Guys, for those who didn’t have those lines after installation, you need to put them manually before the installation and then delete after it’s installed. It worked for me
Hi thanks for the video, just wondering I have almost the same problem but with the connection of the licence it's says "Unable to reach the licensing department. Please check your internet connection and network settings!" Do you know what can I do ?
Here's the Solution! 1. Make sure to uninstall your current Enscape (On search bar, Type Add & Remove Program. After that Search "Enscape" and click modify > Remove/Uninstall) 2. Open your hosts file again and add those exact lines (if you dont have any) 3. Install your Enscape again 4. Now, You can delete again those two Enscape lines from hosts file. Hope this helps!
Try following these steps: Open notepad in the search field > notepad > Run as administrator > File > Open > Select drive C > Windows > System 32 > drivers > etc > replace the “text document” option with “All files” > double click on the HOSTS file > delete localhosts > exit & Save . finished
1. You just type Notepad in the Windows search field. After that right click > Run as Administrator 2. After that in Notepad, click File > Open > and browse to C:\Windows\System32\Drivers\etc\ 3. Here you may not find anything, because it's right next to the File name column, select All Files. 4. As soon as the various files inside are visible, select the Hosts file > Open > select the text you want to delete > then save > done
@@n-7766 1. Click START and type FOLDER OPTION then press enter on the keyboard. 2. Next go to the VIEW tab Scroll down and uncheck the HIDE PROTECTED FILE OPERATING SYSTEM FILES option. 3. Then click APPLY and continue pressing the OK button 4. Done, now try to see the HOSTS file must have been detected
as a suggestion, after redirecting or editing the hosts file, it would be better to re-check the options in the options folder earlier. because there will be many folders or even hidden files that will appear so that comfort can be disturbed
tengo el mismo ´problema, funciona también para ensacape 2024 pq hago el mismo proceso y me va saliendo todo bien pero ya al final trae mucha información de 127.01.01 y los que eliminas no me aparecen , será que es mas actual? estaba en eliminar todos al menos la secuencia de esa numeración , pero mejor te pregunto, agradezco si puedas ayudarme
Try following these steps: Open notepad in the search field > notepad > Run as administrator > File > Open > Select drive C > Windows > System 32 > drivers > etc > replace the “text document” option with “All files” > double click on the HOSTS file > delete localhosts > exit & Save . finished
Writing from Sao Paulo in 2024 to say that this saved me on my Enscape 3.4! Thank you very much!
Guys, for those who didn’t have those lines after installation, you need to put them manually before the installation and then delete after it’s installed. It worked for me
Hey , what is the exact text that we need to put before installing?
@@NithinJois-qc9od these two host lines starting with 127, just like in video. But instead of deleting, you type them in, install, then delete.
@@linamilovidova5235 thankyou very muchhhhhhh ❤❤❤
You are the people we always look for, THANK YOU SO MUCH BRO
Hello Armil Dalip, I'm using revit 2021 and enscape 3.0, but my hosts file has no enscape written inside, what can I do? any thoughts? Thanks!
Same problem dude
did you manage to solve it by any chance? :c @@DivineAegon
Chingón hermano, gracias.
Absolute legend! thank you
when I open the host file. mine doesn't have that line on it and still doesn't work
Hey. Did you find a solution to fix this? I am facing the same problem
When I first installed it, I was told to enter it in the host file.
I didn't know that was the problem.
Thank you so much.
U r a life saver broo🥺🖤
Hi thanks for the video, just wondering I have almost the same problem but with the connection of the licence it's says
"Unable to reach the licensing department.
Please check your internet connection and network settings!"
Do you know what can I do ?
how do you fix?
Muchas gracias, no sabes hasta que punto me has ayudado!!! Estaba desesperado!! MIL GRACIAS!!!
Gracias, probé con la versión 4.2 de Enscape y si funciono!
Thanks, I was try 4.2 Enscape version and work it!
THANK U SO MUCH, i tried this on my enscape 4.1 vers and it works wonderful
From where i will get escape 4.1 version
Não funcionou para mim! Existe outra forma ? Por favor
GRACIAS!, funcionó para Revit, no se exportaba nada a Enscape, esto solucionó el problema
Even doing all the steps as explained, in "hosts" there is nothing related to enscape
I feel you bro :(
Why there is so little solutionss D:
Here's the Solution!
1. Make sure to uninstall your current Enscape
(On search bar, Type Add & Remove Program. After that Search "Enscape" and click modify > Remove/Uninstall)
2. Open your hosts file again and add those exact lines (if you dont have any)
3. Install your Enscape again
4. Now, You can delete again those two Enscape lines from hosts file.
Hope this helps!
Muito obrigada!! Resolveu meu problema com a biblioteca do enscape! THANK YOU🙏🙏✔️
You are a areal Super Hero for me, Thank You so much
Thanks bro! its working!!!
Gracias por la ayuda🙌🏼🙌🏼
cant save the text on the folder. it says i dont have access. what should i do
i have the same problem, did u find any solution?
It worked well on 3.5.6 version. Than you so much!
it doesnt work on me, i deleted those lines and still not working. My enscape version is 3.1 too
what could i do when i want to save it but it turns out to 'save as' and didn't change the file instead creating a new file of hosts. any suggestion?
