but I can’t find the first one…
@@fpvcombat thank you! Can't wait to get it up and running! All the guys in the area are waiting to try it on the drones. Yeah I watched your video a couple more times and answered my original question. Haha.
How can you connect the system to an existing drone with a flight controller? What about a whoop? You are mentioning a whoop on your webpage. If the system plays the role of the flight controller then how to change the flight characteristics?
The system is NOT a flight controller.
FPV Combat board is dedicated only to fighting functions as dedicated OSD (integrated in the main board).
To use it on drones you simply have to configure the FC in order to forward one channel from the TX to a physical pin as “PWM servo output” to be able to trigger the shots!
For whoops you can check the micro version which weight only 1.5g and is small enough to fit in such models being only 20x15mm!
Join our party later on today, we can talk directly about what you want to know!
@@fpvcombat can the flight controller OSD be overlapped with the FPV Combat's OSD?
Yes, you van, Dep ėdi h nu tie orderį you will have different layer/visibility priority!
What software was used to generate this wiring diagram
As simple as paint.net and a lot of refining…