[en] Repscrap. DIY 3d printer from old printers and scanners.
ฝัง
- เผยแพร่เมื่อ 25 ธ.ค. 2017
- This video is about a DIY 3D printer that I've made from a few old inkjet printers and one scanner.
Part's list:
github.com/electronPath/Repsc...
Music from here: archive.org/details/TryAgain_715
#RepStrap #RepScrap #3Dprinter - วิทยาศาสตร์และเทคโนโลยี
![จังหวะนี้ - เม้ก อภิสิทธิ์ [ Official MV ] จอนนี่มิวสิค](http://i.ytimg.com/vi/4gQRZCkRyiU/mqdefault.jpg)
This is super cool! I've always loved seeing people make printers using non-printed components, and this is no exception. Well done!
Thanks!
Well done building your own 3d printer. There aren't many people out there who could pull this off. Most wouldn't even look at videos like this, others want printers fully assembled, some are like me who just want to get something they can put together for their first printer because they are impatient.. and then there are awesome people like you who have pioneered this technology.
Looks good! Nice use of old printers and scanner. We just got the parts in and all the old scanners and printers. This video is a good reference and encouraging.
Very clever use of old printer.
This is awesome! Would love to see how you build it! Also, would love to see how you programmed it!
Thank you! Unfortunately I can't show you how I built it right now. It was almost 4 years ago and since then I printed plastic parts on that printer and build a Prusa MK2.5 printer clone th-cam.com/video/MzduN3RbeYI/w-d-xo.html.
I had no space for two 3d printers and had to disassemble this one. This machine is significantly slower than my Prusa clone but was fun to built.
Programming was not hard at all and well documented. I used marlin firmware marlinfw.org/
Basically I just changed a few lines in the firmware (which pins I've used for endstops, termistors etc.) and that's it.
I love to see recycled parts given a second life, building your Repscrap must have been so much fun!
+1 Subscription
Thank you very much :)
Great idea and great jobs, congratulations
Hi, thank you so much. Please make video on how to make it step by step. I love the idea of reusing the scraps out of faulty printers and scanners. It'd help us and the environment. 🌹🌹🌹
Amazing job ,just awesome thumbs up
Dont know if anyone gives a shit but if you guys are stoned like me during the covid times then you can stream pretty much all the new series on instaflixxer. I've been streaming with my girlfriend these days =)
@Malcolm Raphael Yea, I have been watching on InstaFlixxer for months myself :D
Great work!
Thanks for the friendly warning. Hope to see more.
Thank you very much! There will be a new project in a few months, this time it will be DIY CNC.
Super cool stuff !
Thank you!
Just found printer-scanner combo from trash and gonna build 3D-printer from it.
Very cool build.
Thank you :)
Great job!
Thanks!
Excelente trabajo u muy buena idea,,, saludos
Gracias!
Great Job!!
Thanks!
Hey man, i love your project and I have three old printers laying around can I convert all three of them into 3d printers or do i need two to make one of these gorgeous machines
Hi, thank you! Probably you will need all three printers to make one 3d printer. Some parts will be good, and some won't be suitable for this application. For example, the motors from old printers could be rated for 24 or 36 volts and could overheat if running from a 12 volt control board. Or you could run those motors from a 12 volt control board and limit the current on the driver but the torque of the motor will be small.
It all depends on what parts are inside of those printers.
Hi, how did you attached the strepper motors tot the threaded Rods?
He didn't even reply he just liked you comment🤭
@@monkeh3612 It's a youtube thing. I did reply to that comment but later I switched my email and all my previous comments got deleted.
Блин единственный билд "как надо" на всем ютубе, из хлама , так же хочу сделать (у меня лет 10 лежат в подвале штук 8 epson ов 6 цветных разных годов и сканер 99 года там вместо ремня трос стальной) а ты не пробовал вешать фрезу на него вместо экструдера ???
@@electronpath точно , только заметил ,но в целом эта конструкция выглядит гораздо серьёзнее других поделок такого плана, в тех эпсонах что у меня там толстая стальная направляющая и вставки латунные в каретке я их все или по частям использую , и в сканер вторую поставлю , а эти движки по Z у тебя параллельно к 1 драйверу подключены ? Вместо концевиков хочу оптические использовать датчики потому что их со всего этого хлама наберется целая гора а концевики надо покупать , движки квадратные хочу попробовать они вроде лучше круглых и их я уже наковырял от туда штук 6 , жду праздников новогодних когда время на все это появится ))
@@electronpath спасибо , учту , у меня такие же как у тебя на экструдере только короче шесть штук они от эпсонов 2000х годов и много круглых как на z но я их не хочу использовать их все ругают а те квадратные они тож 24 вольта
@@electronpath ну это однозначно на безрыбте и рак рыба , но главное, что все это- халява :)
Well, that was helpful. 🙄
@@madzak9847 Появилось время?
"Лет ми спик фром май харт" (с)
Hello I am trying to make a 3d printer Arduino codes as a link can you throw the bide screen I did not use the bide screen I could not afford it so I use repetier what are you using I would be very happy if you help I have quite a lot of problems and my English sucks
Hello, I used Repetier at first. Could be problematic if the PC crashes then the print crashes too. I would still recommend getting a display even smaller one.
@@electronpath So can you throw away the link to the Arduino code?
Most of the process is quite simple:
For Repetier you have to flash their firmware to Arduino:
www.repetier.com/documentation/repetier-firmware/
And then install Repetier Host on your PC:
www.repetier.com/
First start and configuration described in their documentation:
www.repetier.com/documentation/repetier-host/rh-installation-and-configuration/
@@electronpathHello, I wonder if you would recommend 8mm threaded rods (Tij) are efficient?
Print on PLA, not ABS. PLA is easy to print and more cheap.
Easier to print - yes.
Cheaper - definitely not. In my country ABS is almost two times cheaper than PLA.
can you please help me i also are building this jus need sum help
Hi, no problem. But expect to wait a bit for a response.
Плохой английский
Що є то є😂