@@gagan-tb2pp If you are asking about the undertail/fender eliminator/integrated tail light combo then no. The tail light for the undertail setup is made specifically to fit in that setup.
What is the size on the screw that you used during install to hold the brake light to the bike? Mine didn’t seem to come with any, but I’m not certain that it was actually supposed to
Installed mine but the signals don't blink yellow at all it pops on for a second then nothing after that. Break light works just fine when I grab the break. Did I get a defective one?
It's pretty simple. The four position connector that carries the brown and green wire on our subharness has two open positions for ground and +12 switched by ignition key. The terminals in these MTW110 plugs are pretty easy to remove and swap. When you remove your stock fender lighting connector, get a pin or tiny flathead screwdriver, and unlock the stock license plate light wires out of their connector and move them to the open positions on the subharness plug from the new light.
Email our Support Team and they should be able to help you out! There's a good chance it's a loose connection but they will take you through the troubleshooting process. Support@TSTIndustries.com
No, this is because the tail light is in a mode that does that. You can press the program button to change the light patterns. Here is a video we made about the program button and light function: th-cam.com/video/o-XEvWhVNho/w-d-xo.htmlsi=S_x6zrW2XU8llvlQ -BR
thank you very much! Bought the bike and was given what I'm guessing was a cheap ebay light, got the signals to flash but brake light remains lit up, tried switching wires on hand brake switch and adjusting foot brake switch. Just purchased this light this morning!
This is technically possible but will not be plug and play. The signal leads from the tail light will have to be spliced in to the positive signal leads that go to the low profile signals
The best place to get help with your TST parts is our support department accessible through our website. Typically we hear about this symptom when the rear brake switch on the bike is not adjusted properly and it holds the brake light on by default. That way when you press the brake it doesn't get brighter because it is in brake mode already. Please check your rear brake switch and if that doesn't help you please contact our support department.
No, this means your rear brake switch is either disconnected, or adjusted too hard. Check out this video for more info. th-cam.com/video/3HWdVUyDVXQ/w-d-xo.html
Whoever you are that filmed, edited, and taught in this... you are great. Easy to understand and very helpful. Thanks TST
Wow, thanks!
I have had my grom 2020 for 2 days and already looking at upgrades
You should check out our undertail/taillight combo instead of this tail light here.
I don’t even have a grom and I’m already looking for parts
Btw I bought a grom and I have one now. 2018 🎉
@@TSTindustries will this light work with that combo?
@@gagan-tb2pp If you are asking about the undertail/fender eliminator/integrated tail light combo then no. The tail light for the undertail setup is made specifically to fit in that setup.
Does anybody happen to know which wires to tap the license plate light into?
My turn signals arent working but brake is. Ideas?
What is the size on the screw that you used during install to hold the brake light to the bike? Mine didn’t seem to come with any, but I’m not certain that it was actually supposed to
It was supposed to come with two screws. I just ordered one and mine did. I'm sure if you call customer service they might help you out with that.
You figure out thr screw size?
Installed mine but the signals don't blink yellow at all it pops on for a second then nothing after that. Break light works just fine when I grab the break. Did I get a defective one?
It sounds like you may need an LED Flasher Relay if you don't already have one.
How would I incorporate my stock license plate light wire into the current set up? It seems that the plugs here don't provide any solution for that.
It's pretty simple. The four position connector that carries the brown and green wire on our subharness has two open positions for ground and +12 switched by ignition key. The terminals in these MTW110 plugs are pretty easy to remove and swap. When you remove your stock fender lighting connector, get a pin or tiny flathead screwdriver, and unlock the stock license plate light wires out of their connector and move them to the open positions on the subharness plug from the new light.
@@TSTindustries Thank you guys for the quick response! much appreciated!
Sure thing. Have a good weekend.
I am also running into this can you do a video to show how it's done
Only have left signal. Any help ?
Email our Support Team and they should be able to help you out! There's a good chance it's a loose connection but they will take you through the troubleshooting process. Support@TSTIndustries.com
Bought one for my CBR600RR, absolutely love it!
Great to hear!
Comnected everything on my 2019 Grom but only the brake light flashes the integrated turn signals are not doing anything ? Did I miss something ?
Did you install an LED Flasher Relay?
@@TSTindustriesYes
My brake light does a quick 2 or 3 flashes then becomes solid but no turn signal response.
Never mind figured it out loose OEM connector cable that attaches to TST connector under the seat. All is well love it !!!
excellent explanation really fun video thanks 👍
Glad you liked it!
I bought the relay for your guy’s flush mount turn signals. Do I still need to buy another for the taillight?
No, only one relay is needed for your entire bike.
@@TSTindustries great thank you!
I didn’t see you change a relay here. Do I need the load balance resistors AND a relay?
If you use a relay do not install the resistors. We have a separate video showing the relay installation on this bike.
When I brake it flashes but stay flashing it doesn’t stop. Is this because I need a new flasher?
No, this is because the tail light is in a mode that does that. You can press the program button to change the light patterns. Here is a video we made about the program button and light function: th-cam.com/video/o-XEvWhVNho/w-d-xo.htmlsi=S_x6zrW2XU8llvlQ
-BR
for this install is there a seperate relay I need just for the tail light? I already have the tst relay upfront for the flushmount signals.
Only one relay is needed to control your entire signaling circuit (front & rear) so you will not need any additional components for this install.
thank you very much! Bought the bike and was given what I'm guessing was a cheap ebay light, got the signals to flash but brake light remains lit up, tried switching wires on hand brake switch and adjusting foot brake switch. Just purchased this light this morning!
Can I still add the TST LOW PROFILE LED REAR TURN SIGNALS with these for more visuality? How would I do that if i can?
This is technically possible but will not be plug and play. The signal leads from the tail light will have to be spliced in to the positive signal leads that go to the low profile signals
TSTindustries spliced it. Looks great thanks!
Will an fender eliminator and this tail light work for an 2020 honda grom?
I got a get bent wheelie bar and license plate holder and mine works perfectly fine
So this requires 0 cutting or any additional pieces to fit on the bike? Simple plug and play?
Yep. Completely plug-and-play. No cut corners in this video.
Just installed mine very easy to do however when I apply the rear brake it doesn't light up. Any thoughts/suggestions
The best place to get help with your TST parts is our support department accessible through our website. Typically we hear about this symptom when the rear brake switch on the bike is not adjusted properly and it holds the brake light on by default. That way when you press the brake it doesn't get brighter because it is in brake mode already. Please check your rear brake switch and if that doesn't help you please contact our support department.
Will this work with any fender eliminator?
Any fender eliminator that allows the stock tail light to be used. But obviously we prefer ours. ;)
Can I still install the Toce exhaust on that?
The rear brake does not trigger the brake lights, only the front brake does... is this normal?
No, this means your rear brake switch is either disconnected, or adjusted too hard. Check out this video for more info.
th-cam.com/video/3HWdVUyDVXQ/w-d-xo.html