Try following these steps:
Open notepad in the search field > notepad > Run as administrator > File > Open > Select drive C > Windows > System 32 > drivers > etc > replace the “text document” option with “All files” > double click on the HOSTS file > delete localhosts > exit & Save . finished
uncheck the read only on the hosts properties
@@iamcetyoo I really appreciate your little hint!!!! You just saved my life ❤️❤️❤️❤️ god bless you
@@iamcetyoo asi me soluciono el problema de no poder guardaaar, graciaaaaas.
i have no 'hosts' file in etc folder, how can i do?
1. You just type Notepad in the Windows search field. After that right click > Run as Administrator
2. After that in Notepad, click File > Open > and browse to C:\Windows\System32\Drivers\etc\
3. Here you may not find anything, because it's right next to the File name column, select All Files.
4. As soon as the various files inside are visible, select the Hosts file > Open > select the text you want to delete > then save > done
@@ArmilDalip i found other files, such networks, protocal, services, mhostssam. but no hosts file.
@@ArmilDalip i found other files, such networks, protocal, services, mhostssam. but no 'hosts' file.
@@n-7766 1. Click START and type FOLDER OPTION then press enter on the keyboard.
2. Next go to the VIEW tab
Scroll down and uncheck the HIDE PROTECTED FILE OPERATING SYSTEM FILES option.
3. Then click APPLY and continue pressing the OK button
4. Done, now try to see the HOSTS file must have been detected
as a suggestion, after redirecting or editing the hosts file, it would be better to re-check the options in the options folder earlier. because there will be many folders or even hidden files that will appear so that comfort can be disturbed
Thank you so much! Saved my deadlines!
I dint have the enscape on the host already, still doesnot work! :(
LOVE U BRO!!!! THANK U SO MUCH, MARCH 2024 AND IT WOKS!!
THANK YOU SO MUCH!!
You saved my life... Thank you ! ... 👏👏👏
YOU´RE A GENIUS! TKS
Thank you so much to create this video! So happy it works well on 3.3 version! 👍
tengo el mismo ´problema, funciona también para ensacape 2024 pq hago el mismo proceso y me va saliendo todo bien pero ya al final trae mucha información de 127.01.01 y los que eliminas no me aparecen , será que es mas actual? estaba en eliminar todos al menos la secuencia de esa numeración , pero mejor te pregunto, agradezco si puedas ayudarme
THX A LOT MY DEAR FRIEND 🙏🙏🙏🙏🙏
I SO BIG THANK YOU FOR THIS.
thanks a lot, your video was very helpful
Muchas gracias, de verdad me ayudó este video
Sir i wanna download Offline Assets Library but when i click on it , It show some error. Could you plz help me how to fix that?
Thank you🎉🎉
Me ha funcionado!! muchas graciaaaaaaaaaas
thank you
It is showing that I can't save changes in this location without the administrator's permission
Sos un crack!
OMG IT WORKS, THANK YOU SIR
Thaaaaankyouuu. U save my work lol! i love u
Geniussssssssssssss!!!! thanks a lot broda!!
can it be done with revit?
i didnt see enscape in host? any help
Same, can anybody please help?
Restarted the pc?
change the search file from "text document" to "all files", and make sure you in the right folder
Tanks .. you best!!!
thanks. big help.
thx dudee, you save my life
thank you, God bless you brother
Boa tarde, o meu não funcionou, já realizei até a instalação novamente do programa, consegue me ajudar?
como posso ajudá-lo?
i missing material library 3.5 and follow this step & its works Thank you
Is this method working with crack versions also ?
saved my life dude!
Thanks so much! it works 🤗
Makasii banyak bangg..
100% work
IT WORKSSSS, THANKS A LOTT!
love you bro ❤
i have same problem and i try another method and it doesnt work, but this method 100% work and easy, thanks creator!! :))
Qual outro método vc tentou? Esse não funcionou para mim
wow wonderful, thank you
thanks for sharing !
you saved me, thanks
Muchas gracias!!!!
I did the same, but it still doesn't working =(
grazie mille! thank you so much, wish you all the best🥰
God bless you!
God bless you to...🙏😇
works in 3.5 too!
GRACIAS!!!
Muchas gracias!! Me funciono con la versión 3.3
hola yo no pude, borre los archivos y nada ...sigue saliendo el error
It worked!! Thank you.
Thanks
ahhh funcionou!! THANK YOU
it's so sad(doesn't work on version 3.5
merci beaucoup
eu só queria dizer que te amo
tks bro i got it
nossa muito obrigado me ajudou bastante
Thank you so much bro!
Thank you this worked!
where did u get tje host
Try following these steps:
Open notepad in the search field > notepad > Run as administrator > File > Open > Select drive C > Windows > System 32 > drivers > etc > replace the “text document” option with “All files” > double click on the HOSTS file > delete localhosts > exit & Save . finished
Muito obrigada, salvou meus projetos
Thx ma brooo
Thanks a lot!
THANK SO MUCH!!!!
thank you so much bro ¡¡
MUCHAS GRACIAS!!!!!!!!!!!!!!!!!!!
Thank you so much 😊
Thank you so much bro🙏
THANK YOU SOOOOO MUCH!
MAKASIH BANYAK kakkakaaa
bg, kalo fitur offline enscape akses nya tidak muncul di pojok kanan bawah, gimana ya solusinya?
Obrigado, resolveu meu problema!
THANK YOU!!
Thanks you somuch brooo 🙏🏻
Istimewa
yes its work thanks to this video and ayberk
sangat membantu thankss bro
thank so much !