Im looking to get these 29s for my 570 but don’t really want to get a clutch kit, do you think it would be ok to just run the tires and floorboards? Great video!
I'm with a couple of people on here, gates belt, cvtech primary and a good secondary you'll wonder why you ever even tried the stock clutches. My tire choice was really light but I only had one spot that my bike didn't really have all I needed but hind site was the spot I hit was a spot that a track hoe dug about 30 foot down and backfield it with red clay and it looked like a dried lake bed. I knew it was gonna be bad but not that bad. It took 2 sxs winching and 2 people pushing to get it out. I hit it at like 25 mph and I stopped dead in about 6 feet. And amazingly it hated to do it and it was on the verge of slipping but it did spin them granted very slow. But I ride in lots of slews and clay since I live and ride next to river bottoms. I loved them. But I had cvtech "clutched" for 33s, hmf, optimizer, and air filter. Paired well with the all skinny 31s, and much much better belt life. All for about $650 with 2ndary spring and new belt and housing gasket.
And with my xmr 570 and all I had done I could walk on 650 can ams on 28 ol2s in races with ease. In the mud or racing I didny have another close to same cc size bike even get close. Brute force 750s, can am 650s, grizzly 700s on 32 backs, 570 Polaris, it was a beast still had the off idle dead spot tho. I dont recommend it for most but I went to the local air port and got airplane fuel mixed it half and half with 93 pump gad and everyone will tell you not to do it but you wanna talk about a beast 🤣🤣 I tried it 2 or 3 times and it was always a blast. And smells hella good too
question. i got the same 570 , and i was wondering, does your bike have any struglles pulling them , if so could you plz give me a detailed thing., hope your having a blessed day
It doesn't struggle to pull them at all the only thing I would say you have to be carful of is when you put it in reverse in thick mud it can smoke the belt. Overall it can pull them just fine but if you got a clutch kit it would pull them even better.
2020 outty 570 6" lift and 32" assassinators only thing I did was a clutch kit it turns then great I lost more after I did the lift then I did going to the 32s before my lift it would wheelies for days on the 32's after lift had to really try to get it on the back tires
@@MudPioneer so I tuned my clutch before my ride yesterday I put 14 g weights and a 1020 spring and my 570 stands up no problem now and I didn’t loose a lot off top speed was able do 65 mph , but I def recommend this set up
Great looking bike!
I also have the CVTech primary clutch and it’s worked wonders w my bike as well.
Thanks
Damn son! That's one clean ass 570
thank!
Cleanest 570 I’ve seen bub!
thanks
Im looking to get these 29s for my 570 but don’t really want to get a clutch kit, do you think it would be ok to just run the tires and floorboards? Great video!
I'm with a couple of people on here, gates belt, cvtech primary and a good secondary you'll wonder why you ever even tried the stock clutches. My tire choice was really light but I only had one spot that my bike didn't really have all I needed but hind site was the spot I hit was a spot that a track hoe dug about 30 foot down and backfield it with red clay and it looked like a dried lake bed. I knew it was gonna be bad but not that bad. It took 2 sxs winching and 2 people pushing to get it out. I hit it at like 25 mph and I stopped dead in about 6 feet. And amazingly it hated to do it and it was on the verge of slipping but it did spin them granted very slow. But I ride in lots of slews and clay since I live and ride next to river bottoms. I loved them. But I had cvtech "clutched" for 33s, hmf, optimizer, and air filter. Paired well with the all skinny 31s, and much much better belt life. All for about $650 with 2ndary spring and new belt and housing gasket.
And with my xmr 570 and all I had done I could walk on 650 can ams on 28 ol2s in races with ease. In the mud or racing I didny have another close to same cc size bike even get close. Brute force 750s, can am 650s, grizzly 700s on 32 backs, 570 Polaris, it was a beast still had the off idle dead spot tho. I dont recommend it for most but I went to the local air port and got airplane fuel mixed it half and half with 93 pump gad and everyone will tell you not to do it but you wanna talk about a beast 🤣🤣 I tried it 2 or 3 times and it was always a blast. And smells hella good too
question. i got the same 570 , and i was wondering, does your bike have any struglles pulling them , if so could you plz give me a detailed thing., hope your having a blessed day
It doesn't struggle to pull them at all the only thing I would say you have to be carful of is when you put it in reverse in thick mud it can smoke the belt. Overall it can pull them just fine but if you got a clutch kit it would pull them even better.
What year is it
@@cardboardtruck1009 2022 xmr 650 with costom tune and white spring in se I fart
Did u have to put spacers or a lift on it for them not to rub or are they good
I have a 2 inch puck lift and floor boards and I clear them by a lot, so you would be fine with floorboards or maybe even stock
Where did you buy your lift from?
Like the Grey!!!
Nice machine bud do a clutch kit you will enjoy it best nod ever
I have one now and its way better
Do you need to buy new floorboards for them to fit or will they fit with stock floor boards?
2020 outty 570 6" lift and 32" assassinators only thing I did was a clutch kit it turns then great I lost more after I did the lift then I did going to the 32s before my lift it would wheelies for days on the 32's after lift had to really try to get it on the back tires
We’re did you get the color matched can am outlander stickers
If I get these do I have to get a clutch kit or no?
Cv tech clutch changed my 570 a lot was the best purchase I’ve made yet for it 2017 renegade 570
That's what I have heard from people, right now I smoke my belt in reverse in thick mud so a clutch is defiantly on the list
@@MudPioneer so I tuned my clutch before my ride yesterday I put 14 g weights and a 1020 spring and my 570 stands up no problem now and I didn’t loose a lot off top speed was able do 65 mph , but I def recommend this set up
@@The_570_king sweet, thanks for letting me know ill defiantly try that out when I get a clutch kit
@@The_570_king could you send a link to that spring?
You think i could run 27/12/12s on the back of my outlander 570 without to much power loss and no fitment issues?
Where did I get your halo for your front lights. The small plastic part that doesn't have a light there
Are u gonna get a clutch kit
Idk yet, ill have to see if I have problems with smoking my belt.
naters before an exhaust🤣 jokes but its sick man
Its impossible that they weigh 59lbs mounted. No wheel is that light. Id say 69lbs on those wheels
Beautiful bike
thx
Yo where do you get those circle light in the front
Far mudding
Can you get it up on a wheelie or no
yes but it has to be coming out of a water wheelie
What brand floorboards are those?
wildboar
What mods you have put on it
How much for the bike
How much to get everything powder coated red?
it cost me around 300$ but it really depends on the color you pick, a normal color with no flake in the paint would cost around 150 probably.
What year is it?
2021
you think a stock 570 would pull 28's
Yes
how many inches is it lifted
it has a 2 inch puck lift
14x7 wheels?
I am the 100 subscriber
thanks bud
Pretty sure those are only 53 pounds. Same weight as my intimidator 30x10x14
Your probably right I was going off the shipping label so probably not the most accurate thing.
what size rims
14's assasinators mostly come in 14 inch
Yo Colin is this u?? This is Landon
Ya lol
Sounds like u got a drive shaft squealing
Yep after if filmed this video it broke and ended up replacing both u joints
rip axles
All water no real mud not much of a test for assasinator tires lol
Lol I know, is been none stop rain lately so there's not really thick mud around. I want to bring it to Hogwaller and test it out in the truck pit!
Lololol
No