2022 Outlander 570MR BIG GUN EVO U install vlog with WICK-IT PERFORMANCE TUNE!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Installation video of my new @BigGunExhaust EVO U along with my reflashed ecu from @wick-itperformance THE 570 MR is gonna be a KILLER!! While this video is just an install, I cannot wait to show you this combo in action in our next video.....STAY TUNED!
With the WICK-IT PERFORMANCE TUNE :
-WAY better throttle response
-More horsepower
-More Torque
-Rev limiter increased
-Speed limiter raised/removed
-Fuel/Air ratio adjusted to not run lean from factory
-Engine runs cooler
-Fan to engage sooner
"The way they should come off the showroom"
www.wick-itperformance.com
I’ve had the same exhaust now on my 22 570xmr and where the mount brackets are bent to shape to the exhaust they tend to start to crack across the bend till they brake completely off I’ve had to re weld both mounts back on big gun manufacturers bent the aluminum 100-110 degrees knew it was a matter of time before it was gonna happen
Question have you heard any squeaking noise coming from exhaust after a few rides?
No sir ! Absolutely no issues so far. Still love the sound of this thing especially at full throttle 😎
@@Swampsociety_ hell yeah man . After 2 rides on mine( 2022 570 xmr with mrrpm flash) I started hearing a load squeaking sounds where they slide into eachother. And when I swap back to stocke exhaust it's not there. I checked everything and idk why it would cause it
@@FML.P.Jit’ll go away my dad have an 850 and that exhaust made the same noise
@@xmrtahh_ I ended up finding out it was heat shield so I had to shove a little bolt between it and frame
I think the MR does have the 650 engine!
If you can find some proof let me know lol. Everything I’m seeing is only the 22+ 570XMR.
On my 2022 if you look by seat it shows specs and it shows its a 650
Mine too shows to be a true 650cc but from what I’ve heard not all 2022s are true 650 blocks only a few and those few you can buy an unlock card to unlock the rest of the motor from what I’ve heard not sure how true it is far as the card
Does it also fit the canam outlander 450 ?
I see u did the drain plug trick haha
lol I originally did because I felt it was just low on back-pressure like it was clogged a little bit from debris so I let it out and it performed a little better 😂😎
they did my flash and i love it you wanna do a colab
Taylor what’s up bud ! I’d definitely be down to do that , we can show the tune ain’t no joke lol 😎😎 where are you located I’m sure we can find a spot 🤘🏽
Would you get that over a Honda bc idk what to get
I would 100% recommend this because….. mo powa baby 😂 , but seriously it’s gonna come down to your riding style ! From a power standpoint there is nothing that compares to a can am , but Honda boats can be just as fun as well !
@@Swampsociety_ thanks man I watched all of your videos on the outlander just finished them and it looks really fun thanks for the advice
@@poplishous6638 no problem at all boss and stay tuned for more upgrades to the outty 😎😎😎 we appreciate the support !
@@Swampsociety_ np
Whats the song?
Is that exhaust for the xmr
I have been looking at those pipe and can't seem to find anything that specifically says MR
Yessir this one is for the XMR. I just think since the MR is new starting this year in 22 it hasn’t settled in yet. Even when I ordered oil the dealer tried to correct me saying I have an xmr and he didn’t believe me till he looked it up 😂 but long story short , yes it will fit cause that’s the same one I ordered for the 22 xmr
@@Swampsociety_ I sure appreciate it
I really like the videos
I just put the cvtech primary with secondary spring and 29.5 assassinators on mine completely different bike
@@williamackerman2780 I appreciate you watching man! And what’s funny is …. Those are my next 2 mods 😎 sir, you are taking my content 😂😂😂jk
@@Swampsociety_ look forward to see how you like it
When yall gonna start selling your shirts?
🔥 Nice toy.!!!
I appreciate it man ! 😎😎😎💪🏽