But he has no penetration with his welds are very surface level they will never last 1 good bump or having to slam on the brake he will be walking, he only knows how to tack weld repeatedly, if your doing tutorial videos teach the right shit
I hope you don't hit an immovable object, because that steering 'column' will core you like an apple. It was a common fault in American cars in the 30's thru to 60's. Otherwise go Lithium for long lasting power
We call it ticky tack welding at work or 'sam' welding after a welder named sam who would weld everything fucking like that. You can kinda get away with it on thin material with a mig but it's very prone, to cracking, cold role and inclusions. If done carefully it can be ok when welding oversized gaps on non critical or low stress welds but really it's just shit and only slightly better than glueing shit together
At maximum power that motors with that size of back wheels it should be able to reach at least 80km/h (45mph) , depending on the gear ratio from the motor to the wheel, pretty Nice job, very good idea the double wheels and that motors are monsters be careful if you gonna use higher voltages
Instead of alternator better buy a cheap broken hoverboard and use the motors.To modify an alternator is more expensive because you need to buy the magnets and separatedly they cost a lot more than getting allready made motors from hoverboard.
Fun build Brother, but would suggest adding some support to the outer axle points. Those bike axles aren't designed to have weight applied to only one side. Especially if you over volt those motors! If the chain were to break when a back wheel snaps off at the axle...very bad things could happen! Like ...cut your arm or leg off kind of "Bad"! Be safe Brother! it's hard to build without hands! ;)
Simple, easy and fast.the battery is actually better for the weight.the best.now can you please show how to make that motor? If possible. Like from nothing.
The thing is you get some trade-offs with wheel size. For uneven ground small wheels are dangerous, like with small wheels on scooters they are known to be rather unstable, where with larger wheels you have less rigidity. This is why people ultimately go for larger alloy wheels. If you want to go faster then you'll find this becomes more of an issue. Aerodynamics will also need to be considered. It's quite easy to knock up with some fibreglass fairing. Being low to the ground is good though.
If you have suspension and differential would be much better for softer & smoother ride ! ! Moreover, Safety feature is the MOST IMPORTANT factor for any build.
Yung aso! yung aso! :D Nice works Sir Albert! Planning to build one but having it as a stand up scooter, 4 wheels pa rin. ilang mm un thickness ng GI Tubular na gamit nyo Sir? Anong controller yun gamit nyo na may potentiometer (see 6:48 timeline) ? Thanks and stay safe Sir!
Welcome . We show you to make an electric generator that works from the rear wheel of a bicycle. It means an electricity generator by working on the bike and producing electricity from it
Albert, instead of capping the ends of the box why not curve them and sit the hubs in the recess? And, how about a smart potentiometer to create a differential function? Good work!
yeah it could achieve that kind of performance you state with the 60V capable controller you linked in your description but you used an 80A rc car controllers which are in no way capable of handling the current load you have....
Nice built! Sir Albert is a very humble and kind person. Salute to you sir!!!! Thank you so much for helping me with my bike batterry problem. 😎
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
This was so refreshing 2 see stick welding, just tired of everyone picking up a MIG welder
But he has no penetration with his welds are very surface level they will never last 1 good bump or having to slam on the brake he will be walking, he only knows how to tack weld repeatedly, if your doing tutorial videos teach the right shit
@@jacoblimbaugh9220
.$
Pr que se vence el 5456666666666u46u46666666656655ñ
@@jacoblimbaugh9220Cuál sería el soldador correcto a utilizar?
I hope you don't hit an immovable object, because that steering 'column' will core you like an apple. It was a common fault in American cars in the 30's thru to 60's. Otherwise go Lithium for long lasting power
salam
Amen. Before tilting steering columns many heads were removed by a steering wheel also here in Northern Europe.
This is a go kart not a car for the roads
@@AyyLarry There are immovable objects offroad too.
@@AyyLarry That is a foolish response. Moving objects can hit stationary ones.
Very good! Both of rear tires have their own engines respectively, free from differential gear.
I'm glad you know that it doesn't need differential gear 😁
@albertnario4877 what's the maximum speed?
Nice next add shocks
Well this man takes power to weight ratio seriously... ⚡💯
Interesting welding technique. Guessing there is more than just tacks holding it together?
We call it ticky tack welding at work or 'sam' welding after a welder named sam who would weld everything fucking like that. You can kinda get away with it on thin material with a mig but it's very prone, to cracking, cold role and inclusions. If done carefully it can be ok when welding oversized gaps on non critical or low stress welds but really it's just shit and only slightly better than glueing shit together
Hes doing a really nice job considering the fact that hes using an arc welder
Good build👍🏾, my daughter would love that!
