Hi, Great minibike. I'd love to build one. I can't seem to open your dwg file with any app I've tried. It's just blank. Do you have plans available you'll share?
Socks and sandals thats how I spot a professional welder a mile away! Lol jokes aside tho good job. At the start of the video, I was kinda skeptical with the tape outline but you know what, everyone has a different way that works for them, and I gotta say your way must work damn well cause thats a clean final product especially for being made out of square stock. Subscribed.
Good videos, keep doing them, can you please specify sizes for everything? Also, can you make a video of how to make a water powered vehicle, preferably car or motorcycle? Make sure it has a good alternator to power the hydrogen cell.
Pretty good viedo I'll be watching for more gave a like and a scribe I am the original creator of kart and minibike Amino we give support to our TH-camrs
I noticed while you were welding at times you were holding the gun quite far from the weld, I'm not a professional at welding but I'm pretty sure the closer you hold the gun to the well the easier it is and you have more control
@@gkgt5226 liked the vid and have something similar planned. You have my respect for those welds, they looked amazing for flux core... I can't do wire feed welds at all, I prefer stick or tig because im ok at them... really awesome bike though, I would love to see more stuff like this
@@zragevii4705 Again thank you for the support and kind words. I've never actually tried stick or tig because I don't have the equipment, but hope I have the opportunity to at some point in the future. Good luck with your own build!
@@gkgt5226 if you get a chance, it's worth it... a welding class at my school had stick, wire feed, and tig. Hopefully soon I'll get a welder, until then I'm gonna have to make bolt on brackets
@@zragevii4705 Very cool! I've seen others do some pretty crazy stuff without a welder, so I'm sure you'll do fine. Hopefully, all is well and you can make it work.
Dude straight up built what he wanted with his own hands, hats off to you brother and keep on fabricating!
Hi,
Great minibike. I'd love to build one. I can't seem to open your dwg file with any app I've tried. It's just blank. Do you have plans available you'll share?
Socks and sandals thats how I spot a professional welder a mile away! Lol jokes aside tho good job. At the start of the video, I was kinda skeptical with the tape outline but you know what, everyone has a different way that works for them, and I gotta say your way must work damn well cause thats a clean final product especially for being made out of square stock. Subscribed.
Good videos, keep doing them, can you please specify sizes for everything? Also, can you make a video of how to make a water powered vehicle, preferably car or motorcycle? Make sure it has a good alternator to power the hydrogen cell.
I cant seem to open the files can u tell me ur wheel base measurement sand also the hight of the bike? thank you
how many pieces of square stock did you need
Between 16 and 18 feet of square stock.
Really enjoyed your video and im virkning to make one myself but i was just wondering, how thick and how wide was the metal you used for the frame?
For the most part, I used 1 inch square stock, and it seems to be plenty strong. Good luck with your project!
@@gkgt5226 Thank you 😁
Great idea, with the tape 😄
Hey! Just wanted to say that your video really good and you deserve more sub.
Hey bro it doesn’t show the file , what are the measurements
drive.google.com/file/d/18m9x0rTYh5hXFWAIl8FO96T290nvHu4a/view?usp=sharing
Does that work?
Says I need permission bro
What are your measurements
Could you tell me all the measurements for the mini bike as the file is blank
Where are measurements?
what is the measurement unit for the plans? cm or inches?
Harry.Upton1 inches
Right on for the great build thanks for the info planning on making one from angle iron any time soon 👍
Nice footwear
Excellent ventilation
Las medidas amigo si puedes lo explicas te lo agradeseria desde Perú 🇵🇪
Klissman Sánchez García What exactly do you need clarification on?
what is the length of your top frame and bottom frame
Bottom:
straight section ~ 28in
angled section ~ 6in
Top:
straight section ~ 18in
angled section ~ 12in
I don't mean to correct you nor come across like a prick. Are you sure the measurements are not 18/6 top and 28/12 bottom?, sorry if it's a bother
Pretty good viedo I'll be watching for more gave a like and a scribe I am the original creator of kart and minibike Amino we give support to our TH-camrs
Lomsome's Garage Thank you! The support is much appreciated.
Just curious why people call it square stock? I’m a welder by trade and when I hear “square stock” I think square bar stock not square tube.
Nice frame though, I’m thinking about doing the same what thickness did you use?
What are you mesurments
I noticed while you were welding at times you were holding the gun quite far from the weld, I'm not a professional at welding but I'm pretty sure the closer you hold the gun to the well the easier it is and you have more control
Good job in the future better use proper equipment though did you atleast have a helmet?
Yeah, I always have at least a helmet.
Nice job bro
Thank you!
Out of curiosity, was that flux core wire?
Zrage VII Yes, it was flux core. Thanks for the watch!
@@gkgt5226 liked the vid and have something similar planned. You have my respect for those welds, they looked amazing for flux core... I can't do wire feed welds at all, I prefer stick or tig because im ok at them... really awesome bike though, I would love to see more stuff like this
@@zragevii4705 Again thank you for the support and kind words. I've never actually tried stick or tig because I don't have the equipment, but hope I have the opportunity to at some point in the future. Good luck with your own build!
@@gkgt5226 if you get a chance, it's worth it... a welding class at my school had stick, wire feed, and tig. Hopefully soon I'll get a welder, until then I'm gonna have to make bolt on brackets
@@zragevii4705 Very cool! I've seen others do some pretty crazy stuff without a welder, so I'm sure you'll do fine. Hopefully, all is well and you can make it work.
hi i cant open your file its just black..
Do you have the Inventor software?
@@gkgt5226 i got the viewer and it turns black?
how did u find out what angles to cut for the uprights? like u said u don't know what u were doing.