Amazing truck men, i also have a 6 spd and wanted to know what parts were used to make your transmission strong if you don’t mind asking? Thanks in advance
Love this sound you can just hear the monster. I got borla catback atak and jba shooeties( longtubes are on hold due to a few other things) so how do you like this cam on yours. I got 2021 ram that I’m looking to have calmed by Jay. He already tunes for me. I’m just going around asking everything that has his products what they think. Performance? Sound? All around opinions?
What size tire are you running in this video? I've seen a bunch of your vids that's it's a 28 inch tall what's the width and aspect ratio if you don't mind me asking?
B Chandler I’m in Houston, look up Darkhorse Performance in Spring TX, tell them I send you “Robby” and you should be able to get the swap done for around $1300 plus your parts and fluids etc
Mauro Jr. Ruano Cam install will run $1000-$2000 depending on where you go. And Cam picked up a good amount of power and it’s definitely worth it! I am actually going with a bigger Cam and stall soon.
Mauro Jr. Ruano Yes this is the Stage 2 LL Low Lift Camshaft. Runs great and is definitely better than stock, very noticeable gains in power mainly top end.
@@svge3025 i recommend getting the 4link relocation brackets from moe cause your drive shaft is pushed up and your rear wheel is no longer in the center so at high speed it begins to hop look up IHC Suspension on youtube he explains it on the hemis he has a massive beared cant miss him lol
Beautiful truck 😻
Amazing truck men, i also have a 6 spd and wanted to know what parts were used to make your transmission strong if you don’t mind asking? Thanks in advance
Reported for pornography
What nitrous kit are you running?
Christmas Gummyworm Nitrous Outlet Plate Kit, just have a NX bottle sitting in the back right now.
Sounds nice !
Love this sound you can just hear the monster. I got borla catback atak and jba shooeties( longtubes are on hold due to a few other things) so how do you like this cam on yours. I got 2021 ram that I’m looking to have calmed by Jay. He already tunes for me. I’m just going around asking everything that has his products what they think. Performance? Sound? All around opinions?
I’m about to cam mine with a stage 2 ll 204/222 .55x/.55x is that what u running ?
What kind of exhaust tips do u have on your ram?
Sounds like a beast!
More videos on this truck please
Hey man wasn’t you at the Paul walker meet in Houston
Truck sounds mean! What’s the brand and specs?
what muffler are you using?
What size tire are you running in this video? I've seen a bunch of your vids that's it's a 28 inch tall what's the width and aspect ratio if you don't mind me asking?
Talkshitgethit69 this is a 275/50/17 M&H racemaster Drag Radial. About 27.8 in tall if I remember
How much hp did you gain over stock with cam ? Im deciding on getting one
sly r not sure. But these Cam is made for a way better tq curve and is definitely noticeable and made a difference
You said that you have a built 6 speed trans and my question is did you get it rebuilt or did get the trans from a shop?
Eloco lopez I had a shop take the trans out an completely rebuild it
SlobraFTW thanks bro
Awesome man. What are the tire specs? Looks awesome man. Is your cover the switchblade or jackrabbit ?
Louie Leos I think switchblade, not sure. They are 275/40/17 M&H Drag Radials, I appreciate it
SlobraFTW whats your best 60' ?
👩❤️👩
Brooo sick ass ram!
Btw where did you get those headlights?
GatMan077 appreciate it, I got them off eBay for $100. If you want to see more follow me on Insta, @ slobraftw
Sir, If you are in the DFW area of TX, what shop did you use for your installation & how much did it run you if you don't mind me asking.
B Chandler I’m in Houston, look up Darkhorse Performance in Spring TX, tell them I send you “Robby” and you should be able to get the swap done for around $1300 plus your parts and fluids etc
@@ModernStreet101 Thank you Sir.
Did the 204/222 cam REQUIRE tuning?
Bad ass ram bro... how much was it to install the cam ? I'm thinking about going with a Greene racing cam... what's your opinion on the cam ?
Mauro Jr. Ruano Cam install will run $1000-$2000 depending on where you go. And Cam picked up a good amount of power and it’s definitely worth it! I am actually going with a bigger Cam and stall soon.
SlobraFTW which cam do you have ? The low lift cam ? And I admire your ram bro
Mauro Jr. Ruano Yes this is the Stage 2 LL Low Lift Camshaft. Runs great and is definitely better than stock, very noticeable gains in power mainly top end.
Badass truck, what's your wheel setup?
Harley Reyes just stock 17” aluminum wheels I painted black
What bed cover and wheels do u have
Louie Leos It is called a Pace Edwards Bed cover and they are some Stock 17” wheels I prepped painted and gloss clear coated.
I get tons of wheel hop in my ram do you know anything i can do to stop that
Do you by any chance have a 2/4 drop?
@@hemilife7629 yes sir I do
@@svge3025 i recommend getting the 4link relocation brackets from moe cause your drive shaft is pushed up and your rear wheel is no longer in the center so at high speed it begins to hop look up IHC Suspension on youtube he explains it on the hemis he has a massive beared cant miss him lol
@@hemilife7629 Thanks ! Much appreciated !
what wheels and size? looks fkn sweet 👍
G Dawg just some stock 17's I prepped and painted with a rattle can haha. Thanks
What are the wheel dimensions?
where can i buy the bully net ??
eBay, some auto parts stores carry them
How are you passing emissions?
In TX if you don't throw any codes you pass. They're supposed to look under the vehicle to see if you have cats or not but no one does.
@@mrb2917 do you take it to get inspected with your tune or do you go back to stock tune for the day?
I wanna catch a run 👀
Julian Herrera When, follow me on Instagram a send me a message @slobraftw
stage 2 low lift cam?
Christien Diezyn yes, 204/222 Cam
cool man thanks deffinaly what ill be going with... did you just do cam swap or did you need to swap springs too
Christien Diezyn You'll need the Cam, Pushrods, Shims and Hardened Pushrods, Springs and you'll be set and safe. Won't regret it.
Nice bro, who’d you buy the kit from?