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
At maximum power that motors with that size of back wheels it should be able to reach at least 80km/h (45mph) , depending on the gear ratio from the motor to the wheel, pretty Nice job, very good idea the double wheels and that motors are monsters be careful if you gonna use higher voltages
that's why I only use 12v 😅
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
It will never go 45mph on 12v battery
Using outrunner motors wow
WOW! I love it! The next step would be to use a solar panel. Fantastic job bro! Simple, perfect.
รวยๆเฮงๆปังๆ ติดตามแล้วจ้า ติดตามยายด้วยจ้า
มิสนี แซ่บเวอร์ ขอบคุณมากๆ
Finally a diy person who says what the items are so I make make my own...great job love it btw!
That is genius. I will do one like that, but using motor I made out of alternator. Thanks man.
Instead of alternator better buy a cheap broken hoverboard and use the motors.To modify an alternator is more expensive because you need to buy the magnets and separatedly they cost a lot more than getting allready made motors from hoverboard.
@@mihaiilie8808 how about using motor starter?
@@latebloomer2 thats bad because it has brushes.Brushless motor from hoverboard is the best.
The best and easiest project I've ever seen!!! Great Job!!! Congratulations from Brazil!!!
Fun build Brother, but would suggest adding some support to the outer axle points. Those bike axles aren't designed to have weight applied to only one side. Especially if you over volt those motors! If the chain were to break when a back wheel snaps off at the axle...very bad things could happen! Like ...cut your arm or leg off kind of "Bad"! Be safe Brother! it's hard to build without hands! ;)
vbmncZ
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
Ya, I'm sure that they've busted off by now.
？
0
Bravo mate, what a tidy job, and using those hubs for steering is a VERY clever idea! 🏆⚒️🇬🇧
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
Good job
Интересная конструкция с сдвоенными колёсами, лайк, молодец!!!
6 6 г он
Buen proyecto, felicitaciones, falta cubierta de cadenas y algo de suspensión 👍👍👍🤩 desde Tepic Nayarit MÉXICO
Antonio buenas noches, me podrías enviar las medidas y tipos de herramientas para armarlo por favor gracias.
bạn chế nhiều xe máy cho anh em xem nhé, cảm ơn 😍😍😍😍👍👍👍
Saludos desde la República Dominicana excelente vídeo
Nice build but, it needs some improvements. A suspension, outer part of the hubs need support, a brace closer to the steering wheel.
Your wheel bolts need support from both sides to keep from bending. Other than that great build
That's the first thing I noticed "the bolts", but like you said "good build!"
This car have break
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
Cool! Imagine what this go kart could do with a 12s li ion / lipo battery and esc😃
😍
Awesome brother love from India
Ахах 😁🤣😂 0:49, он использовал монтажный профиль! Гениально 👍👋
add motors to the front wheels too!
Very good. Great fabrication and problem solving skills.
Steering column = the impaler!!! Fun project tho.
Cuál es la columna de dirección y por qué empalador
Without Suspension it will be a Bone shaking experience any way nice attempt for a raw vehicle.
Mantap bang
Nice build, have you considered having a sprung seat to give a more comfortable ride?
nice job. bet you wouldn't mind some suspension.
Sir may challenge ako sayu. Pwede mo gawan ng self charging yung e bike mo.
Galing mo talaga idol. Another great build. Pero matagtag sya sakit sa puwet haha. Keep on doing marvels idol.
hnd nmn ganun ka tagtag. saka malapad nmn yung upuan. hnd katulad ng bike.
I love how these videos make it look easy,,,I'm sitting at like IM GONNA BUILD ME ONE,,,and don't even have a angle grinder
Very creative and easiest. From India,Thank you bro.
Só cuida pra não bater, Genius ..👍👏
Good job pal😊👍 can add additions to carry and work in crop harvest👌
Olha meu querido vc tira onda mesmo mim em sina
Sangat kreatif dan inspiratif..👍
May we kwon what sprokes and motors are You using ?
OTTIMO lavoro
👍👍👍
Bro,amazing! you are a genius!
Tell him his motors are capable of 14s...
Gave me some good ideas. ... bit of inspiration you could say. ...well done.!
Nice welding skills bro
( al'islam)
(the secret of happiness)
(أشهد أن لا إله إلا الله وأن محمد رسول الله)
Simple, easy and fast.the battery is actually better for the weight.the best.now can you please show how to make that motor? If possible. Like from nothing.
Yoo yoo you should take this out especially after havy meal this will make your system digest your meal quite well and quickly😂😂😂
you are a good welder, in youtube is something unusual
Love the creativity. Nicely done.
awsome idea doubling the wheels💗 thank you💗💕💕
Bravo.Foarte.succese multe.💟💟💟💟💟💟🤔🤔🤔
Very good work and cool looking
Makasih ilmux om, kreatif banget.
Look ma, no brakes!
Good work..l love it thanks..muy buen trabajo me encanta... saludos cordiales
creative,i like it 👍👍
Good idea...but i think if you add with suspension more better...
Malou 😎
Creativity is awesome.
I like the concept but can you add a pedal so you can charge your battery while paddling and also your other devices.
Just saying. 😉👍
The thing is you get some trade-offs with wheel size. For uneven ground small wheels are dangerous, like with small wheels on scooters they are known to be rather unstable, where with larger wheels you have less rigidity. This is why people ultimately go for larger alloy wheels. If you want to go faster then you'll find this becomes more of an issue. Aerodynamics will also need to be considered. It's quite easy to knock up with some fibreglass fairing. Being low to the ground is good though.
This is pandemic efect... Good job!!!
( al'islam)
(the secret of happiness)
(أشهد أن لا إله إلا الله وأن محمد رسول الله)
If you have suspension and differential would be much better for softer & smoother ride ! ! Moreover, Safety feature is the MOST IMPORTANT factor for any build.
Nice build. Good job buddy.
If you use showker or suspension in this ev then it will be more awesome by the way awesome🔥👌
Awesome sir but dogs will come with us when we drive in public 😂
It’s a good prototype but if you hit something that steering column is going through your chest...
I was thinking the same thing. Impaled through the chest by the steering rod!😣
For science
Be careful from the angry dog😂
they hate bldc motor. chase by dogs too with my DIY esk8 6354 bldc flipsky.
Yung aso! yung aso! :D Nice works Sir Albert! Planning to build one but having it as a stand up scooter, 4 wheels pa rin. ilang mm un thickness ng GI Tubular na gamit nyo Sir? Anong controller yun gamit nyo na may potentiometer (see 6:48 timeline) ? Thanks and stay safe Sir!
tunog f1 sir!!! iwan ang aso nice!!!
How much of cost to this project
SENSSASSUONAL PARABÉNS PELO BELÍSSIMO TRABALHO FICOU BOM TOP
This is amazing, can you make videos like this
Ficou Perfeito Ótimo Meus Parabéns 👏 Deus te Abençõe 🙏🙌
👏👏👏👏👍👍👌👌👊😉 Fantastic!!
Crude but effective! Good job.
Very nice😊
7:45 haha, so this is where Tesla got inspiration for their new yoke steering wheel from
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
VOU FAZER 😎🇧🇷🇧🇷
Mete um 2 em 1 no motor eletrico😂
👍💪🇧🇷 blz !
Vc conseguiu comprar esses motores?
@@DefonsoAlves ,,,,,,,,,,,,,,,,,
Esses motores tem no Aliexpress
Welcome . We show you to make an electric generator that works from the rear wheel of a bicycle. It means an electricity generator by working on the bike and producing electricity from it
No brakes?
Great idea, but no "differential" any issue with that ?
it drives by two separate motor.. no issue on it
🐕 chasing albert😂8:14
it twice 😂
@@albertnario4877 albert next time carry some dog biscuits with you buddy.
Muito criativo parabéns.
Gostei muito se um dia eu montar um desse reforçaria o eixo traseiro com um garfo travando os dois lados do eixo.
th-cam.com/channels/IVZgpUSCq8A8yQG10ewhIA.html
Wow 👏 😮 it's the simplest go cart I've ever seen, but yeah watch out for your chains ⛓ 🔗 . They're dangerously close to you.
Albert, instead of capping the ends of the box why not curve them and sit the hubs in the recess? And, how about a smart potentiometer to create a differential function? Good work!
If thats what you think would be good for improvement, go and build the one you like for yourself.
Hey there. Just curious as to where you got the back wheels. the 14” ones? Or what they are off? Thank you
from bike shop, commonly it use on kid bikes.
very cute! very beautiful & useful.
do you supply this device to Northeast India? how much rupees will it charge?
esta muy bueno te felicito cuando pueda voy a fabricar uno
yeah it could achieve that kind of performance you state with the 60V capable controller you linked in your description but you used an 80A rc car controllers which are in no way capable of handling the current load you have....
Excelente, felicitaciones, un video algo similar para niños de 4 a 8 años de pedales, 😉
Es la copia buena del cartel de vicesat creo
U r really engeenier very nice kit price please reply in Indian rupees
Now he can finally go to work.
Amazing... good job...
Nice and convenient BUT Ouch!! No suspension.
Ingenious! But those welds …
PS add a foot guard to protect your feet!
Good!!! But with suspension better )))
लय भारी 👍👍👍👍
Very nice build!!!